matthiaspopp / replicape Goto Github PK

:::python
 _____           __
| ___ \         | (_)
| |_/ /___ _ __ | |_  ___ __ _ _ __   ___
|    // _ \  _ \| | |/ __/ _  |  _ \ / _ \
| |\ \  __/ |_) | | | (_| (_| | |_) |  __/
\_| \_\___| .__/|_|_|\___\__,_| .__/ \___|
         | |                 | |
         |_|                 |_|

Replicape is a 3D printer cape for BeagleBone.

• 5 stepper motors (Trinamic TMC2100) (X, Y, Z, E, H)
• 3 high power MOSFETs (PWM controlled) for 2 extruders and 1 HPB. (12..24V)
• 4 medium power MOSFETs (PWM controlled) for up to 4 fans/LED strips. (12V)
• 3 analog input ports for thermistors. noise-filtered inputs and option for shielding
• 6 inputs for end stops (X, Y, Z).
• 1 bus for Dallas 1W temperature sensor for monitoring the cold end. Up to 10 sensors can be added to the bus.
• 2 servo outputs.
• 1 inductive sensor input.
• Programmable current limits on steppers motor drivers (SMD). No need to manually adjust a pot meter.
• Microstepping individually programmable for each SMD from 1 to 256.
• All steppers are controlled by the Programmable Realtime Unit (PRU) for hard real time operation.
• Compatible with Manga Screen
• Single 12 to 24V PSU, fans are still 12V.
• Compatible with BeagleBone and BeagleBone Black (probably also green and blue).
• Open source hardware and software. (CC BY-SA)
• Software written in Python for maintainability and hackability.

This is the repository for the hardware, the "firmware" (Redeem) has a separate repository

• This repository contains the files needed to reproduce the PCB and continue development.
• The latest revision is B3

It's $99 and you can buy it in the store

• Download the BOM and order the parts from Digi-key
• Send the GERBER files to a PCB manufacturer
• Get a reflow oven
• Populate the board

Talk to Elias

Look at the wiki page: http://wiki.thing-printer.com

The thing-prnter blog is a good place: http://www.thing-printer.com/blog/

• Elias Bakken
• Dirk Eichel
• Stoneshop
• Bent Furevik