This repository contains the following parts:

1. Docker files and scripts needed to create docker containers with kerberos components in them (and some other stuff) - there are 2 containers created: a basic Kubernetes-supporting container, and the sidecar needed for client containers
2. Kerberos server Helm chart - which deploys a pod with two containers: kdc and kadmin
   • This is based on the work in https://github.com/jeffgrunewald/kuberos
3. Kerberos client Helm chart - this deploys a pod with two containers:
   • A basic container that does nothing (but has the Kerberos needed configurations in it)
   • A sidecar that is responsible for running kinit periodically, and obtaining Kerberos TGT for initial access. It stores the tickets in a memory-mapped volume that is accessible by the 1st container, thus allowing it to transparently authenticate with Kerberos.
   • This is based on the work in https://github.com/edseymour/kinit-sidecar

This section assumes that you're deploying on an Iguazio system, but it should work the same for any k8s cluster that you may have lying around. The main point about deploying on Iguazio is that the Docker container needs to be created on the app cluster, but the Helm charts are installed from the data cluster. Other than that, there should be no issue. The steps are as follows (assuming you are starting from the root directory, right here):

1. Create the server Docker image. Run the following command on the app cluster

   cd docker/server
   docker build -f Dockerfile -t kuberos:latest ./

   (You can use a different container tag, but then you need to modify the information in the values.yaml file accordingly)

2. Go the the kuberos Helm chart directory, and examine the values in values.yaml. By default you don't need to change anything. Some things you may want to change:

   • If you tagged the container differently, then you need to change the containers.image and containers.tag values to the correct tag you selected
   • If you're feeling brave, you can have the Kerberos DB stored in a PVC, to do that you need to modify the values in kdc.persistence. I haven't really checked it yet

3. Once you're satisfied, deploy the Helm chart:

   cd kuberos
   helm -n default-tenant install kuberos ./

   Assuming this worked, you should get a nice message explaining a lot of stuff. At this point you can check that the pods were created:

   $ kubectl -n default-tenant get pods
   NAME                                              READY   STATUS    RESTARTS   AGE
   kuberos-kuberos-kdc-0                             2/2     Running   0          52s

   (Of course, other containers will be there...)

4. Login to the kadmin container to configure stuff:

   kubectl -n default-tenant exec -ti kuberos-kuberos-kdc-0 --container kadmin -- /bin/bash

   Now, run kadmin.local and perform the following commands (it's an interactive shell):

   [root@kuberos-kuberos-kdc-0 bin]# kadmin.local
   Authenticating as principal root/[email protected] with password.
   addprinc -pw testpasswd iguazio
   WARNING: no policy specified for [email protected]; defaulting to no policy
   Principal "[email protected]" created.
   kadmin.local:
   kadmin.local:  addprinc -pw testpasswd krbtest
   WARNING: no policy specified for [email protected]; defaulting to no policy
   Principal "[email protected]" created.
   kadmin.local:
   kadmin.local: addprinc -randkey host/kuberos-kuberos-kdc-0.kuberos-kuberos-kdc.kerberos.svc.cluster.local
   WARNING: no policy specified for host/kuberos-kuberos-kdc-0.kuberos-kuberos-kdc.kerberos.svc.cluster.local@GODEVELOPER.NET; defaulting to no policy
   Principal "host/kuberos-kuberos-kdc-0.kuberos-kuberos-kdc.kerberos.svc.cluster.local@GODEVELOPER.NET" created.
   kadmin.local: ktadd iguazio host/kuberos-kuberos-kdc-0.kuberos-kuberos-kdc.kerberos.svc.cluster.local
   Entry for principal iguazio with kvno 2, encryption type aes256-cts-hmac-sha1-96 added to keytab FILE:/etc/krb5.keytab.
   Entry for principal iguazio with kvno 2, encryption type aes128-cts-hmac-sha1-96 added to keytab FILE:/etc/krb5.keytab.
   Entry for principal host/kuberos-kuberos-kdc-0.kuberos-kuberos-kdc.kerberos.svc.cluster.local with kvno 2, encryption type aes256-cts-hmac-sha1-96 added to keytab FILE:/etc/krb5.keytab.
   Entry for principal host/kuberos-kuberos-kdc-0.kuberos-kuberos-kdc.kerberos.svc.cluster.local with kvno 2, encryption type aes128-cts-hmac-sha1-96 added to keytab FILE:/etc/krb5.keytab.
   kadmin.local:
   kadmin.local:  exit

   List Principals

   kadmin.local:  list_principals
   K/[email protected]
   host/kuberos-kuberos-kdc-0.kuberos-kuberos-kdc.kerberos.svc.cluster.local@GODEVELOPER.NET
   [email protected]
   kadmin/[email protected]
   kadmin/[email protected]
   kadmin/kuberos-kuberos-kdc-0.kuberos-kuberos-kdc.kerberos.svc.cluster.local@GODEVELOPER.NET
   kiprop/kuberos-kuberos-kdc-0.kuberos-kuberos-kdc.kerberos.svc.cluster.local@GODEVELOPER.NET
   [email protected]
   krbtgt/[email protected]
   kadmin.local:  exit

   What these commands do is create 3 principals - 2 users (iguazio and krbtest), and a single host which corresponds to the server pod (assuming you didn't change the pod's name by messing around with the Helm parameters). Then it uses ktadd to save passwords for the iguazio user and the server host to the /etc/krb5.keytab file - this file will be used to authenticate without password later

5. Create another keytab called /etc/hdfs.keytab - for now you can just copy the krb5.keytab file - it's needed because the generate_keytab_secret expects this to also exist (it is used later for HDFS configuration)

6. Save the krb5.keytab file to a k8s secret (will be consumed by the client pod):

   source generate_keytab_secret

   This will save the keytab to a local file and generate a k8s secret from it, called secret/krb5-keytab

   Test Persistence

   kubectl get statefulset -n kerberos
   NAME                  READY   AGE
   kuberos-kuberos-kdc   1/1     22m

   kubectl get pods -n kerberos
   NAME                    READY   STATUS    RESTARTS   AGE
   kuberos-kuberos-kdc-0   2/2     Running   0          2m5s
   
   kubectl delete pod kuberos-kuberos-kdc-0 -n kerberos
   pod "kuberos-kuberos-kdc-0" deleted
   
   kubectl get pods -n kerberos
   NAME                    READY   STATUS            RESTARTS   AGE
   kuberos-kuberos-kdc-0   0/2     PodInitializing   0          12s
   
   kubectl get pods -n kerberos
   NAME                    READY   STATUS    RESTARTS   AGE
   kuberos-kuberos-kdc-0   2/2     Running   0          24s

   kubectl -n kerberos exec -ti kuberos-kuberos-kdc-0 --container kadmin -- /bin/bash
   [root@kuberos-kuberos-kdc-0 /]# kadmin.local
   Authenticating as principal root/[email protected] with password.
   kadmin.local:  list_principals
   K/[email protected]
   host/kuberos-kuberos-kdc-0.kuberos-kuberos-kdc.kerberos.svc.cluster.local@GODEVELOPER.NET
   [email protected]
   kadmin/[email protected]
   kadmin/[email protected]
   kadmin/kuberos-kuberos-kdc-0.kuberos-kuberos-kdc.kerberos.svc.cluster.local@GODEVELOPER.NET
   kiprop/kuberos-kuberos-kdc-0.kuberos-kuberos-kdc.kerberos.svc.cluster.local@GODEVELOPER.NET
   [email protected]
   krbtgt/[email protected]
   kadmin.local:

Now that you have a server running, you need to deploy a client pod that will make proper use of it. The steps to do that are as follows:

1. Create the sidecar Docker image (must be run on the app-server):

   cd docker/sidecar
   docker build -f Dockerfile -t krb_sidecar:latest ./

2. Go to the krb-client directory, and examine the values in the values.yaml file. Again, you shouldn't need to touch anything unless you modified things in the Docker creation or anything else

3. Deploy the krb-client Helm chart:

   helm -n default-tenant install krb-client ./

   This should generate a pod with 2 containers in it (client and sidecar)

   Important: you must perform this operation after creating the k8s secret (in step 5 of server deployment), otherwise the keytab will not be mounted to the client and Kerberos authentication will fail

4. To verify that the sidecar is able to initiate work with Kerberos, look at its logs:

   $ kubectl -n default-tenant logs -f krb-client-krb-client-client -c sidecar
   *** kinit at +2020-12-02
   Using default cache: /tmp/ccache/krb5kdc_ccache
   Using principal: [email protected]
   Authenticated to Kerberos v5
   Ticket cache: FILE:/tmp/ccache/krb5kdc_ccache
   Default principal: [email protected]
   
   Valid starting     Expires            Service principal
   12/02/20 13:29:57  12/03/20 13:29:56  krbtgt/[email protected]
   *** Waiting for 3600 seconds

   If a ticket is displayed (to krbtgt/[email protected]), then authentication was successful and you're good to go

Now the last step is to verify Kerberos works. We verify it by doing ssh to the kadmin container, using user iguazio whose password we saved to the keytab file. The steps are:

1. Login to the krbclient container in the client pod

   kubectl -n default-tenant exec -ti krb-client-krb-client-client -c krbclient -- /bin/bash

2. Verify that the sidecar indeed was able to share the ticket cache properly with this container:

   $ klist
   Ticket cache: FILE:/tmp/ccache/krb5kdc_ccache
   Default principal: [email protected]
   
   Valid starting     Expires            Service principal
   12/02/20 13:29:57  12/03/20 13:29:56  krbtgt/[email protected]

3. Perform ssh to the server:

   ssh iguazio@kuberos-kuberos-kdc-0.kuberos-kuberos-kdc.default-tenant.svc.cluster.local

   This should work without you specifying any password - if you need password, then something went totally wrong. To compare, try to login as user krbtest, which is a Kerberos principal but one whose password is not in the keytab:

   $ ssh krbtest@kuberos-kuberos-kdc-0.kuberos-kuberos-kdc.default-tenant.svc.cluster.local
   krbtest@kuberos-kuberos-kdc-0.kuberos-kuberos-kdc.default-tenant.svc.cluster.local's password:

   It will ask for a password, which is expected.

4. If you now exit the ssh connection, and look at the Kerberos tickets on the client side, you'll see a new ticket for the server host besides the TGT that was there earlier:

   $ klist
   Ticket cache: FILE:/tmp/ccache/krb5kdc_ccache
   Default principal: [email protected]
   
   Valid starting     Expires            Service principal
   12/02/20 13:29:57  12/03/20 13:29:56  krbtgt/[email protected]
   12/02/20 13:35:16  12/03/20 13:29:56  host/kuberos-kuberos-kdc-0.kuberos-kuberos-kdc.default-tenant.svc.cluster.local@EXAMPLE.COM

That's it! We have Kerberos working now. Much rejoice.