This repository contains a pure Rust implementation for the BME680 environmental sensor. The library can be used to read the gas, pressure, humidity and temperature sensors via I²C.

The library uses the embedded-hal library to abstract reading and writing via I²C. In the examples you can find a demo how to use the library in Linux using the linux-embedded-hal implementation.

drogue-bme680

Determine the I2C device path

pi@raspberrypi:~ $ i2cdetect -y -l
i2c-1    i2c       bcm2835 I2C adapter             I2C adapter

Determine I2C-Address of sensor, 0x76 is the primary address, 0x77 is the secondary address. If in doubt determine the address via the following command:

pi@raspberrypi:~ $ i2cdetect -y 1
     0  1  2  3  4  5  6  7  8  9  a  b  c  d  e  f
00:          -- -- -- -- -- -- -- -- -- -- -- -- --
10: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
20: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
30: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
40: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
50: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
60: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
70: -- -- -- -- -- -- 76

The examples folder contains an example for a simple influx database client inserting collected values. Below you may find examples of Chronograf graphs of an indoor measurement over a period of 30 days.