Self-designed, hacked-together 3x3 macropad.

• 4 layers configurable with via and selectable by clicking the rotary encoder.
• OLED display to display per-layer text (programmable with tool in cli/).
• Rotary encoder with volume control and layer select button.
• 256Kb EEPROM (24LC256).

• cli/ - Tool to program keyboard (primarily to change OLED text) and change the layer text.
• via/ - Via json config (TODO: merge into via) that can be used for creating custom keymaps in Via (once merged into via, this should no longer be necessary).
• firmware/ - QMK-based firmware (TODO: merge into QMK) and instructions for flashing the firmware.
• hardware/ Gerber file for PCB and STL/3mf for enclosure.

In order to flash a new firmware version, the device needs to be reset and boot into DFU mode for flashing. This can be done in one of two ways:

• Hold down the top left key in the 3x3 grid and plug the keyboard in. The keyboard should enter DFU mode for a period of time that will allow you to flash new firmware.
• If this does not work, you can use the reset button on top of the PCB. You'll need to remove at least the top cover in order to access the button.

See the instructions in firmware/ for more details.

Overview and detailed Assembly instructions can be found in the hardware/ directory.