Comments (5)
matthijskooijman
commented on June 16, 2024
Thanks for your report. It seems the check is indeed too strict, so I just removed the check entirely in git master.
Note that I'm not sure if esphome uses my library directly, I suspect there might be some forks floating around, so it might not start working immediately for you.
Also, could you maybe paste a complete telegraf from your meter here? I would like to collect some examples of different formats for future automated testing :-)
from arduino-dsmr.
Hadramal
commented on June 16, 2024
First of all thank you!
Yes - after making the issue I realised ESPHome is using a fork of your
code, so I will raise an issue with the maintainers of that repo as well...
I could have made a pullrequest myself but I'm not sure I fully understand
the ESPHome build system so I'm not sure how I could test it! I normally
write Java so everything's familiar yet strange.
As the reader I have stops reading data after the header I can't give you
actual live data, but I got the example from this document:
https://www.skekraft.se/wp-content/uploads/2022/10/SKEKRAFT1-1026973-v2-Aidon_HAN_Interface_RJ12.pdf
- it has examples from their meters in the back of the pdf. It's in
Swedish though, but hopefully you won't miss the data examples! The numbers
refer to their different power meters, with 6534 being the far most common
in residential homes. As they were early here in Sweden they also on their
early installs often send the data in a HDLC frame, examples of that are
also in the pdf, but that is being phased out
/Henrik
…On Wed, Feb 8, 2023 at 12:44 PM Matthijs Kooijman ***@***.***> wrote:
Thanks for your report. It seems the check is indeed too strict, so I just
removed the check entirely in git master.
Note that I'm not sure if esphome uses my library directly, I suspect
there might be some forks floating around, so it might not start working
immediately for you.
Also, could you maybe paste a complete telegraf from your meter here? I
would like to collect some examples of different formats for future
automated testing :-)
—
Reply to this email directly, view it on GitHub
<#47 (comment)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/ALRVG3AS5247C4GBEN56LZLWWOBKRANCNFSM6AAAAAAUUJXGI4>
.
You are receiving this because you authored the thread.Message ID:
***@***.***>
from arduino-dsmr.
matthijskooijman
commented on June 16, 2024
Thanks! I've added the spec to the repo for future reference :-)
from arduino-dsmr.
marcus-aa
commented on June 16, 2024
Resolved, but here are some complete telegrams from a Swedish AIdon 6534.
/ADN9 6534
0-0:1.0.0(230302093810W)
1-0:1.8.0(00031157.405kWh)
1-0:2.8.0(00000000.000kWh)
1-0:3.8.0(00000857.557kVArh)
1-0:4.8.0(00000918.106kVArh)
1-0:1.7.0(0004.344kW)
1-0:2.7.0(0000.000kW)
1-0:3.7.0(0000.314kVAr)
1-0:4.7.0(0000.000kVAr)
1-0:21.7.0(0001.083kW)
1-0:22.7.0(0000.000kW)
1-0:41.7.0(0001.855kW)
1-0:42.7.0(0000.000kW)
1-0:61.7.0(0001.408kW)
1-0:62.7.0(0000.000kW)
1-0:23.7.0(0000.351kVAr)
1-0:24.7.0(0000.000kVAr)
1-0:43.7.0(0000.000kVAr)
1-0:44.7.0(0000.545kVAr)
1-0:63.7.0(0000.507kVAr)
1-0:64.7.0(0000.000kVAr)
1-0:32.7.0(231.9V)
1-0:52.7.0(232.6V)
1-0:72.7.0(232.7V)
1-0:31.7.0(004.9A)
1-0:51.7.0(008.3A)
1-0:71.7.0(006.4A)
!7D79
/ADN9 6534
0-0:1.0.0(230302093820W)
1-0:1.8.0(00031157.405kWh)
1-0:2.8.0(00000000.000kWh)
1-0:3.8.0(00000857.557kVArh)
1-0:4.8.0(00000918.106kVArh)
1-0:1.7.0(0004.320kW)
1-0:2.7.0(0000.000kW)
1-0:3.7.0(0000.313kVAr)
1-0:4.7.0(0000.000kVAr)
1-0:21.7.0(0001.063kW)
1-0:22.7.0(0000.000kW)
1-0:41.7.0(0001.853kW)
1-0:42.7.0(0000.000kW)
1-0:61.7.0(0001.411kW)
1-0:62.7.0(0000.000kW)
1-0:23.7.0(0000.329kVAr)
1-0:24.7.0(0000.000kVAr)
1-0:43.7.0(0000.000kVAr)
1-0:44.7.0(0000.545kVAr)
1-0:63.7.0(0000.505kVAr)
1-0:64.7.0(0000.000kVAr)
1-0:32.7.0(231.7V)
1-0:52.7.0(232.4V)
1-0:72.7.0(232.8V)
1-0:31.7.0(004.8A)
1-0:51.7.0(008.3A)
1-0:71.7.0(006.4A)
!8D80
/ADN9 6534
0-0:1.0.0(230302093830W)
1-0:1.8.0(00031157.405kWh)
1-0:2.8.0(00000000.000kWh)
1-0:3.8.0(00000857.557kVArh)
1-0:4.8.0(00000918.106kVArh)
1-0:1.7.0(0005.984kW)
1-0:2.7.0(0000.000kW)
1-0:3.7.0(0000.332kVAr)
1-0:4.7.0(0000.000kVAr)
1-0:21.7.0(0001.057kW)
1-0:22.7.0(0000.000kW)
1-0:41.7.0(0002.688kW)
1-0:42.7.0(0000.000kW)
1-0:61.7.0(0002.233kW)
1-0:62.7.0(0000.000kW)
1-0:23.7.0(0000.356kVAr)
1-0:24.7.0(0000.000kVAr)
1-0:43.7.0(0000.000kVAr)
1-0:44.7.0(0000.960kVAr)
1-0:63.7.0(0000.963kVAr)
1-0:64.7.0(0000.000kVAr)
1-0:32.7.0(231.8V)
1-0:52.7.0(231.8V)
1-0:72.7.0(231.5V)
1-0:31.7.0(004.8A)
1-0:51.7.0(012.3A)
1-0:71.7.0(010.4A)
!806A
/ADN9 6534
0-0:1.0.0(230302093840W)
1-0:1.8.0(00031157.405kWh)
1-0:2.8.0(00000000.000kWh)
1-0:3.8.0(00000857.557kVArh)
1-0:4.8.0(00000918.106kVArh)
1-0:1.7.0(0004.327kW)
1-0:2.7.0(0000.000kW)
1-0:3.7.0(0000.302kVAr)
1-0:4.7.0(0000.000kVAr)
1-0:21.7.0(0001.058kW)
1-0:22.7.0(0000.000kW)
1-0:41.7.0(0001.859kW)
1-0:42.7.0(0000.000kW)
1-0:61.7.0(0001.410kW)
1-0:62.7.0(0000.000kW)
1-0:23.7.0(0000.347kVAr)
1-0:24.7.0(0000.000kVAr)
1-0:43.7.0(0000.000kVAr)
1-0:44.7.0(0000.540kVAr)
1-0:63.7.0(0000.508kVAr)
1-0:64.7.0(0000.000kVAr)
1-0:32.7.0(232.1V)
1-0:52.7.0(232.9V)
1-0:72.7.0(232.9V)
1-0:31.7.0(004.8A)
1-0:51.7.0(008.3A)
1-0:71.7.0(006.4A)
!120C
/ADN9 6534
0-0:1.0.0(230302093850W)
1-0:1.8.0(00031157.405kWh)
1-0:2.8.0(00000000.000kWh)
1-0:3.8.0(00000857.557kVArh)
1-0:4.8.0(00000918.106kVArh)
1-0:1.7.0(0004.319kW)
1-0:2.7.0(0000.000kW)
1-0:3.7.0(0000.309kVAr)
1-0:4.7.0(0000.000kVAr)
1-0:21.7.0(0001.055kW)
1-0:22.7.0(0000.000kW)
1-0:41.7.0(0001.856kW)
1-0:42.7.0(0000.000kW)
1-0:61.7.0(0001.409kW)
1-0:62.7.0(0000.000kW)
1-0:23.7.0(0000.331kVAr)
1-0:24.7.0(0000.000kVAr)
1-0:43.7.0(0000.000kVAr)
1-0:44.7.0(0000.541kVAr)
1-0:63.7.0(0000.507kVAr)
1-0:64.7.0(0000.000kVAr)
1-0:32.7.0(232.1V)
1-0:52.7.0(232.7V)
1-0:72.7.0(232.8V)
1-0:31.7.0(004.7A)
1-0:51.7.0(008.3A)
1-0:71.7.0(006.4A)
!1C56
from arduino-dsmr.
matthijskooijman
commented on June 16, 2024
Thanks!
from arduino-dsmr.
Related Issues (20)
- Need help with lab experiment HOT 5
- How to "get" the int_val() HOT 8
- Lots of 'undefined reference to ' errors HOT 1
- Belgium DSMR does not parse correctly HOT 26
- Bug in parsing logic HOT 2
- Allow customizing mbus id allocations HOT 9
- Doesn't compile on with Arduino 1.8.12?
- Error: a reinterpret_cast is not a constant expression HOT 6
- Problem compiling demo code HOT 3
- reader.available() remains false using Wemos d1 mini HOT 2
- ESP 3.0.0 HOT 7
- Hoog cpu gebruik HOT 2
- Support more OBIS codes so that the parser can be used in more countries HOT 1
- Cannot assign to String with latest Arduino after fix for Error: a reinterpret_cast is not a constant expression HOT 3
- Not able to read timestamps from TimestampedFixedValue HOT 1
- How to access items in a log ? HOT 1
- Update Library on PlatformIO Registry HOT 2
- Timestamp no processed
- T211 DSMR5 meter does not send a unit for unlinked gas meter, causing 'missing unit' errors HOT 1
Recommend Projects
-
React
A declarative, efficient, and flexible JavaScript library for building user interfaces.
-
Vue.js
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
-
Typescript
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
-
TensorFlow
An Open Source Machine Learning Framework for Everyone
-
Django
The Web framework for perfectionists with deadlines.
-
Laravel
A PHP framework for web artisans
-
D3
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
-
Recommend Topics
-
javascript
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
-
web
Some thing interesting about web. New door for the world.
-
server
A server is a program made to process requests and deliver data to clients.
-
Machine learning
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
-
Visualization
Some thing interesting about visualization, use data art
-
Game
Some thing interesting about game, make everyone happy.
Recommend Org
-
Facebook
We are working to build community through open source technology. NB: members must have two-factor auth.
-
Microsoft
Open source projects and samples from Microsoft.
-
Google
Google ❤️ Open Source for everyone.
-
Alibaba
Alibaba Open Source for everyone
-
D3
Data-Driven Documents codes.
-
Tencent
China tencent open source team.
from arduino-dsmr.