mikepea / buildbrighton-ir-badge Goto Github PK

Set badge ID (after factory reset, or new badge):

• PLAY

Factory Reset:

• PLAY PLAY DOWN UP PLAY

Infect a badge:

• PLAY PLAY PLAY

38KHz = 1 pulse every 26.315us 8Mhz = 1 instruction every 0.125us => 8-bit clock has period of 32us

560us = 17.5 clock cycles

Pin setup (Trippy RGB Wave):

IRin: PB3: 0b00001000

NEC Signal length: 9000 + 4500 + 560616 = 67260us => 14 per second

From http://www.nongnu.org/avr-libc/user-manual/group__avr__sfr.html: cbi and sbi are no longer supported, use:

sbi(PORTB, PB1); is now PORTB |= _BV(PB1);

cbi(sfr,bit); is now sfr &= ~(_BV(bit));

Setting Fuse bits SUT_CKSEL: FF, DF, C2 - set 8Mhz

Some fun codes, as read by IRremote:

APPLE_PLAY 0x77E1203A APPLE_VOLUME_UP 0x77E1D03A APPLE_VOLUME_DOWN 0x77E1B03A APPLE_NEXT_TRACK 0x77E1E03A APPLE_PREV_TRACK 0x77E1103A APPLE_MENU 0x77E1403A

A2 = 10100010 5D = 01011101 80 = 10000000 7F = 01111111

TOSHIBA_1 0xA25D807F TOSHIBA_2 0xA25D40BF TOSHIBA_3 0xA25DC03F TOSHIBA_4 0xA25D20DF TOSHIBA_5 0xA25DA05F TOSHIBA_6 0xA25D609F TOSHIBA_7 0xA25DE01F TOSHIBA_8 0xA25D10EF TOSHIBA_9 0xA25D906F TOSHIBA_0 0xA25D50AF