PMW3360 breakout board for trackball/mouse. Compatible with 1.8V - 5.5V Vcc.
Name | Value | Footprint | Qty |
---|---|---|---|
C1,C3,C6,C7,C9,C12,C13 | 100nF | 0805 | 7 |
C2,C5 | 1uF | 0805 | 2 |
C4,C8,C11,C14 | 10uF | 0805 | 4 |
C10 | 4.7uF | 0805 | 1 |
DMOSI,DNCS,DSCLK | 3.3V | SOD-323 | 3 |
R1 | 52.3k | 0805 | 1 |
R3 | 37.4k | 0805 | 1 |
R4 | 39 Ohm | 0805 | 1 |
R5 | 63.4k | 0805 | 1 |
R6,R7 | 10k | 0805 | 2 |
R8 | 30.1k | 0805 | 1 |
U1,U3 | SOT23 | 2 | |
PMW3360 + lens | 1 |
Optional (for easier prototyping)
Name | Qty | Notes |
---|---|---|
H1 | 1 | 8 pin (2x4) 2.54 pitch male through hole pin header |
Remarks:
- PCB/Holes are the same size/placement as for ADNS-9800 thus making it easier to swap sensors for existing projects
- Diodes are 3.3V Zener diodes
- U1, U3 are TPS73601DBVR LDO volatge stabilizers
- 8 pin male header is usefull for prototyping when sensor has to be switched between many MCUs
- Sensor together with the lens can be obtained from Aliexpress