arduino-dsmr niet werkt op nieuwe esp8266 lib about arduino-dsmr HOT 6 OPEN

Hello @tthandroid,

Could you provide more details?
I'm using the arduino-dsmr lib from Arduino IDE, and it has been working so far. I guess that it uses the latest arduino-esp8266.

from arduino-dsmr.

Hi Matthijs,,

When I switched to the " https://github.com/esp8266/Arduino" Release 3.1.2 my ESP8266 web server hanged om reading the p1 data.
I don't have this issue in de release 1.0.0..

If you sure that the arduino-dsmr lib will wokrs on de last /esp8266/Arduino last release, than I'm going to search further.

Thanks for your answer!

Regards,
ttandroid.

from arduino-dsmr.

@tthandroid,

When I switched to the " https://github.com/esp8266/Arduino" Release 3.1.2 my ESP8266 web server hanged om reading the p1 data.

There is an Arduino sketch arduino-dsmr/blob/master/examples/read/read.ino. Does it work for you if you try to use it on your board? This will allow you to check if it is actually arduino-dsmr lib and not something else,

from arduino-dsmr.

from arduino-dsmr.

@tthandroid,

The read.ino prints the output into the debug USB-serial port, you need to check what output you get to see if arduino-dsmr works.

from arduino-dsmr.

Hi Matthijs,

Thank you so far for your time!
I have used the ESP01-S with the schematic provided in Tasmota Gitbub builded the prototype for the interface. I'm not able to do the test.
I have to make a new prototype with two serial ports, so that it will provide me the possibility to do the test.

Regards,

from arduino-dsmr.