Car Simulator pedals for Arduino, I work with occasionally to develop. If you want to develop this project feel free to do pull request to this repository.

Things todo:

• Update to support never version of MHeironimus/ArduinoJoystickLibrary
• Work with better feeling in pedals
• Maybe modify code to use rX rY and rZ axis to better reflect usual pedals axis.

This Arduino pedals have gas, brake and clutch and use a Arduino (Windows native drivers) to connect to usb port.

1. Arduino Pro Micro or any board based on ATmega32U4
2. Usb cable between Arduino board and computer.
3. 3 piece Slide Potentiometer 5kohm or hall sensors.
4. 3 cheap styling pedals for cars.
5. Spring
6. Some metall to build pedal construction in
7. Nuts, bolts and cables to potentiometer

For this you need to download MHeironimus/ArduinoJoystickLibrary (LGPL-3.0) and my Arduino project

MHeironimus/ArduinoJoystickLibrary Version 1.0
My Arduino file

Connect Gas to A0, Brake to A1 and Clutch to A2. Connect each potentiometer to +5v and GND

This electrical drawings in made in Eagle.

I build my pedal construction in steel and welding it together. One tricky part was to find spring with correct feeling. You have to test what you like. I also fond that 100mm from bottom to center of pedal was a good length for my foot.

Pedals drawings is done in Sketchup.

See this Youtube clip

Youtube clip

This project is licensed under the terms of the GNU V.3 license.