As soon as I run dist-upgrade my system becomes unbootable because the kernel gets replaced. Is it possible to directly freeze the kernel in the image ? One can do it by just using armbian-config -> system > freeze but it would be nice if it was done out of the box.

After I write ubuntu22.04 server/debian12 server to the SD card for the Orange Pi Zero 1GB, I run "sudo apt update" and then "sudo apt upgrade". Everything is fine. Then i reboot system and sytem in not boot.

In "armbian-config" there is no sound devices in hardware settings.

It looks like there was an issue in Armbian that prevented the Wifi radio from functioning. Armbian has fixed the issue with an update, but I believe these images will need to be updated as well.

I am not sure if I am doing something wrong but while the Orange Pi OS works fine with a USB keyboard I can't seem to enable USB on this image. Was it supposed to work ? I am not an expert in ArmBian so I apologize if works and I am just bad at setting it up.

Zero2w is h618 like zero3. Can this image be used on zero2w?

固件用的是debian12 server
使用nmcli dev wifi指令可以扫描到ssid,连接后提示Connection activation failed: The Wi-Fi network could not be found.
重复两次操作后扫描不到ssid

root orangepi不好使呢

The kernel configuration does not enable KVM, required for hardware accelerated virtualization:

CONFIG_HAVE_KVM=y
# CONFIG_VIRTUALIZATION is not set

As the Orange Pi Zero3 has 4GB of RAM, it could be used for virtualization if KVM was enabled.

Please enable KVM in the kernel:

CONFIG_HAVE_KVM=y
CONFIG_HAVE_KVM_IRQCHIP=y
CONFIG_HAVE_KVM_IRQFD=y
CONFIG_HAVE_KVM_IRQ_ROUTING=y
CONFIG_HAVE_KVM_EVENTFD=y
CONFIG_KVM_MMIO=y
CONFIG_HAVE_KVM_MSI=y
CONFIG_HAVE_KVM_CPU_RELAX_INTERCEPT=y
CONFIG_KVM_VFIO=y
CONFIG_HAVE_KVM_ARCH_TLB_FLUSH_ALL=y
CONFIG_KVM_GENERIC_DIRTYLOG_READ_PROTECT=y
CONFIG_HAVE_KVM_IRQ_BYPASS=y
CONFIG_HAVE_KVM_VCPU_RUN_PID_CHANGE=y
CONFIG_KVM_XFER_TO_GUEST_WORK=y
CONFIG_VIRTUALIZATION=y
CONFIG_KVM=y

Hello i just dive in to this SBC for fun. I would love to try this armbian OS, but i dont understand any step for it to work in my orange pi zero 3 [4GB]. Can you make the tutorial in english and for windows? Or maybe make a "ready to flash file" for 4GB varian

Thankyou very much

Please build an image for version 1.5GB of RAM
Otherwise I can’t get it to start by replacing u-boot