Support for ERCF V1.1 about ercf_filament_cutter HOT 11 OPEN

I added the V-Bearing Version of the Encoder and removed the clearance i needed
V1.1 Binky Encoder for EREC.zip

from ercf_filament_cutter.

Hi,
did you find the time to test your mod out? I would like to add it in some kind of usermods section.

from ercf_filament_cutter.

I just built it but currently don't have any multifilament prints planned. If the V2.0 encoder works, then my mod also works. The only thing I changed is the magnet on the back, which I can confirm can open the V1.1 gates.

from ercf_filament_cutter.

so... if i have a v1 with binky, springy, sturdy bunny and triple decky.. i pretty much have a V2 minus some bling?
and beta 6 should work on it?

from ercf_filament_cutter.

Maybe... I designed the Encoder to work with the default V1.1 Filament blocks

from ercf_filament_cutter.

so... if i have a v1 with binky, springy, sturdy bunny and triple decky.. i pretty much have a V2 minus some bling? and beta 6 should work on it?

With all the mods it is basically already a V2, if you are still using the triple decky magnet gates try this mod, otherwise the normal Beta6 files should work just fine

from ercf_filament_cutter.

ok, sweet. just noticed i wrote the wrong block mod. i use thumper blocks :)
so i guess beta6 will work just fine as is for me then

from ercf_filament_cutter.

Hi again,
Do you know how to do Pull Requests on GitHub? I made a little Usermods section in the repo, similar to the VORON usermods. I would like to add some mods for EREC there ^^

from ercf_filament_cutter.

I don't know completly understand what pull requests are but yes, do so.

from ercf_filament_cutter.

I don't know completly understand what pull requests are but yes, do so.

You are not the only one who doesn't understand how PRs work, already got some feedback that this system is way to complicated. I completely agree since it took me almost a month to understand GitHub completely, it's not really user friendly but sadly the only way how others can contribute to the repository.
As a solution I think a simple printables link would be the best, just upload everything and share the link. If you update the mod just do the stuff on printables. Would you be so nice and do that for your usermod?

Sorry for the hassle, here is a cookie 🍪.

from ercf_filament_cutter.

I am using ERCF system V1.0, but with binky style optical decoder.
I measured a few important distance in CAD , seems all fit, so I printed and tried the Beta6 with beta6 encoder case, it works well.
so maybe in BETA6 readme do not say "beta6 dropped support" for ERCF1, hopefully more people still using ERCF1 can use this useful cutter addon.
Right, about the magnet door lock washer, I just removed them all...

from ercf_filament_cutter.