AD5940 is the latest high precision impedance and electrochemical front end. It communicates with external MCU via SPI bus.

This repository targets to provide rich examples for you to get start with and provide system level examples like EDA(electrodermal activity), BIA(Body Impedance Analysis) which you can use directly in your project.

• AD5940 Wiki
• AD5940 Datasheet
• AD5940 FAQ
• SensorPal The GUI tool used with Evaluation Board
• Evaluation Boards:
  • EVAL-AD5940BIOZ Board information: Wiki
  • EVAL-AD5940ELEC Board information: Wiki

Firstly, checkout the repository using below command. Make sure you have cloned the ad5940lib submodule which these examples are based on.

git clone --recursive https://github.com/analogdevicesinc/ad5940-examples.git

If you are downloading code from web browser, it won't automatically download folder examples/ad5940lib, please download it manually from ad5940lib and extract it to examples/ad5940lib.

The final file structure should be:

ad5940-examples\doc...
ad5940-examples\examples\ad5940lib\ad5940.c
ad5940-examples\examples\ad5940lib\ad5940.h
ad5940-examples\LICENSE...
ad5940-examples\README.md...

To run the example code, you need the AD5940 evaluation board, and the software development IDE like IAR or Keil.

Keil is verified on all examples and it's recommended.

If you want to use IAR, do not forget to manually install ADuCM3029 Device Support Pack(ADuCM302x_DFP) from IAR CMSIS-Pack-Manager, under tab 'Packs/AnalogDevices.ADuCM302x_DFP'.

Currently, there are two kinds of EVB.

• EVAL-AD5940BIOZ is used for healthcare application like EDA/BIA/ECG. You can find the related introduction in Wiki.
• EVAL-AD5940ELEC is used for industrial application like Gas Detection with electrochemical sensor, Water Quality etc. It has on board socket for gas sensor and a BNC connector for PH sensor. The USB connector actually carries the analog signal from AD5940 which allows you to connect any other sensors so you can do either impedance measurement or used as potentiostat circuit. Find more introduction on Wiki.

Both IAR and Keil example projects are provided.

On how to use the IAR project, follow this link from ADI Wiki.

For Keil project, follow this link.

Note: CMSIS pack is used in all examples, make sure you installed the pack no matter in Keil or IAR.

Copyright (c) 2017-2019 Analog Devices, Inc. All Rights Reserved.