mathew-hall / esp8266-dht Goto Github PK

See image. The green line is read out of a Raspberry Pi with the Adafruit driver, the orange and blue lines come from esp8266-dht.

Might need to replace the driver.

Hi
When DSP8266 enters in deep sleep it never come out, I just get this string "��rl�l��|��쒒b�nnlnn�bp��rr��b�n" and it hangs for ever unless y disconnect and reconnect CH_PD (normally connected to 3.3V) or I make a reset.

Here is the output I get from the console.

��rl�l��|��쒒b�nnlnn�bp��rrp�n��lb|��ll�nl�n�p�n�r��n⌌��lnll�n�n�l�nn�p�n�r��n⌎����l�n�nr���l��l`rDHT Setupfor type 0, poll interval of 30000
Httpd init, conn=0x3ffea784
Temperature logging initialising
Got a DS18B20 Reading: 27.0
Ready
mode : sta(18:fe:34:9b:44:19)
add if0
scandone
add 0
aid 4
pm open phy2,type:2 0 0
cnt

connected with ap1-casa, channel 11
dhcp client start...
ip:10.0.1.57,mask:255.255.255.0,gw:10.0.1.1
Logger: couldn't resolve IP address for bmo.local; will broadcast instead
Falling back on 7b00000a for logging
Successfully resolved bmo.local as 7b00000a
Will send to 10.0.0.123
Sending data
Sending heartbeat
DHT: 2b 00 1c 00 [47] CS: 47Temp = 2800 *C, Hum = 4300 %
Got a DS18B20 Reading: 27.0Scheduling power down
Going to deep sleep mode now
deep sleep 45s
��rl�l��|��쒒b�nnlnn�bp��rr��b�n

Recompiling to change the hostname and IP isn't ideal:

As a human,
I want to be able to change the hostname without setting up a toolchain
So I can actually use this software