• Familiar UI from docker build
• Full BuildKit capabilities with container driver
• Multiple builder instance support
• Multi-node builds for cross-platform images
• Compose build support
• WIP: High-level build constructs (bake)
• TODO: In-container driver support

• Installing
• Building
  • with Docker 18.09+
  • with buildx or Docker 19.03
• Documentation
  • buildx build [OPTIONS] PATH | URL | -
  • buildx create [OPTIONS] [CONTEXT|ENDPOINT]
  • buildx use NAME
  • buildx inspect [NAME]
  • buildx ls
  • buildx stop [NAME]
  • buildx rm [NAME]
  • buildx bake [OPTIONS] [TARGET...]
  • buildx imagetools create [OPTIONS] [SOURCE] [SOURCE...]
  • buildx imagetools inspect NAME
• Setting buildx as default builder in Docker 19.03+
• Contributing

Using buildx as a docker CLI plugin requires using Docker 19.03.0 beta. A limited set of functionality works with older versions of Docker when invoking the binary directly.

Download the latest binary release from https://github.com/docker/buildx/releases/latest and copy it to ~/.docker/cli-plugins folder with name docker-buildx.

After installing you can run docker buildx to see the new commands.

$ git clone git://github.com/docker/buildx && cd buildx
$ make install

$ export DOCKER_BUILDKIT=1
$ # choose a platform that matches your architecture
$ docker build --target=binaries --platform=[darwin,windows,linux,linux/arm64] -o . git://github.com/docker/buildx
$ mv buildx ~/.docker/cli-plugins/docker-buildx

The buildx build command starts a build using BuildKit. This command is similar to the UI of docker build command and takes the same flags and arguments.

Options:

For documentation on most of these flags refer to docker build documentation in https://docs.docker.com/engine/reference/commandline/build/ . In here we’ll document a subset of the new flags.

Set the target platform for the build. All FROM commands inside the Dockerfile without their own --platform flag will pull base images for this platform and this value will also be the platform of the resulting image. The default value will be the current platform of the buildkit daemon.

When using docker-container driver with buildx, this flag can accept multiple values as an input separated by a comma. With multiple values the result will be built for all of the specified platforms and joined together into a single manifest list.

If theDockerfile needs to invoke the RUN command, the builder needs runtime support for the specified platform. In a clean setup, you can only execute RUN commands for your system architecture. If your kernel supports binfmt_misc https://en.wikipedia.org/wiki/Binfmt_misc launchers for secondary architectures buildx will pick them up automatically. Docker desktop releases come with binfmt_misc automatically configured for arm64 and arm architectures. You can see what runtime platforms your current builder instance supports by running docker buildx inspect --bootstrap.

Inside a Dockerfile, you can access the current platform value through TARGETPLATFORM build argument. Please refer to docker build documentation for the full description of automatic platform argument variants https://docs.docker.com/engine/reference/builder/#automatic-platform-args-in-the-global-scope .

The formatting for the platform specifier is defined in https://github.com/containerd/containerd/blob/v1.2.6/platforms/platforms.go#L63 .

Examples:

docker buildx build --platform=linux/arm64 .
docker buildx build --platform=linux/amd64,linux/arm64,linux/arm/v7 .
docker buildx build --platform=darwin .

Sets the export action for the build result. In docker build all builds finish by creating a container image and exporting it to docker images. buildx makes this step configurable allowing results to be exported directly to the client, oci image tarballs, registry etc.

Supported exported types are:

The local export type writes all result files to a directory on the client. The new files will be owned by the current user. On multi-platform builds, all results will be put in subdirectories by their platform.

Attribute key:

• dest - destination directory where files will be written

The tar export type writes all result files as a single tarball on the client. On multi-platform builds all results will be put in subdirectories by their platform.

Attribute key:

• dest - destination path where tarball will be written. “-” writes to stdout.

The oci export type writes the result image or manifest list as an OCI image layout tarball https://github.com/opencontainers/image-spec/blob/master/image-layout.md on the client.

Attribute key:

• dest - destination path where tarball will be written. “-” writes to stdout.

The docker export type writes the result image as an Docker image specification tarball https://github.com/moby/moby/blob/master/image/spec/v1.2.md on the client. Tarballs created by this exporter are also OCI compatible.

Attribute keys:

• dest - destination path where tarball will be written. If not specified the tar will be loaded automatically to the current docker instance.
• context - name for the docker context where to import the result

The image exporter writes the build result as an image or a manifest list. When using docker driver the image will appear in docker images. Optionally image can be automatically pushed to a registry by specifying attributes.

Attribute keys:

• name - name (references) for the new image.
• push - boolean to automatically push the image.

The registry exporter is a shortcut for type=image,push=true.

Buildx with docker driver currently only supports local, tarball exporter and image exporter. docker-container driver supports all the exporters.

If just the path is specified as a value, buildx will use the local exporter with this path as the destination. If the value is “-”, buildx will use tar exporter and write to stdout.

Examples:

docker buildx build -o . .
docker buildx build -o outdir .
docker buildx build -o - - > out.tar
docker buildx build -o type=docker .
docker buildx build -o type=docker,dest=- . > myimage.tar
docker buildx build -t tonistiigi/foo -o type=registry 

Shorthand for --output=type=registry . Will automatically push the build result to registry.

Shorthand for --output=type=docker . Will automatically load the build result to docker images.

Use an external cache source for a build. Supported types are registry and local. The registry source can import cache from a cache manifest or (special) image configuration on the registry. The local source can export cache from local files previously exported with --cache-to.

If no type is specified, registry exporter is used with a specified reference.

docker driver currently only supports importing build cache from the registry.

Examples:

docker buildx build --cache-from=user/app:cache .
docker buildx build --cache-from=user/app .
docker buildx build --cache-from=type=registry,ref=user/app .
docker buildx build --cache-from=type=local,src=path/to/cache .

Export build cache to an external cache destination. Supported types are registry, local and inline. Registry exports build cache to a cache manifest in the registry, local exports cache to a local directory on the client and inline writes the cache metadata into the image configuration.

docker driver currently only supports exporting inline cache metadata to image configuration. Alternatively, --build-arg BUILDKIT_INLINE_CACHE=1 can be used to trigger inline cache exporter.

Attribute key:

• mode - Specifies how many layers are exported with the cache. “min” on only exports layers already in the final build build stage, “max” exports layers for all stages. Metadata is always exported for the whole build.

Examples:

docker buildx build --cache-to=user/app:cache .
docker buildx build --cache-to=type=inline .
docker buildx build --cache-to=type=registry,ref=user/app .
docker buildx build --cache-to=type=local,src=path/to/cache .

Create makes a new builder instance pointing to a docker context or endpoint, where context is the name of a context from docker context ls and endpoint is the address for docker socket (eg. DOCKER_HOST value).

By default, the current docker configuration is used for determining the context/endpoint value.

Builder instances are isolated environments where builds can be invoked. All docker contexts also get the default builder instance.

Options:

Sets the builder driver to be used. There are two available drivers, each have their own specificities.

• docker - Uses the builder that is built into the docker daemon. With this driver, the --load flag is implied by default on buildx build. However, building multi-platform images or exporting cache is not currently supported.

• docker-container - Uses a buildkit container that will be spawned via docker. With this driver, both building multi-platform images and exporting cache are supported. However, images built will not automatically appear in docker images (see build --load).

Changes the action of the command to appends a new node to an existing builder specified by --name. Buildx will choose an appropriate node for a build based on the platforms it supports.

Example:

$ docker buildx create mycontext1
eager_beaver
$ docker buildx create --name eager_beaver --append mycontext2
eager_beaver

Changes the action of the command to removes a node from a builder. The builder needs to be specified with --name and node that is removed is set with --node.

Example:

docker buildx create --name mybuilder --node mybuilder0 --leave

Specifies the name of the builder to be created or modified. If none is specified, one will be automatically generated.

Specifies the name of the node to be created or modified. If none is specified, it is the name of the builder it belongs to, with an index number suffix.

Sets the platforms supported by the node. It expects a comma-separated list of platforms of the form OS/architecture/variant. The node will also automatically detect the platforms it supports, but manual values take priority over the detected ones and can be used when multiple nodes support building for the same platform.

Example:

docker buildx create --platform linux/amd64
docker buildx create --platform linux/arm64,linux/arm/v8

Automatically switches the current builder to the newly created one. Equivalent to running docker buildx use $(docker buildx create ...).

Switches the current builder instance. Build commands invoked after this command will run on a specified builder. Alternatively, a context name can be used to switch to the default builder of that context.

Shows information about the current or specified builder.

Example:

Name:   elated_tesla
Driver: docker-container

Nodes:
Name:      elated_tesla0
Endpoint:  unix:///var/run/docker.sock
Status:    running
Platforms: linux/amd64

Name:      elated_tesla1
Endpoint:  ssh://[email protected]
Status:    running
Platforms: linux/arm64, linux/arm/v7, linux/arm/v6

Ensures that the builder is running before inspecting it. If the driver is docker-container, then --bootstrap starts the buildkit container and waits until it is operational. Bootstrapping is automatically done during build, it is thus not necessary. The same BuildKit container is used during the lifetime of the associated builder node (as displayed in buildx ls).

Lists all builder instances and the nodes for each instance

Example:

docker buildx ls
NAME/NODE       DRIVER/ENDPOINT             STATUS  PLATFORMS
elated_tesla *  docker-container
  elated_tesla0 unix:///var/run/docker.sock running linux/amd64
  elated_tesla1 ssh://[email protected]        running linux/arm64, linux/arm/v7, linux/arm/v6
default         docker
  default       default                     running linux/amd64

Each builder has one or more nodes associated with it. The current builder’s name is marked with a *.

Stops the specified or current builder. This will not prevent buildx build to restart the builder. The implementation of stop depends on the driver.

Removes the specified or current builder. It is a no-op attempting to remove the default builder.

Bake is a high-level build command.

Each specified target will run in parallel as part of the build.

Options:

Specifies the bake definition file. The file can be a Docker Compose, JSON or HCL file. If multiple files are specified they are all read and configurations are combined. By default, if no files are specified, the following are parsed: docker-compose.yml docker-compose.yaml docker-bake.json docker-bake.override.json docker-bake.hcl docker-bake.override.hcl

Same as build --no-cache. Do not use cache when building the image.

Prints the resulting options of the targets desired to be built, in a JSON format, without starting a build.

$ docker buildx bake -f docker-bake.hcl --print db
{
   "target": {
      "db": {
         "context": "./",
         "dockerfile": "Dockerfile",
         "tags": [
            "docker.io/tiborvass/db"
         ]
      }
   }
}

Same as build --progress. Set type of progress output (auto, plain, tty). Use plain to show container output (default "auto").

Same as build --pull.

Override target configurations from command line.

Example:

docker buildx bake --set target.args.mybuildarg=value
docker buildx bake --set target.platform=linux/arm64

In addition to compose files, bake supports a JSON and an equivalent HCL file format for defining build groups and targets.

A target reflects a single docker build invocation with the same options that you would specify for docker build. A group is a grouping of targets.

Multiple files can include the same target and final build options will be determined by merging them together.

In the case of compose files, each service corresponds to a target.

A group can specify its list of targets with the targets option. A target can inherit build options by setting the inherits option to the list of targets or groups to inherit from.

Note: Design of bake command is work in progress, the user experience may change based on feedback.

Example HCL defintion:

group “default” {
	targets = [“db”, “webapp-dev”]
}

target “webapp-dev” {
	dockerfile = "Dockerfile.webapp"
	tags = ["docker.io/username/webapp"]
}

target “webapp-release” {
	inherits = [“webapp-dev”]
	platforms = [“linux/amd64”, “linux/arm64”]
}

target “db” {
	dockerfile = "Dockerfile.db"
	tags = [“docker.io/username/db”]
}

Imagetools contains commands for working with manifest lists in the registry. These commands are useful for inspecting multi-platform build results.

Create creates a new manifest list based on source manifests. The source manifests can be manifest lists or single platform distribution manifests and must already exist in the registry where the new manifest is created. If only one source is specified create performs a carbon copy.

Options:

Append appends the new sources to an existing manifest list in the destination.

Do not push the image, just show it.

Reads source from files. A source can be a manifest digest, manifest reference or a JSON of OCI descriptor object.

Name of the image to be created.

Examples:

docker buildx imagetools create --dry-run alpine@sha256:5c40b3c27b9f13c873fefb2139765c56ce97fd50230f1f2d5c91e55dec171907 sha256:c4ba6347b0e4258ce6a6de2401619316f982b7bcc529f73d2a410d0097730204

docker buildx imagetools create -t tonistiigi/myapp -f image1 -f image2 

Show details of image in the registry.

Example:

$ docker buildx imagetools inspect alpine
Name:      docker.io/library/alpine:latest
MediaType: application/vnd.docker.distribution.manifest.list.v2+json
Digest:    sha256:28ef97b8686a0b5399129e9b763d5b7e5ff03576aa5580d6f4182a49c5fe1913

Manifests:
  Name:      docker.io/library/alpine:latest@sha256:5c40b3c27b9f13c873fefb2139765c56ce97fd50230f1f2d5c91e55dec171907
  MediaType: application/vnd.docker.distribution.manifest.v2+json
  Platform:  linux/amd64

  Name:      docker.io/library/alpine:latest@sha256:c4ba6347b0e4258ce6a6de2401619316f982b7bcc529f73d2a410d0097730204
  MediaType: application/vnd.docker.distribution.manifest.v2+json
  Platform:  linux/arm/v6

 ...

Raw prints the original JSON bytes instead of the formatted output.

Running docker buildx install sets up docker builder command as an alias to docker buildx. This results in the ability to have docker build use the current buildx builder.

To remove this alias, you can run docker buildx uninstall.

To enter a demo container environment and experiment, you may run:

$ make shell

To validate PRs before submitting them you should run:

$ make validate-all

To generate new vendored files with go modules run:

$ make vendor