Config issues in Happy Hare 2.51 about ercf_filament_cutter HOT 4 OPEN

You should keep _MMU_FORM_TIP as your tip forming macro, and instead edit:

variable_user_post_unload_extension : 'EREC_CUTTER_ACTION' ; Executed after default logic

in your mmu_macro_vars.cfg

from ercf_filament_cutter.

Ok I understood what was the problem... Of course I need tip forming to unload the filament from the extruder, so i changed to _MMU_FORM_TIP and then the variable_user_post_unload_extension : "EREC_CUTTER_ACTION" do the rest.

Sorry for bothering

Thank you very much for your amazing work guys

from ercf_filament_cutter.

You should keep _MMU_FORM_TIP as your tip forming macro, and instead edit:

variable_user_post_unload_extension : 'EREC_CUTTER_ACTION' ; Executed after default logic

in your mmu_macro_vars.cfg

Yeah thanks of course I needed it XD

from ercf_filament_cutter.

Sorry if I bother,
I've got now only a minor issue and after resolve it I think I'm good to go:

I tuned every position values of toolhead sensor, extruder to nozzle etc (I had the ercf v.1.1 version so I had to customize everything manually) but the filament loading is kinda "too fast" and now I've got a huge blob during the filament change that stucks on my nozzle and then goes to the wipe tower... I haven't got a blobifier yet.
Any suggestion?
With the same values I didn't have such a huge blob in ERCF v.1.1 but I had everything set properly on the slicer too wherease now I'm trying to follow the guides and let the HH do everything

from ercf_filament_cutter.