lukier / linux-hi3518 Goto Github PK

Uncompressing Linux... done, booting the kernel.
[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 4.4.0-rc4 (csolg@hi3518) (gcc version 6.1.0 (Buildroot 2016.05-g8d2785c-dirty) ) #2 Tue Aug 2 00:58:55 VLAT 2016
[    0.000000] CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=0005317f
[    0.000000] CPU: VIVT data cache, VIVT instruction cache
[    0.000000] Machine model: Hisilicon Hi3518 Camera
[    0.000000] Memory policy: Data cache writeback
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 10160
[    0.000000] Kernel command line: mem=40M console=ttyAMA0,115200n8 mtdparts=hi_sfc:256k(uboot)ro,256k(uboot-env),3m(kernel),-(rootfs) root=/dev/mtdblock3 hieth.mdioifu=0 hieth.mdioifd=0 hieth.phy2
[    0.000000] PID hash table entries: 256 (order: -2, 1024 bytes)
[    0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
[    0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Memory: 33200K/40960K available (5140K kernel code, 204K rwdata, 1488K rodata, 160K init, 261K bss, 7760K reserved, 0K cma-reserved, 0K highmem)
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
[    0.000000]     vmalloc : 0xc3000000 - 0xff800000   ( 968 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xc2800000   (  40 MB)
[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
[    0.000000]       .text : 0xc0008000 - 0xc06816e4   (6630 kB)
[    0.000000]       .init : 0xc0682000 - 0xc06aa000   ( 160 kB)
[    0.000000]       .data : 0xc06aa000 - 0xc06dd068   ( 205 kB)
[    0.000000]        .bss : 0xc06dd068 - 0xc071e628   ( 262 kB)
[    0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] NR_IRQS:16 nr_irqs:32 32
[    0.000000] VIC @c3000000: id 0x00641190, vendor 0x41
[    0.000000] LUKIER-ClkHi3518 Initializing hi3518-clock node <NULL> clock /clocks/clock@20030000
[    0.000000] clocksource: arm,sp804: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns
[    0.000026] sched_clock: 32 bits at 100MHz, resolution 10ns, wraps every 21474836475ns
[    0.000966] Console: colour dummy device 80x30
[    0.001036] Calibrating delay loop... 218.72 BogoMIPS (lpj=1093632)
[    0.069962] pid_max: default: 32768 minimum: 301
[    0.070239] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.070293] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.072272] CPU: Testing write buffer coherency: ok
[    0.073379] Setting up static identity map for 0x80008400 - 0x80008458
[    0.081132] devtmpfs: initialized
[    0.094585] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.095066] pinctrl core: initialized pinctrl subsystem
[    0.096590] NET: Registered protocol family 16
[    0.099262] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.129052] Serial: AMBA PL011 UART driver
[    0.129828] 20080000.uart: ttyAMA0 at MMIO 0x20080000 (irq = 37, base_baud = 0) is a PL011 rev2
[    0.414747] console [ttyAMA0] enabled
[    0.419645] uart-pl011 20090000.uart: could not find pctldev for node /soc/pinmux@200F0000/pinmux_uart1_pins, deferring probe
[    0.431182] uart-pl011 200a0000.uart: could not find pctldev for node /soc/pinmux@200F0000/pinmux_uart2_pins, deferring probe
[    0.468788] pl08xdmac 100d0000.dma-controller: initialized 8 virtual memcpy channels
[    0.476766] pl08xdmac 100d0000.dma-controller: initialized 12 virtual slave channels
[    0.492801] pl08xdmac 100d0000.dma-controller: DMA: PL080 rev0 at 0x100d0000 irq 46
[    0.501938] SCSI subsystem initialized
[    0.505985] ssp-pl022 200c0000.spi0: could not find pctldev for node /soc/pinmux@200F0000/pinmux_spi0_pins, deferring probe
[    0.517349] ssp-pl022 200e0000.spi1: could not find pctldev for node /soc/pinmux@200F0000/pinmux_spi1_pins, deferring probe
[    0.530184] usbcore: registered new interface driver usbfs
[    0.535999] usbcore: registered new interface driver hub
[    0.541648] usbcore: registered new device driver usb
[    0.547377] Linux video capture interface: v2.00
[    0.555881] clocksource: Switched to clocksource arm,sp804
[    0.607942] NET: Registered protocol family 2
[    0.614828] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
[    0.622059] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[    0.628612] TCP: Hash tables configured (established 1024 bind 1024)
[    0.635296] UDP hash table entries: 256 (order: 0, 4096 bytes)
[    0.641364] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[    0.648501] NET: Registered protocol family 1
[    0.654156] RPC: Registered named UNIX socket transport module.
[    0.660233] RPC: Registered udp transport module.
[    0.664959] RPC: Registered tcp transport module.
[    0.669752] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.679847] futex hash table entries: 256 (order: -1, 3072 bytes)
[    0.729339] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.740217] NFS: Registering the id_resolver key type
[    0.745396] Key type id_resolver registered
[    0.749730] Key type id_legacy registered
[    0.753857] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[    0.762775] fuse init (API version 7.23)
[    0.784244] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    0.791880] io scheduler noop registered
[    0.795956] io scheduler deadline registered
[    0.800403] io scheduler cfq registered (default)
[    0.806365] pinctrl-single 200f0000.pinmux: 95 pins at pa c3016000 size 380
[    0.814712] pl061_gpio 20140000.gpio: PL061 GPIO chip @0x20140000 registered
[    0.822891] pl061_gpio 20150000.gpio: PL061 GPIO chip @0x20150000 registered
[    0.831063] pl061_gpio 20160000.gpio: PL061 GPIO chip @0x20160000 registered
[    0.839225] pl061_gpio 20170000.gpio: PL061 GPIO chip @0x20170000 registered
[    0.847389] pl061_gpio 20180000.gpio: PL061 GPIO chip @0x20180000 registered
[    0.855544] pl061_gpio 20190000.gpio: PL061 GPIO chip @0x20190000 registered
[    0.863719] pl061_gpio 201a0000.gpio: PL061 GPIO chip @0x201a0000 registered
[    0.871861] pl061_gpio 201b0000.gpio: PL061 GPIO chip @0x201b0000 registered
[    0.880076] pl061_gpio 201c0000.gpio: PL061 GPIO chip @0x201c0000 registered
[    0.888222] pl061_gpio 201d0000.gpio: PL061 GPIO chip @0x201d0000 registered
[    0.896384] pl061_gpio 201e0000.gpio: PL061 GPIO chip @0x201e0000 registered
[    0.904507] pl061_gpio 201f0000.gpio: PL061 GPIO chip @0x201f0000 registered
[    1.203747] Serial: AMBA driver
[    1.262325] brd: module loaded
[    1.291638] loop: module loaded
[    1.302752] nbd: registered device at major 43
[    1.355736] libphy: Fixed MDIO Bus: probed
[    1.366999] hieth 10090000.ether: using random MAC address 2e:41:ca:27:d5:0d
[    1.376459] hieth 10090000.ether: eth0: at c34e0000, IRQ 44 MAC: 2e:41:ca:27:d5:0d
[    1.385078] libphy: hieth_mii_bus: probed
[    1.428509] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.435152] ehci-platform: EHCI generic platform driver
[    1.440988] ehci-platform 100b0000.ehci: EHCI Host Controller
[    1.447012] ehci-platform 100b0000.ehci: new USB bus registered, assigned bus number 1
[    1.458248] ehci-platform 100b0000.ehci: can't setup: -110
[    1.463799] ehci-platform 100b0000.ehci: USB bus 1 deregistered
[    1.469947] ehci-platform: probe of 100b0000.ehci failed with error -110
[    1.477115] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.483402] ohci-platform: OHCI generic platform driver
[    1.489205] ohci-platform 100a0000.ohci: Generic Platform OHCI controller
[    1.496270] ohci-platform 100a0000.ohci: new USB bus registered, assigned bus number 1
[    1.504575] ohci-platform 100a0000.ohci: irq 48, io mem 0x100a0000
[    1.565948] ohci-platform 100a0000.ohci: init err (00000000 0000)
[    1.572079] ohci-platform 100a0000.ohci: can't start
[    1.577342] ohci-platform 100a0000.ohci: startup error -75
[    1.582897] ohci-platform 100a0000.ohci: USB bus 1 deregistered
[    1.589092] ohci-platform: probe of 100a0000.ohci failed with error -75
[    1.597536] mousedev: PS/2 mouse device common for all mice
[    1.604702] i2c /dev entries driver
[    1.615851] sp805-wdt 20040000.watchdog: registration successful
[    1.622696] sdhci: Secure Digital Host Controller Interface driver
[    1.629008] sdhci: Copyright(c) Pierre Ossman
[    1.633430] Synopsys Designware Multimedia Card Interface Driver
[    1.640116] dw_mmc 10020000.sdio: num-slots property not found, assuming 1 slot is available
[    1.648727] dw_mmc 10020000.sdio: fifo-depth property not found, using value of FIFOTH register as default
[    1.658564] dw_mmc 10020000.sdio: IDMAC supports 32-bit address mode.
[    1.665168] dw_mmc 10020000.sdio: Using internal DMA controller.
[    1.671424] dw_mmc 10020000.sdio: Version ID is 210a
[    1.676612] dw_mmc 10020000.sdio: DW MMC controller at irq 50,32 bit host data width,256 deep fifo
[    1.685741] dw_mmc 10020000.sdio: No vmmc regulator found
[    1.691264] dw_mmc 10020000.sdio: No vqmmc regulator found
[    1.736063] dw_mmc 10020000.sdio: 1 slots initialized
[    1.741441] sdhci-pltfm: SDHCI platform and OF driver helper
[    1.748538] usbcore: registered new interface driver usbhid
[    1.754140] usbhid: USB HID core driver
[    1.758883] ipip: IPv4 over IPv4 tunneling driver
[    1.769560] NET: Registered protocol family 10
[    1.779441] sit: IPv6 over IPv4 tunneling driver
[    1.786779] NET: Registered protocol family 17
[    1.791400] NET: Registered protocol family 15
[    1.796315] 8021q: 802.1Q VLAN Support v1.8
[    1.800770] Key type dns_resolver registered
[    1.813601] 20090000.uart: ttyAMA1 at MMIO 0x20090000 (irq = 37, base_baud = 0) is a PL011 rev2
[    1.824184] 200a0000.uart: ttyAMA2 at MMIO 0x200a0000 (irq = 57, base_baud = 0) is a PL011 rev2
[    1.834460] ssp-pl022 200c0000.spi0: ARM PL022 driver, device ID: 0x00041022
[    1.841842] ssp-pl022 200c0000.spi0: mapped registers from 0x200c0000 to c3600000
[    1.851141] ssp-pl022 200e0000.spi1: ARM PL022 driver, device ID: 0x00041022
[    1.858483] ssp-pl022 200e0000.spi1: mapped registers from 0x200e0000 to c3620000
[    1.868518] hctosys: unable to open rtc device (rtc0)
[    1.875769] uart-pl011 20080000.uart: no DMA platform data
[    1.882745] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0)
[    1.891032] CPU: 0 PID: 1 Comm: swapper Not tainted 4.4.0-rc4 #2
[    1.897044] Hardware name: Hisilicon Hi3516/Hi3518 (Flattened Device Tree)
[    1.904003] [<c000f1e0>] (unwind_backtrace) from [<c000d16c>] (show_stack+0x10/0x14)
[    1.911795] [<c000d16c>] (show_stack) from [<c0062588>] (panic+0x80/0x1e0)
[    1.918719] [<c0062588>] (panic) from [<c0683190>] (mount_block_root+0x178/0x22c)
[    1.926245] [<c0683190>] (mount_block_root) from [<c0683434>] (mount_root+0xf4/0x120)
[    1.934112] [<c0683434>] (mount_root) from [<c06835b0>] (prepare_namespace+0x150/0x1b0)
[    1.942152] [<c06835b0>] (prepare_namespace) from [<c0682db0>] (kernel_init_freeable+0x180/0x1cc)
[    1.951072] [<c0682db0>] (kernel_init_freeable) from [<c04e6b00>] (kernel_init+0x8/0xe8)
[    1.959202] [<c04e6b00>] (kernel_init) from [<c000a450>] (ret_from_fork+0x14/0x24)
[    1.966791] ---[ end Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0)
[   82.695956] random: nonblocking pool is initialized