This application listens to the environment. if it doesn't get any voice, the silence time countdown starts. When the silence time is completed, the delay time countdown starts. Then the delay time is completed, the application plays selected voice.

1.Dowload Listen Play Application folder in your local computer.Then open folder and double click listenandplay.exe.

2. You can select microphone devices in mic devices via a combo box. Also, you can set silence and delay time with input. The silence time default value is 20 seconds and the delays time default value is 80 seconds.

3. You have to select play voice below. If you don't select play voice, The application doesn't listen to the environment.

4.After following the above steps you can click the start button. The start button listens to the environment. If your silent room has noise like that below, you can ignore this with use "value to ignore" input. This is a calibration before you start really listening.

5.When you complete the calibration, you can click listen button and the application start to listen to the environment. Then it checks silence time and if there is silence during the silence period. The application waits for the delay time to play the selected voice and plays the voice at the end of the time.