Command syntax for flashing Tasmota32 firmware on ESP32 via Esptool (replace COM Port Number!):
esptool.py --chip esp32 --port COM5 --baud 921600 --before default_reset --after hard_reset write_flash -z --flash_mode dout --flash_freq 40m --flash_size detect 0x1000 bootloader_dout_40m.bin 0x8000 partitions.bin 0xe000 boot_app0.bin 0x10000 tasmota32.bin

• Scripting included instead of rules
• Tasmota Zigbee gateway build
• Tasmota Rules with all the extras enabled
• Tasmota Battery build for battery powered tuya sensors
• Tasmota Mega at the bleeding edge - Almost every sensor included
• Tasmota Platinum nearly ALL enabled IT.IS.HUGE!
  Only serial flash is possible, there's no OTA possible!