Comments (10)
blurfl
commented on August 23, 2024
Here's a file that looks OK in MakerCam and InkScape.
Motor_Mount.svg.zip
from mechanics.
mnelson78
commented on August 23, 2024
I opened it in Illustrator and it looks good now.
from mechanics.
BarbourSmith
commented on August 23, 2024
Does PR #8 look like it fixed the issue?
from mechanics.
blurfl
commented on August 23, 2024
MakerCam is happy with them all. InkScape sees the stroke as 90px wide, so renders them with hugely fat lines :(
Should there be one for the sled, as well?
from mechanics.
davidelang
commented on August 23, 2024
when doing CAD work in .svg (inkscape and others), you should always use an
extremely thin line, otherwise you run the risk of the machine trying to cut
both sides of the line.
…On Wed, 15 Mar 2017, Scott Smith wrote:
MakerCam is happy with them all. InkScape sees the stroke as 90px wide, so renders them with hugely fat lines :(
Should there be one for the sled, as well?
from mechanics.
BarbourSmith
commented on August 23, 2024
@DavidLang I agree. The line exporter in sketchup doesn't seem happy exporting a line thinner than .05 in which isn't exactly narrow, but it is better than it was. I think I may need to download inkscape tomorrow to make them truly hair thin.
I've also added a file for the sled.
Do we feel good about merging PR #8 as is for now?
from mechanics.
blurfl
commented on August 23, 2024
Bar,
I’m using the .SVG exporter mentioned to Hannah by RifleSpiral , 20dThu Feb 23 2017 05:14:46 <http://www.maslowcnc.com/forums/#!/no-judgement:sketchup-is-friend-not-foe/theres-a-branch-on-github> and it is willing to do 3.54px (on the Mac I’m using…). No special setup, just using the 1mm defaults for line size.
… On Mar 15, 2017, at 5:34 PM, BarbourSmith ***@***.***> wrote:
@DavidLang <https://github.com/davidlang> I agree. The line exporter in sketchup doesn't seem happy exporting a line thinner than .05 in which isn't exactly narrow, but it is better than it was. I think I may need to download inkscape tomorrow to make them truly hair thin.
I've also added a file for the sled.
Do we feel good about merging PR #8 <#8> as is for now?
—
You are receiving this because you modified the open/close state.
Reply to this email directly, view it on GitHub <#7 (comment)>, or mute the thread <https://github.com/notifications/unsubscribe-auth/ABw_sz4NkCA_Fj_O5qoDVAdBWLxqwwGwks5rmIN7gaJpZM4Meecz>.
from mechanics.
blurfl
commented on August 23, 2024
Bar,
The motor_mount.svg file was not updated with the rest of them, it is still the fat one. Other than that, ready to merge.
… On Mar 15, 2017, at 5:34 PM, BarbourSmith ***@***.***> wrote:
@DavidLang I agree. The line exporter in sketchup doesn't seem happy exporting a line thinner than .05 in which isn't exactly narrow, but it is better than it was. I think I may need to download inkscape tomorrow to make them truly hair thin.
I've also added a file for the sled.
Do we feel good about merging PR #8 as is for now?
—
You are receiving this because you modified the open/close state.
Reply to this email directly, view it on GitHub, or mute the thread.
from mechanics.
davidelang
commented on August 23, 2024
It sounds like the right thing to do, so no reason not to merge the fixes
David Lang
k
from mechanics.
BarbourSmith
commented on August 23, 2024
Thanks for the advice everyone. I'll make everything as close to zero width as I can first thing tomorrow. Yall are also welcome to make pull requests for this kind of thing if it's faster
from mechanics.
Related Issues (20)
- Motor runs every time in same direction HOT 31
- Bent Bolt HOT 3
- Initial plunge off path HOT 3
- Chain pull on setup. HOT 5
- Chain link height HOT 3
- Detailed specs for motors and encoders HOT 3
- All_Parts_Laid_Out.svg AngleBrace1 error HOT 10
- All parts SVG missing parts HOT 5
- Source for Motor mounts HOT 1
- Avoiding tearing down the temporary frame HOT 2
- Correct github/linguist issue
- Why does the shop have a picture of z-axis mounted sideways on a motor mounting plate? HOT 1
- Frame flex HOT 16
- Wiki page claims 0.25in router bit but links to 0.1875in router bit. HOT 7
- SketchUp Motor bracket files not opening in SketchUp HOT 1
- Broken link in wiki ("Z-Axis" page) HOT 2
- Additions to Z-axis Kits
- Flexible frame Concept HOT 6
- Broken link or missing info HOT 6
- Different hardware than assembly guide/ videos HOT 6
Recommend Projects
-
React
A declarative, efficient, and flexible JavaScript library for building user interfaces.
-
Vue.js
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
-
Typescript
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
-
TensorFlow
An Open Source Machine Learning Framework for Everyone
-
Django
The Web framework for perfectionists with deadlines.
-
Laravel
A PHP framework for web artisans
-
D3
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
-
Recommend Topics
-
javascript
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
-
web
Some thing interesting about web. New door for the world.
-
server
A server is a program made to process requests and deliver data to clients.
-
Machine learning
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
-
Visualization
Some thing interesting about visualization, use data art
-
Game
Some thing interesting about game, make everyone happy.
Recommend Org
-
Facebook
We are working to build community through open source technology. NB: members must have two-factor auth.
-
Microsoft
Open source projects and samples from Microsoft.
-
Google
Google ❤️ Open Source for everyone.
-
Alibaba
Alibaba Open Source for everyone
-
D3
Data-Driven Documents codes.
-
Tencent
China tencent open source team.
from mechanics.