liyistc / cleansync Goto Github PK
View Code? Open in Web Editor NEWAutomatically exported from code.google.com/p/cleansync
Automatically exported from code.google.com/p/cleansync
Put the local path to removable media, and change the drive of the
removable media. Only removable path will be changed, no path not found
(which should be thrown) exception shown to user.
Original issue reported on code.google.com by shiokamania
on 30 Mar 2010 at 8:38
consider allowing '.' in job names. It is not allowed in 2.0.
Original issue reported on code.google.com by [email protected]
on 6 May 2010 at 10:55
The user can actually choose both versions to keep but the system only keep
one of them.
Original issue reported on code.google.com by shiokamania
on 30 Mar 2010 at 7:37
Incorrect message, due to old error message persist as the job name is
already saved.
Original issue reported on code.google.com by shiokamania
on 30 Mar 2010 at 8:40
[Critical] As per issue summary
Original issue reported on code.google.com by shiokamania
on 30 Mar 2010 at 8:47
Essentially, the program also support the one way sync, it always update
the intermediate buffer on the stick memory with the folder on the local
machine.
Original issue reported on code.google.com by [email protected]
on 10 May 2010 at 9:30
After I have created a task, the files are copied over, as well as some
extra information, but within CleanSync, the Removable Path is not defined
(when I click on the job on the left, only "JobName" and "Local Path" is
defined. The "Remote Path" and "Removable Path" fields say "Not Fully Setup".
Original issue reported on code.google.com by shiokamania
on 30 Mar 2010 at 7:50
Need to click on the "Analyze" before start sync. The start sync button
beside analyze is not functioning
Original issue reported on code.google.com by shiokamania
on 30 Mar 2010 at 7:51
Invalid job names are yet to be handled. E.g, duplicate job names, USB
plugging in with duplicate job names, etc.
Original issue reported on code.google.com by shiokamania
on 27 Mar 2010 at 5:32
Actually, it does not support rename.
Original issue reported on code.google.com by [email protected]
on 10 May 2010 at 9:30
Unable to detect file/folder conflicts of the same name.
Original issue reported on code.google.com by shiokamania
on 30 Mar 2010 at 7:47
This should delete as the user may want to cancel the whole thing or at
least give a message box.
Original issue reported on code.google.com by shiokamania
on 30 Mar 2010 at 8:43
Users are currently allowed to set the USB path on the computer Hard Disk
currently. There is no checking to prevent users from doing so. It will
forever be an incomplete job and the USB meta-data not be detected next
time the program starts up, causing a dead job.
Original issue reported on code.google.com by shiokamania
on 15 Mar 2010 at 8:35
Unable to save destination path for Task.
Original issue reported on code.google.com by shiokamania
on 30 Mar 2010 at 7:48
I do the following actions: (1) Edit file.txt; (2) Sync the folder; (3)
Edit file.txt; (4) Sync the folder; (5) Edit the file.txt again; (6) Sync
the folder; (7) The system suddenly tells me that I cannot access
Backupm1.temp on my thumb drive.
Original issue reported on code.google.com by shiokamania
on 30 Mar 2010 at 7:40
When two files are deleted and one file is updated, the system cannot sync
them. In fact, it will show an exception message box. If you insists to
sync again, then the system will be not responding and crashed.
Original issue reported on code.google.com by shiokamania
on 30 Mar 2010 at 7:41
What steps will reproduce the problem?
1. Unauthorized access exception during synchronization happens for
folders. At different times, it occurs at different areads. Happens usually
during accepting job synchronization
Original issue reported on code.google.com by shiokamania
on 27 Mar 2010 at 5:36
No checking of folder dependency (it syncs with sub-folder, even if both
are in portable media)
Original issue reported on code.google.com by shiokamania
on 30 Mar 2010 at 8:34
Program shows message 'Not fully setup' after sync. Cannot perform sync
subsequently. This applies to various Windows versions and local/removable
drives.
Original issue reported on code.google.com by shiokamania
on 30 Mar 2010 at 7:36
Add two empty folders X and Y in uppper case in folder A, after the sync,
two folders x and y in lower case are added to folder B.
Original issue reported on code.google.com by [email protected]
on 10 May 2010 at 9:31
The software hangs and shows an error when a large folder on a computer is
"first synced" with the folder on ED. I guess the background worker or a
separate thread is not used for synchronization.
Original issue reported on code.google.com by shiokamania
on 30 Mar 2010 at 7:49
[Non-critical] The first time I run CleanSync, 4 buttons appeared at the
bottom of the UI, but only 1 of them is clickable. Perhaps the other 3
buttons can be disabled to indicate to the user that they are not in use.
Otherwise when I click any of the 3 buttons, I do not get any response
either. Analyse button does not seem to work.
Original issue reported on code.google.com by shiokamania
on 30 Mar 2010 at 8:45
Suggestion: Allow users to rename a job after creating it. Currently, the
only option is to delete the job and create it again with a different name.
Original issue reported on code.google.com by [email protected]
on 6 May 2010 at 11:31
A folder called _cs_job_data is created on the folder containing the
program executable file and the root drive of the source/destination folder.
Original issue reported on code.google.com by shiokamania
on 30 Mar 2010 at 7:31
At the end of the session, the user may have a lot of jobs in the main
window. If the user have hundreds of jobs created, it will be tedious if
the user has to delete the job one by one. A checkbox to let the user to
indicate which job he/she wants to delete
Original issue reported on code.google.com by shiokamania
on 30 Mar 2010 at 7:56
When there is an existing task "T1", if user create a new task "T1", the
program does not warn user for task name conflicts, and the program will
crash if user sync the new "T1" with different path input as old "T1".
Original issue reported on code.google.com by shiokamania
on 30 Mar 2010 at 7:42
No handling of such a problem
Original issue reported on code.google.com by shiokamania
on 30 Mar 2010 at 7:55
Buttons such as analysis and sync are not disabled when no job is selected.
Original issue reported on code.google.com by shiokamania
on 30 Mar 2010 at 7:37
When pressing the browse folder for the second time, and cancel, the
original path is removed.
Original issue reported on code.google.com by shiokamania
on 30 Mar 2010 at 8:41
During job creation, if there is only one external drive detected, select
it by default rather than requiring the user to click it.
Original issue reported on code.google.com by [email protected]
on 6 May 2010 at 11:30
Nothing happens when start sync button is clicked. Apparently, sync can
only be done when user clicks on analyze button then click start sync
button at the analysis window.
Original issue reported on code.google.com by shiokamania
on 30 Mar 2010 at 7:33
A declarative, efficient, and flexible JavaScript library for building user interfaces.
๐ Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
An Open Source Machine Learning Framework for Everyone
The Web framework for perfectionists with deadlines.
A PHP framework for web artisans
Bring data to life with SVG, Canvas and HTML. ๐๐๐
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
Some thing interesting about web. New door for the world.
A server is a program made to process requests and deliver data to clients.
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
Some thing interesting about visualization, use data art
Some thing interesting about game, make everyone happy.
We are working to build community through open source technology. NB: members must have two-factor auth.
Open source projects and samples from Microsoft.
Google โค๏ธ Open Source for everyone.
Alibaba Open Source for everyone
Data-Driven Documents codes.
China tencent open source team.