The Kite Examples project provides examples of how to use the Kite SDK.

Each example is a standalone Maven module with associated documentation.

• dataset is the closest to a HelloWorld example of Kite. It shows how to create datasets and perform streaming writes and reads over them.
• dataset-hbase shows how to store entities in HBase using the RandomAccessDataset API.
• dataset-staging shows how to use two datasets to manage Parquet-formatted data
• logging is an example of logging events from a command-line programs to Hadoop via Flume, using log4j as the logging API.
• logging-webapp is like logging, but the logging source is a webapp.

• demo is a full end-to-end example of a webapp that logs events using Flume and performs session analysis using Crunch and Hive.

The easiest way to run the examples is on the Cloudera QuickStart VM, which has all the necessary Hadoop services pre-installed, configured, and running locally. See the notes below for any initial setup steps you should take.

The current examples run on version 5.1.0 of the QuickStart VM.

Checkout the latest branch of this repository in the VM:

git clone git://github.com/kite-sdk/kite-examples.git
cd kite-examples

Then choose the example you want to try and refer to the README in the relevant subdirectory.

There are two ways to run the examples with the QuickStart VM:

1. Logged in to the VM guest (username and password are both cloudera).
2. From your host computer.

The advantage of the first approach is that you don't need to install anything extra on your host computer, such as Java or Maven, so there are no fewer set up steps.

For either approach, you need to make the following changes while logged into the VM:

• Sync the system clock For some of the examples it's important that the host and guest times are in sync. To synchronize the guest, login and type sudo ntpdate pool.ntp.org.
• Configure the NameNode to listen on all interfaces In order to access the cluster from the host computer, the NameNode must be configured to listen on all network interfaces. This is done by setting the dfs.namenode.rpc-bind-host property in /etc/hadoop/conf/hdfs-site.xml:

  <property>
    <name>dfs.namenode.rpc-bind-host</name>
    <value>0.0.0.0</value>
  </property>

• Configure the History Server to listen on all interfaces In order to access the cluster from the host computer, the History Server must be configured to listen on all network interfaces. This is done by setting the mapreduce.jobhistory.address property in /etc/hadoop/conf/mapred-site.xml:

  <property>
    <name>mapreduce.jobhistory.address</name>
    <value>0.0.0.0:10020</value>
  </property>

• Configure HBase to listen on all interfaces In order to access the cluster from the host computer, HBase must be configured to listen on all network interfaces. This is done by setting the hbase.master.ipc.address and hbase.regionserver.ipc.address properties in /etc/hbase/conf/hbase-site.xml:

  <property>
    <name>hbase.master.ipc.address</name>
    <value>0.0.0.0</value>
  </property>

  <property>
    <name>hbase.regionserver.ipc.address</name>
    <value>0.0.0.0</value>
  </property>

• Restart the vm Restart the VM with sudo shutdown -r now

The second approach is preferable when you want to use tools from your own development environment (browser, IDE, command line). However, there are a few extra steps you need to take to configure the QuickStart VM, listed below:

• Add a host entry for quickstart.cloudera Add or edit a line like the following in /etc/hosts on the host machine

127.0.0.1       localhost.localdomain   localhost       quickstart.cloudera

• Enable port forwarding Most of the ports that need to be forward are pre-configured on the QuickStart VM, but there are few that we need to add. For VirtualBox, open the Settings dialog for the VM, select the Network tab, and click the Port Forwarding button. Map the following ports - in each case the host port and the guest port should be the same. Also, your VM should not be running when you are making these changes.
  • 8032 (YARN ResourceManager)
  • 10020 (MapReduce JobHistoryServer)

If you have VBoxManage installed on your host machine, you can do this via command line as well. In bash, this would look something like:

# Set VM_NAME to the name of your VM as it appears in VirtualBox
VM_NAME="QuickStart VM"
PORTS="8032 10020"
for port in $PORTS; do
  VBoxManage modifyvm "$VM_NAME" --natpf1 "Rule $port,tcp,,$port,,$port"
done

• What are the usernames/passwords for the VM?

  • Cloudera manager: cloudera/cloudera
  • HUE: cloudera/cloudera
  • Login: cloudera/cloudera

• I can't find the file in VirtualBox (or VMWare)!

  • You probably need to unpack it: In Windows, install 7zip, and extract the VM files from the .7z file. In linux or mac, cd to where you copied the file and run 7zr e cloudera-quickstart-vm-4.3.0-kite-vbox-4.4.0.7z
  • You should be able to import the extracted files to VirtualBox or VMWare

• How do I open a .ovf file?

  • Install and open VirtualBox on your computer
  • Under the menu "File", select "Import..."
  • Navigate to where you unpacked the .ovf file and select it

• What is a .vmdk file?

  • The .vmdk file is the virtual machine disk image that accompanies a .ovf file, which is a portable VM description.

• How do I open a .vbox file?

  • Install and open VirtualBox on your computer
  • Under the menu "Machine", select "Add..."
  • Navigate to where you unpacked the .vbox file and select it

• How do I fix "VTx" errors?

  • Reboot your computer and enter BIOS
  • Find the "Virtualization" settings, usually under "Security" and enable all of the virtualization options

• How do I get my mouse back?

  • If your mouse/keyboard is stuck in the VM (captured), you can usually release it by pressing the right CTRL key. If you don't have one (or that didn't work), then the release key will be in the lower-right of the VirtualBox window

• Other problems

  • Using VirtualBox? Try using VMWare.
  • Using VMWare? Try using VirtualBox.