Comments (15)
HI, did you use wifi connection? i'll try to reproduce this issue.
from digiskimmer.
from digiskimmer.
I've apply patches to master, can you try the latest commit to see if this issue can be solved?
Thanks
from digiskimmer.
from digiskimmer.
from digiskimmer.
from digiskimmer.
it seem's your jt9 command doesn't support --ft4 param, would you please run jt9 command manually and post the result?
post your settings(the SCHEDULES section) as well.
error: unrecognised option: --ft44:[..........]
from digiskimmer.
This is my schedule section:
# simple used:
'19:00-08:30': {'hikijun1': ['20|30', 40, '80|160']},
'08:30-15:30': {'hikijun1': ['10|12|15', 17, '20|30']},
'15:30-19:00': {'hikijun1': ['10|12|15|17', '20|20+', '30|40']},
and I am looking for manual operation.
from digiskimmer.
check this line below, should be '20|20+'
or "20|20+"
, quotation marks should close-up.
'15:30-19:00': {'hikijun1': ['10|12|15|17', '20|20+", '30|40']},
from digiskimmer.
That, I corrected. I am trying to reinstall newer version of wsjtx
from digiskimmer.
Uninstalling old wsjt-x stuffs and Fresh installation wsjtx2.2.2 solved the problem. Thanks!
from digiskimmer.
@lazywalker : I am finalized my set-up with kiwisdr and digiskimmer (with ubuntu) and running fetch.py gives me the ft8 logs messages but I would like to see the complete ft8 messages in wsjt-x but when I open wsjt-x there is not messages output there ? Is there something to set-up to link fetch.py and the gui of wsjt-x ?
Thanks for your great project !
from digiskimmer.
I've apply patches to master, can you try the latest commit to see if this issue can be solved?
I can confirm that the upload issue has been solved. Running without problem since 3 days. Thank you very much.
from digiskimmer.
@lazywalker : I am finalized my set-up with kiwisdr and digiskimmer (with ubuntu) and running fetch.py gives me the ft8 logs messages but I would like to see the complete ft8 messages in wsjt-x but when I open wsjt-x there is not messages output there ? Is there something to set-up to link fetch.py and the gui of wsjt-x ?
Thanks for your great project !
Hi, the digiskimmer was designed to run as a long-run multi-band spotter, we just set and forget it :)
with these settings you can save spots to files separated by date:
LOG_SPOTS = True
LOG_TO_FILE = True
if you want to save all conversation messages(not only the CQ transmissions) during of all operating bands to files, i can add this feature, just submit an new issue, since THIS one is already closed:)
But, the digiskimmer and the GUI wsjt-x are totally different processes so there is no way to link and use them together.
if you goal is use GUI wsjtx with KiwiSDR, you can open a KiwiSDR browser with wsjt-x, use the audio output from you computer and input it to wsjt-x, you should see the messages output there.
or, you may want to try https://www.blackcatsystems.com/software/kiwiSdr-sound-client-virtual-audio-device.html, this plugin can map a KiwiSDR channel as a virtual audio device without browser opening.
Thanks for any feed back.
73
Michael
from digiskimmer.
@lazywalker : thanks for your prompt reply and :
- wsjt-x : thanks for the clarification and I will try to plug the audio output from kiwisdr to wsjt-x
- blackcatsystems : i will give a try to this project to map a virtual audio device
- logs all messages issue : I created this issue #10
Will keep you update and hope to receive more FT8 messages :)
from digiskimmer.
Related Issues (20)
- PSKreporter reporting not working for me.... HOT 2
- Possible typos in the settings.py.template file? HOT 1
- After running several days, all CPUs maxed out at 100%.... HOT 2
- Support for openwebrx HOT 2
- Raspberry Pi instructions for tmpfs HOT 4
- 2048 requested and 0 written Error? HOT 3
- WARNING 787501 [kl7na-10|10+|10!|80|80+|80!] kiwisdr.local:8073 too busy now. Reconnecting after 15 seconds HOT 2
- Adding other modes HOT 1
- No HamAlert WAS Compatibility because of PskReporter Spots Suppression in 30 Least Wanted DXCC HOT 1
- decoding queue overflow HOT 2
- Where are the template/config/settings files and how to start the app HOT 1
- Modes decoded and typo in example ? What is FST4W mode code symbol ? HOT 1
- WSPR WARNING Return code -11
- Not an issue but a Thank You - 7 hours of spotting = 111 countries HOT 2
- JS8 Capability? HOT 1
- Let DS keep free Kiwi slots enhancement
- Deprecation Warnings HOT 1
- Single digit dBm WSPR spots not uploaded (with solution)
- Disable audio compression for KiwiSDRStream
- Improvement: hashed callsigns with ft8
Recommend Projects
-
React
A declarative, efficient, and flexible JavaScript library for building user interfaces.
-
Vue.js
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
-
Typescript
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
-
TensorFlow
An Open Source Machine Learning Framework for Everyone
-
Django
The Web framework for perfectionists with deadlines.
-
Laravel
A PHP framework for web artisans
-
D3
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
-
Recommend Topics
-
javascript
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
-
web
Some thing interesting about web. New door for the world.
-
server
A server is a program made to process requests and deliver data to clients.
-
Machine learning
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
-
Visualization
Some thing interesting about visualization, use data art
-
Game
Some thing interesting about game, make everyone happy.
Recommend Org
-
Facebook
We are working to build community through open source technology. NB: members must have two-factor auth.
-
Microsoft
Open source projects and samples from Microsoft.
-
Google
Google ❤️ Open Source for everyone.
-
Alibaba
Alibaba Open Source for everyone
-
D3
Data-Driven Documents codes.
-
Tencent
China tencent open source team.
from digiskimmer.