Npcap is an update of WinPcap to NDIS 6 Light-Weight Filter (LWF) technique. It supports Windows Vista, 7, 8 and 10. It is sponsored but not officially supported by the Nmap Project and finished by Yang Luo under Google Summer of Code 2013 and 2015. It also received many helpful tests from Wireshark and NetScanTools.

1. NDIS 6 Support: Npcap makes use of new LWF driver in Windows Vista and later (the legacy driver is used on XP). It's faster than the legacy NDIS 5 Intermediate technique. One reason is that packet data stucture has changed (from NDIS_PACKET to NET_BUFFER_LIST) since Vista and NDIS 5 needs to handle extra packet structure conversion.
2. "Admin-only Mode" Support: Npcap supports to restrict its use to Administrators for safety purpose. If Npcap is installed with the option Restrict Npcap driver's access to Administrators only checked, when a non-Admin user tries to start a user software (Nmap, Wireshark, etc), the User Account Control (UAC) dialog will prompt asking for Administrator privilege. Only when the end user chooses Yes, the driver can be accessed. This is similar to UNIX where you need root access to capture packets.
3. "WinPcap Compatible Mode" Support: "WinPcap Compatible Mode" is used to decide whether Npcap should coexist With WinPcap or be compatible with WinPcap. With "WinPcap Compatible Mode" OFF, Npcap can coexist with WinPcap and share the DLL binary interface with WinPcap. So the applications unaware of Npcap SHOULD be able to use Npcap automatically if WinPcap is unavailable. The applications who knows Npcap's existence can choose to use Npcap or WinPcap first. The key about which is loaded first is DLL Search Path. With "WinPcap Compatible Mode" OFF, Npcap installs its DLLs into C:\Windows\System32\Npcap\ instead of WinPcap's C:\Windows\System32\. So applications who want to load Npcap first must make C:\Windows\System32\Npcap\ precedent to other paths in ways such as calling SetDllDirectory, etc. Another point is Npcap uses service name npcap instead of WinPcap's npf with "WinPcap Compatible Mode" OFF. So applications using net start npf for starting service must use net start npcap instead. If you want 100% compatibility with WinPcap, you should install Npcap choosing "WinPcap Compatible Mode" (Install Npcap in WinPcap API-compatible Mode). In this mode, Npcap will install its Dlls in WinPcap's C:\Windows\System32\ and use the npf service name. It's notable that before installing in this mode, you must uninstall WinPcap first (the installer wizard will prompt you that).
4. Loopback Packets Capture Support: Now Npcap is able to see Windows loopback packets using Windows Filtering Platform (WFP) technique. After installation, Npcap will create an adapter named Npcap Loopback Adapter for you. If you are a Wireshark user, choose this adapter to capture, you will see all loopback traffic the same way as other non-loopback adapters. Try it by typing in commands like ping 127.0.0.1 (IPv4) or ping ::1 (IPv6).
5. Loopback Packets Send Support: Besides loopback packets capturing, Npcap can also send out loopback packets based on Winsock Kernel (WSK) technique. A user software (e.g. Nmap) can just send packets out using Npcap Loopback Adapter like other adapters. Npcap Loopback Adapter will automatically remove the packet's Ethernet header and inject the payload into Windows TCP/IP stack, so this kind of loopback packet never go out of the machine.

Npcap tries to keep the original WinPcap architecture as much as possible. As the table shows, you will find it very similar with WinPcap.

File                     Src Directory            Description
wpcap.dll                wpcap                    the libpcap API, added "loopback support" to original WinPcap
packet.dll               packetWin7\Dll           the Packet API for Windows, added "Admin-only Mode" to original WinPcap
npf.sys (or npcap.sys)   packetWin7\npf           the driver, ported from NDIS 5 to NDIS 6, we support two names: npf or npcap, based on whether Npcap is installed in "WinPcap Compatible Mode"
NPFInstall.exe           packetWin7\NPFInstall    a LWF & WFP driver installation tool we added to Npcap
NPcapHelper.exe          packetWin7\Helper        the helper program for "Admin-only Mode", will run under Administrator rights

Npcap's loopback adapter device is based on Microsoft KM-TEST Loopback Adapter (Win8 and Win10) or Microsoft Loopback Adapter (Vista, Win7). It is an Ethernet adapter, and Npcap has changed its behavior and rename it to Npcap Loopback Adapter, to make it see the real loopback traffic only. The traffic captured by original WinPcap will not appear here.

The IP address of Npcap Loopback Adapter is usually like 169.254.x.x. However, this IP is totally meaningless. Softwares using Npcap should regard this interface's IP address as 127.0.0.1 (IPv4) and ::1 (IPv6). This work can't be done by Npcap because Windows forbids any IP address to be configured as 127.0.0.1 or ::1 as they're reserved.

The MAC address of Npcap Loopback Adapter is usually like 02:00:4C:4F:4F:50. However, this address is meaningless too. Softwares using Npcap should think this interface doesn't own a MAC address, as the loopback traffic never goes to link layer. For softwares using Npcap to capture loopback traffic, the MAC addresses in captured data will be all zeros (aka 00:00:00:00:00:00). For softwares using Npcap to send loopback traffic, any MAC addresses can be specified as they will be ignored. But notice that ether_type in Ethernet header should be set correctly. Only IPv4 and IPv6 are accepted. Other values like ARP will be ignored. (You don't need an ARP request for loopback interface)

The MTU of Npcap Loopback Adapte is hard-coded to 65536 by Npcap. Softwares using Npcap should get this value automatically and no special handling is needed. This value is determined personally by me and doesn't mean Windows loopback stack can only support packet size as large as 65536. So don't feel weird if you have captured packets whose size are larger than it.

Don't try to make OID requests to Npcap Loopback Adapter except OID_GEN_MAXIMUM_TOTAL_SIZE (MTU). Those requests will still succeed like other adapters do, but they only make sense for NDIS adapters and Npcap doesn't even use the NDIS way to handle the loopback traffic. The only handled OID request by Npcap is OID_GEN_MAXIMUM_TOTAL_SIZE. If you query its value, you will always get 65550 (65536 + 14). If you try to set its value, the operation will always fail.

To conclude, a software that wants to support Npcap loopback feature should do these steps:

• Detect Npcap Loopback Adapte's presence, by reading registry value Loopback at key HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\npf (or npcap if you installed Npcap With "WinPcap Compatible Mode" OFF). If Loopback value exsits, it means Npcap Loopback Adapter is OK. Then perform the following steps.
• Regard the IP address of Npcap Loopback Adapter as 127.0.0.1 (IPv4) and ::1 (IPv6).
• Regard the MAC address of Npcap Loopback Adapter as 00:00:00:00:00:00.
• If you use IP Helper API to get adapter list, you will get an interface named like Loopback Pseudo-Interface 1. This interface is a DUMMY interface by Microsoft and can't be seen in NDIS layer. And tt also takes the 127.0.0.1 IP address. A good practise for softwares is that merge the Npcap Loopback Adapter and Loopback Pseudo-Interface 1 into one, like what I have implemented for Nmap (see the code).
• Don't make use of OID requests for Npcap Loopback Adapter except OID_GEN_MAXIMUM_TOTAL_SIZE requests.

• wpcap.dll, packet.dll, NPFInstall.exe and NPcapHelper.exe need to be built using Visual Studio 2013.
• npf.sys (npcap.sys) needs to be built using Visual Studio 2015 with Windows Driver Kit 10.

Packaging steps:

• Run installer\Build.bat: build non-driver projects via MSBuild. Make sure you installed Visual Studio 2013.
• Build packetWin7\npf: build driver projects npf.sln and npcap.sln respectively via Visual Studio 2015.
• Run installer\Deploy.bat: copy and sign the files for Non-WinPcap Compatible Mode, also the installer will be generated.
• Run installer\Deploy_WinPcap.bat: copy and sign the files for WinPcap Compatible Mode, also the installer will be generated.

Npcap uses NSIS script to package itself. The script is located in: installer\NPcap-for-nmap.nsi. Compiling this script will generate the installer named npcap-nmap-%VERSION%.exe.

installer\Deploy.bat and installer\Deploy_WinPcap.bat will help you copy the files from build directories into correct deployment folders (you need to manually create these folders before deployment):

XP (the same with original WinPcap):
  x86:
    installer\npf.sys
    installer\rpcapd.exe
    installer\wpcap.dll
    installer\nt5\x86\Packet.dll
  x64:
    installer\x64\npf.sys
    installer\x64\wpcap.dll
    installer\nt5\x64\Packet.dll

Vista (with "WinPcap Compatible Mode" OFF):
  x86:
    installer\vista\x86\npcap.cat
    installer\vista\x86\npcap.inf
	installer\vista\x86\npcap_wfp.inf
    installer\vista\x86\npcap.sys
    installer\win7_above\x86\NPFInstall.exe
	installer\win7_above\x86\NPcapHelper.exe
    installer\win7_above\x86\Packet.dll
    installer\wpcap.dll
  x64:
    installer\vista\x64\npcap.cat
    installer\vista\x64\npcap.inf
	installer\vista\x64\npcap_wfp.inf
    installer\vista\x64\npcap.sys
    installer\win7_above\x64\NPFInstall.exe
	installer\win7_above\x64\NPcapHelper.exe
    installer\win7_above\x64\Packet.dll
    installer\x64\wpcap.dll

Vista (with "WinPcap Compatible Mode" ON, this is the DEFAULT option):
  x86:
    installer\vista_winpcap\x86\npf.cat
    installer\vista_winpcap\x86\npf.inf
	installer\vista_winpcap\x86\npf_wfp.inf
    installer\vista_winpcap\x86\npf.sys
    installer\win7_above_winpcap\x86\NPFInstall.exe
	installer\win7_above_winpcap\x86\NPcapHelper.exe
    installer\win7_above_winpcap\x86\Packet.dll
    installer\wpcap.dll
  x64:
    installer\vista_winpcap\x64\npf.cat
    installer\vista_winpcap\x64\npf.inf
	installer\vista_winpcap\x64\npf_wfp.inf
    installer\vista_winpcap\x64\npf.sys
    installer\win7_above_winpcap\x64\NPFInstall.exe
	installer\win7_above_winpcap\x64\NPcapHelper.exe
    installer\win7_above_winpcap\x64\Packet.dll
    installer\x64\wpcap.dll

Win7 and later (with "WinPcap Compatible Mode" OFF):
  x86:
    installer\win7_above\x86\npcap.cat
    installer\win7_above\x86\npcap.inf
	installer\win7_above\x86\npcap_wfp.inf
    installer\win7_above\x86\npcap.sys
    installer\win7_above\x86\NPFInstall.exe
	installer\win7_above\x86\NPcapHelper.exe
    installer\win7_above\x86\Packet.dll
    installer\wpcap.dll
  x64:
    installer\win7_above\x64\npcap.cat
    installer\win7_above\x64\npcap.inf
	installer\win7_above\x64\npcap_wfp.inf
    installer\win7_above\x64\npcap.sys
    installer\win7_above\x64\NPFInstall.exe
	installer\win7_above\x64\NPcapHelper.exe
    installer\win7_above\x64\Packet.dll
    installer\x64\wpcap.dll

Win7 and later (with "WinPcap Compatible Mode" ON, this is the DEFAULT option):
  x86:
    installer\win7_above_winpcap\x86\npf.cat
    installer\win7_above_winpcap\x86\npf.inf
	installer\win7_above_winpcap\x86\npf_wfp.inf
    installer\win7_above_winpcap\x86\npf.sys
    installer\win7_above_winpcap\x86\NPFInstall.exe
	installer\win7_above_winpcap\x86\NPcapHelper.exe
    installer\win7_above_winpcap\x86\Packet.dll
    installer\wpcap.dll
  x64:
    installer\win7_above_winpcap\x64\npf.cat
    installer\win7_above_winpcap\x64\npf.inf
	installer\win7_above_winpcap\x64\npf_wfp.inf
    installer\win7_above_winpcap\x64\npf.sys
    installer\win7_above_winpcap\x64\NPFInstall.exe
	installer\win7_above_winpcap\x64\NPcapHelper.exe
    installer\win7_above_winpcap\x64\Packet.dll
    installer\x64\wpcap.dll

1. Download and install the latest Npcap installer: https://github.com/nmap/npcap/releases
2. Use Nmap or Wireshark to test Npcap.
3. Vista and Win7 users may have a driver signing problem when installing, please refer to https://github.com/nmap/npcap/releases/tag/v0.05-r8 and https://ask.wireshark.org/tags/npcap/ for solutions.

https://svn.nmap.org/nmap-exp/yang/NPcap-LWF/npcap_history_versions/

https://svn.nmap.org/nmap-exp/yang/nmap-npcap/

https://svn.nmap.org/nmap-exp/yang/nmap-npcap_compiled_binaries/

The MIT License (MIT).

• [email protected] (Nmap development list, this is preferred)
• [email protected] (Yang Luo's email, if your issue needs to be kept private, please contact me via this mail)