leonyuhanov / ks0108_rpi_driver Goto Github PK

Hi,

I bought the AZDelivery LCD Display, a similar display to the one that you are using to develop this project, and I'm trying to make it work with a RaspPi4. It's also based on the KS0108 display, but this one has 2 chips instead of 3.

I'm having problems understanding the PINOUT that you reference. From the README file:

• SPI CS pin = GPIO-7
• SPI MOSI Pin = GPIO-10
• SPI CLK Pin = GPIO-11
• PIN_DI = GPIO-14
• PIN_RW = GPIO-15
• PIN_E = GPIO-18
• PIN_CS1 = GPIO-23
• PIN_CS2 = GPIO-24
• PIN_RES = GPIO-1

But if I take a look at KS0108X3_RPI_Driver.h I can see:

• uint8_t PIN_DI;
• uint8_t PIN_RW;
• uint8_t PIN_E;
• uint8_t PIN_CS1;
• uint8_t PIN_CS2;
• uint8_t PIN_RES;
• uint8_t SPI_CS_PIN=7;

So, the first question that comes to my mind is, is this project functional? If so, why are the SPI MOSI Pin and SPI CLK Pin missing from the .h file? Aren't they needed?