jsl-1 / nfirmwareeditor Goto Github PK

Hello, just dropping in to suggest that the README.md for this project should contain the instructions for running on Linux. Especially, I had to install the "mono-complete" on Ubuntu 16.04 (Xenial) here otherwise I would get this error:

Unhandled Exception:
System.IO.FileNotFoundException: Could not load file or assembly 'System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089' or one of its dependencies.

Running Ubuntu 16.04.

I have libudev1 and mono-complete installed.

NToolBox.exe runs, but the ArcticFox configuration does not find the device ("device is disconnected").

The device is an Eleaf Pico with the latest stable ArcticFox firmware (170103)

The box is identified by the lsusb command as:
Bus 003 Device 008: ID 0416:5020 Winbond Electronics Corp.

This is what is logged by dmesg when I plug it in.

[1902920.434054] usb 3-1: new full-speed USB device number 9 using xhci_hcd
[1902920.599181] usb 3-1: New USB device found, idVendor=0416, idProduct=5020
[1902920.599187] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[1902920.599190] usb 3-1: Product: HID Transfer
[1902920.599193] usb 3-1: Manufacturer: Nuvoton
[1902920.599195] usb 3-1: SerialNumber: A02015081302
[1902920.617308] input: Nuvoton HID Transfer as /devices/pci0000:00/0000:00:1c.6/0000:05:00.0/usb3/3-1/3-1:1.0/0003:0416:5020.0029/input/input55
[1902920.617655] hid-generic 0003:0416:5020.0029: input,hidraw3: USB HID v1.10 Device [Nuvoton HID Transfer] on usb-0000:05:00.0-1/input0

Thanks for any help.

Hello,

would you kindly provide instructions about how to build on Linux?
The README file still shows windows screenshots.

Thank you very much