The Adaptive Case for PS4 Controller is an inexpensive and non-destructive controller modification designed to make the stock PS4 controller more accessible. This device aims to assist those with limited hand dexterity by enlarging and spreading out the buttons on the PS4 controller. This device can be mounted to a surface so that both hands can freely operate the controls.
This is an open-source assistive technology, so anyone is free to build it. All of the files and instructions required to build the Adaptive Case for PS4 Controller are contained within this repository. Refer to the Maker Checklist below.
If you would like to obtain an Adaptive Case for PS4 Controller , you may submit a build request through the MMC Library Page. The requestor is responsible for the cost of materials and any shipping.
If you have the skills and equipment to build this device, and would like to donate your time to create the switch for someone who needs it, visit the MMC Maker Wanted section.
The Makers Checklist contains a list of tasks to complete to build the device.
All of the files and individual print files can be in the /Build_Files/3D_Printing_Files folder.
Reference the Assembly Guide for the tools and steps required to build each portion.
Document | Version | Link |
---|---|---|
Design Rationale | 1.0 | Adaptive_Case_for_Ps4_Controller_Design_Rationale |
Maker Checklist | 1.0 | Adaptive_Case_for_Ps4_Controller_Maker_Checklist |
Bill of Materials | 1.0 | Adaptive_Case_for_Ps4_Controller_Bill_of_Materials |
3D Printing Guide | 1.0 | Adaptive_Case_for_Ps4_Controller_3D_Printing_Guide |
Assembly Guide | 1.0 | Adaptive_Case_for_Ps4_Controller_Assembly_Guide |
User Guide | 1.0 | Adaptive_Case_for_Ps4_Controller_User_Guide |
Changelog | 1.0 | Adaptive_Case_for_Ps4_Controller_Changelog |
Design: Cisco posted on Printables
Documentation by Neil Squire / Makers Making Change.
Everything needed or used to design, make, test, or prepare theAdaptive_Case_for_Ps4_Controller is licensed under the CERN 2.0 Permissive license https://ohwr.org/project/cernohl/wikis/Documents/CERN-OHL-version-2 (CERN-OHL-P) .
Accompanying material such as instruction manuals, videos, and other copyrightable works that are useful but not necessary to design, make, test, or prepare the Adaptive_Case_for_Ps4_Controller are published under a Creative Commons Attribution-ShareAlike 4.0 license https://creativecommons.org/licenses/by-sa/4.0/ (CC BY-SA 4.0).
Makers Making Change is an initiative of Neil Squire, a Canadian non-profit that empowers people with disabilities.
We are committed to creating a network of volunteer makers who support people with disabilities in their communities through 3D printing assistive devices. Check out our library of free, open-source assistive technologies with parts and build instructions.
- Website: www.MakersMakingChange.com
- GitHub: https://github.com/makersmakingchange
- Twitter: @makermakechange
- Instagram: @makersmakingchange
For technical questions, to get involved, or share your experience we encourage you to visit the MMC Website, MMC Forum, or contact [email protected]