luarvique / ppa Goto Github PK

I had to reinstall Openwebrx+ now ISM stopped decoding. I did a full uninstall reinstall of openwebRX pluss. Now it will not decode ISM. Why I had to reinstall was after upgrading and updating the system OS openwebrx stopped working So i removed and reinstalled I really hat to have to redo the whole system. Any tips on getting this working without? all dependencies are installed I don;t get it.

Hello Folks,
playing with Openwebrxplus these Days.
Is it possible to receive Pocsag Messages in 512Baud? The original Soft supports only 1200Bd.

73 Holger

multimon-ng supports a charset parameter (which can be one of the following options: US,FR,DE,SE,SI)
Would be cool if this could be a dropdown in the "Misc" section where the other pager related setting is.

I am aware that this is rather a feature request for https://github.com/luarvique/openwebrx - but since the issues there are not enabled I thought I'd give it a shot over here.

Dear Sir ,

I would like to know if I am doing something wrong , I want to also have DMR decoder on my OW+
Because I am using an ubuntu VM and I can't use docker or RPI ( due to material shortage )
I would like to know what I need to do to able DMR decoding function on my OWRX+ server.

Thank you in advance

Hi,
Debian 11.6 amd64 And Openwebrx+
I can`t install codecserver - error with dependencies.
Tom SQ4BJA

">" instead of -o
overwrite existing file
so, no error

In order to add this repository to your Ubuntu system, do the following, as root:

wget -O - https://luarvique.github.io/ppa/openwebrx-plus.gpg | gpg --dearmor > /etc/apt/trusted.gpg.d/openwebrx-plus.gpg
echo "deb [signed-by=/etc/apt/trusted.gpg.d/openwebrx-plus.gpg] https://luarvique.github.io/ppa/ubuntu ./" > /etc/apt/sources.list.d/openwebrx-plus.list
apt update

In order to add this repository to your Ubuntu system, do the following, as root:

wget -O - https://luarvique.github.io/ppa/openwebrx-plus.gpg | gpg --dearmor -o /etc/apt/trusted.gpg.d/openwebrx-plus.gpg
echo "deb [signed-by=/etc/apt/trusted.gpg.d/openwebrx-plus.gpg] https://luarvique.github.io/ppa/ubuntu ./" > /etc/apt/sources.list.d/openwebrx-plus.list
apt update

motherlanguage german

Ich habe eine Fehlermeldung bekommen, bzw blieb hängen... irgendwo in der Ausgabe versteckt habe ich dann etwas wie ...überschreiben? gelesen... und habe mich zur gpg -o option vorgearbeitet, mit der umleitung in eine Datei ">" kam kein Fehler...
Ist das eine mögliche Lösung?

Hello
I want to slowly activate the AGC profile for SSB. In which file do I have to change this? Perhaps this can still be implemented in the receiver menu?

Hi!
After upgrading OpenWebRX+ to the latest version (1.2.30), SAM has disappeared from the list. SAM was available in a previous version (1.2.29). Is this expected behavior?

I'm running OpenWebRX+ in Ubuntu 22.04 (Jammy Jellyfish), amd64, minimized setup.

Hi,
after upgrade soapysdr-module-sdrplay3 started requirin SDRplay API 3.14. I do not want to upgrade the API to 3.14.
Please advice how to regress back to a version of soapysdr-module-sdrplay3 that is happy with SDRPlay API 3.12.

seguenti pacchetti hanno dipendenze non soddisfatte:
python3-csdr : Dipende: python3 (< 3.11) ma la versione 3.11.2-1 sta per essere installata
E: Impossibile correggere i problemi, ci sono pacchetti danneggiati bloccati.

ppa is ok. How can i resolve?

Hi there, Just did the update to v1.2.38 and have found that the noise reduction no longer works and also the toggle spectrum display has stopped working. Is there anyway to restore this funtion please? Really enjoying this wee project. Cheers Kev

Hi,

is there a way to install one of the Old versions of Openwebrx+ on ubuntu?

i need to install version 1.2.39

thank you

Hi,
I`m using Nginx as Reverse proxy to Openwebrx+.
I found some errors in nginx logs (404 - file not found):

GET /settings/static/gfx/svg-defs.svg HTTP/1.1" 404
GET /settings/sdr/rtl_sdr_h/profile/static/gfx/svg-defs.svg HTTP/1.1" 404
GET /favicon.ico HTTP/1.1" 404

What is wrong?

Could you please add a row with customisable Bands like its in KiwiSDR?

Use case:

i'am listening a bandwith from 155Mhz to 157Mhz.

I have already ploted some bookmarks on this bandwith.

i would like a feature that auto jump/switch from a bookmark to another (in the same profil) after a silence (based on autoSquelch setting), at signal incoming.

ex : i am listening to Bookmark1 (155,450Mhz). After 20sec of silence, auto switch is actived. When a signal incoming to Bookmark5 (156,500Mhz), tuner auto jump to this channel for listening. After another 20sec of silence, auto switch is actived again.

Hi,
Installation of openwebrx fail. Python version is 3.11.
Have you some ideas to bypass this issue
Regards - F1FHK

Thank you for developing openwegrx+. Would it be something to implement dab and dab+ in openwebrx. Thank you.

Feature description:
Add options to allow to report AIS (APRS like) to https://www.vesselfinder.com/ API (udp / @ip / port)

Target audience
Everyone using openwebrx to listen AIS traffic and want to share with vesselfinder

thank you :)

I just updated the Soapy SDR module with

apt install soapysdr-module-sdrplay3

on my remote RSPdx on Raspberry PI4. Seems like this update should be done with the RSP disconnected from the Raspberry, as now my RSP did not start up. Even after three reboots the RSP did unfortunately not start. Is there a way to get it up without having to actually physically disconnect the RSP from the Raspi? As the RX is in a remote location I would rather not have to make the trip there.

Would be cool to have an offline map to use the Raspberry in the mountains without internet.
We could have a live AIS and APRS overview map. By providing a map tile server endpoint in the settings, for example in the XYZ format, hosted with https://github.com/maptiler/tileserver-gl.

Hi,

Can it be possible to integrate existing software on github to OWRX in order to decode radio sondes?

https://github.com/topics/radiosonde

Rui Delgado

Hello!
Back in the early days, OpenWebRX had a configuration option for users with upconverters.
It was located in config_webrx.py file as "shown_center_frequency=" and setting this value to the desired value caused the UI to show the set value instead of upconverter frequency + desired frequency.

In my case, the upconverter is the Spyverter with 120MHz upconversion, so if I want to tune to 4.625MHz to hear the good old russian buzzer UVB76, I need to use a frequency of 124.625MHz instead. As the frequency is different, the bookmarks set for lower frequencies don't show.

This option is shown in the old configuration file behind this link:
https://github.com/ha7ilm/openwebrx/blob/76350936794dc21da313b842b95fab17eda5372f/config_webrx.py#L111

If this is not already implemented, I would love to see this as an option for profiles.
If this probability already exists, can you point me to the right direction?

I try to follow your description of installing Openwebrx+ on my Debian 12 server but after running the apt install openwebrx command I get the error:

The following packages have unmet dependencies:
python3-csdr : Depends: python3 (< 3.10) but 3.11.2-1+b1 is to be installed
soapy-connector : Depends: libsoapysdr0.7 (>= 0.7.2) but it is not installable
E: Unable to correct problems, you have held broken packages.

Is it possible to recompile your version of openwebrx+ so it can also run on the latest version of Debian?

Hi, in which code line do the POCSAG messages receive their 'Random' color? I would prefer if all messages had the same color background. I searched for over an hour but didn't find it. It would be nice if I could get a little help. 👯‍♂️

Hola,
he probado a instalarlo en un contenedor de debian y da error al instalar, el paquete esta comprimido con zst y el dpkg de debian no lo soporta. La version debian de JaKob si que la instala bien.
Por otro lado en un contenedor con ubuntu si lo instala correctamente y funciona con rtl-sdr.

Un saludo,
Juan.

经过查看日志后来发现https://github.com/luarvique/owrx_connector中的组件缺少
(optional) If you want to work with devices supported by SoapySDR, you will need to install the corresponding header files (on Debian: apt-get install libsoapysdr-dev)

安装后libsoapysdr-dev后正常，希望可以帮到其他人。

Hi,

Its a two in one feature request. The possibility to block a given IP adddress from connecting to OWRX+ and the possibility to end current connected sessions on OWRX+, not all at once but specific ones, in the settings page.

Even if not possible I take to opportunity say thank you for all the effort you guys put into OWRX.

Rui Delgado