MAX30102 Pulse Oximetry Sensor code for Raspberry Pi

The code originally comes from: https://github.com/vrano714/max30102-tutorial-raspberrypi but with some modifications so that it doesn't require the interrupt pin and instead polls by checking the read and write FIFO pointers. I've also added a top level of code that encapsulates everything into a thread.

The original code is a Python port based on Maxim's reference design written to run on an Arduino UNO: https://github.com/MaximIntegratedRefDesTeam/RD117_ARDUINO/

A couple non-standard Python libraries are required: smbus and numpy. I recommend installing the numpy library with apt as opposed to pip since pip takes a really long time. sudo apt install python-numpy

Run python main.py, data will be printed in standard output.

The full usage:

$ python main.py -h
usage: main.py [-h] [-r] [-t TIME]

Read and print data from MAX30102

optional arguments:
  -h, --help            show this help message and exit
  -r, --raw             print raw data instead of calculation result
  -t TIME, --time TIME  duration in seconds to read from sensor, default 30

To use the code, instantiate the HeartRateMonitor class found in heartrate_monitor.py. The thread is used by running start_sensor and stop_sensor. While the thread is running you can read bpm to get the active beats per minute. Note that a few seconds are required to get a reliable BPM value and the sensor is very sensitive to movement so a steady finger is required!