STM32L0.sleep() and STM32L0.stop() not working on B-L072Z-LRWAN1 about cmwx1zzabz HOT 4 CLOSED

On Fri, Jun 22, 2018 at 12:06 PM, Jaime Laborda ***@***.***> wrote: I'm using a B-L072Z-LRWAN1 but methods sleep() and stop() of the STM32L0 library appears to be not working. It compiles without error, but the programs just runs no matter what value you put into the methods. My code: #include <STM32L0.h> #include <Adafruit_SHT31.h> #include <Adafruit_TSL2591.h> #include "LoRaWAN.h" const char *appEui = "XXXXXXXXXXXXXXXX"; const char *appKey = "XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX"; const char *devEui = "XXXXXXXXXXXXXXXX"; #define LPP_DATATYPE_TEMPERATURE 0x67 #define LPP_DATATYPE_HUMIDITY 0x68 #define LPP_DATATYPE_ILLUMINANCE 0x65 Adafruit_SHT31 sht31; Adafruit_TSL2591 tsl = Adafruit_TSL2591(2591); void setup( void ) { Serial.begin(115200); sht31.begin(0x44); tsl.begin(); tsl.setGain(TSL2591_GAIN_MED); tsl.setTiming(TSL2591_INTEGRATIONTIME_100MS); LoRaWAN.begin(EU868); LoRaWAN.addChannel(3, 867100000, 0, 5); LoRaWAN.addChannel(4, 867300000, 0, 5); LoRaWAN.addChannel(5, 867500000, 0, 5); LoRaWAN.addChannel(6, 867700000, 0, 5); LoRaWAN.addChannel(7, 867900000, 0, 5); LoRaWAN.setDataRate(5); LoRaWAN.joinOTAA(appEui, appKey, devEui); } void loop( void ) { uint16_t temp = (uint16_t) (sht31.readTemperature() * 10); uint16_t rh = (uint16_t) (sht31.readHumidity() * 2); Serial.println("Temp: "+String(temp/10)); Serial.println("RH: "+String(rh/2)); uint32_t lum = tsl.getFullLuminosity(); uint16_t ir, full; ir = lum >> 16; full = lum & 0xFFFF; uint16_t lux = tsl.calculateLux(full, ir); Serial.println("Lux: "+String(lux)); if (!LoRaWAN.busy() && LoRaWAN.joined()) { int lpp_channel = 0; LoRaWAN.beginPacket(); LoRaWAN.write(lpp_channel++); LoRaWAN.write(LPP_DATATYPE_TEMPERATURE); LoRaWAN.write((temp >> 8) & 0xFF); LoRaWAN.write(temp & 0xFF); LoRaWAN.write(lpp_channel++); LoRaWAN.write(LPP_DATATYPE_HUMIDITY); LoRaWAN.write(rh & 0xFF); LoRaWAN.write(lpp_channel++); LoRaWAN.write(LPP_DATATYPE_ILLUMINANCE); LoRaWAN.write((lux >> 8) & 0xFF); LoRaWAN.write(lux & 0xFF); LoRaWAN.endPacket(); } STM32L0.stop(5000); } — You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub <#6>, or mute the thread <https://github.com/notifications/unsubscribe-auth/AGY1qhvwjRMlnQyAqVZwXr9ORm8ZPodlks5t_UAygaJpZM4U0SUO> .

On Sat, Jun 23, 2018 at 3:24 AM, Jaime Laborda ***@***.***> wrote: Hi Thiomas, Thank you for your reply. Test it with a simple sketch and it works sleep() either stop() methods: `#include <STM32L0.h> void setup() { // put your setup code here, to run once: Serial.begin(115200); } void loop() { // put your main code here, to run repeatedly: Serial.println("Wake!"); STM32L0.sleep(30000); }` Cannot do it works with the library LoRaWAN. Maybe due to OTAA join? I don't know if it has a lot of sense. I think i installed the library directly by cloning the github repository. I will try to update it. Thank you for your help. Regards, Jaime. — You are receiving this because you commented. Reply to this email directly, view it on GitHub <#6 (comment)>, or mute the thread <https://github.com/notifications/unsubscribe-auth/AGY1qkEy1xJgFACTK1OzcB-6flhvVW2cks5t_hdggaJpZM4U0SUO> .