Create a virtual environment
In Windows (Use only command prompt not powershell to execute following commands)
If python is installed in your system, then pip comes in handy.
So simple steps are:
1) Install virtualenv using
> pip install virtualenv
2)Now in which ever directory you are, this line below will create a virtualenv there
> virtualenv myenv
And here also you can name it anything.
3) Now if you are same directory then type,
> myenv\Scripts\activate
You can explicitly specify your path too.
In Linux
If pip is not in your system
1)$ sudo apt-get install python-pip
Then install virtualenv
2)$ pip install virtualenv
Now check your installation
3)$ virtualenv --version
Create a virtual environment now,
4)$ virtualenv virtualenv_name
After this command, a folder named virtualenv_name will be created. You can name anything to it. If you want to create a virtualenv for specific python version, type
5)$ virtualenv -p /usr/bin/python3 virtualenv_name
6)$ source virtualenv_name/bin/activate
Now you are in a Python virtual environment
Install all required packges using command
>pip install -r requirements.txt
run the the file using command
>python audio_video_tansfer.py <ip_address_of_other_system>
if you want to know the Ip address of the system use the following command
>ipconfig
you will find your ip address here IPv4 Address. . . . . . . . . . . : 192.168.0.98