jroal / a2dpvolume Goto Github PK
View Code? Open in Web Editor NEWAutomatically exported from code.google.com/p/a2dpvolume
Home Page: http://jimroal.com/slist.htm
Automatically exported from code.google.com/p/a2dpvolume
Home Page: http://jimroal.com/slist.htm
What steps will reproduce the problem?
Export Data
What is the expected output? What do you see instead?
Tell me where it put it
Please use labels and text to provide additional information.
Original issue reported on code.google.com by [email protected]
on 21 Oct 2010 at 8:57
Since you can open an app on connect, it is possible to close one on
disconnect? For example, I'd like to start Pandora when connecting to an A2DP
headset (it does this fine now), and shut it down when disconnecting (Pandora
pauses itself, but I'd like to actually close the app).
Original issue reported on code.google.com by [email protected]
on 24 Jul 2011 at 2:05
The slider bar on the main screen is used to adjust the media volume. However,
it does not display the current volume when the current volume gets adjusted
elsewhere. On program start it will be set based on the current media volume.
When you use it to adjust the volume, it will reflect the current media volume.
When anything else adjust the media volume, it does not adjust to reflect the
new volume.
Would need to implement a media volume listener to keep the slider bar
reflecting the current media volume.
Original issue reported on code.google.com by [email protected]
on 1 Nov 2010 at 10:51
I can't figure out how to determine which device is currently connected. I
tried the obvious getRemoteDevice(mac address) but it just returns the info on
the bonded device every time, connected or not. I ave searched the web but
can't find anyone else who has been able to determine the connected device
either, except when using serial port type communications (which I am not
here).
Original issue reported on code.google.com by [email protected]
on 10 Oct 2010 at 3:24
What steps will reproduce the problem?
Export data files
What is the expected output? What do you see instead?
Tell me where the file went
Please use labels and text to provide additional information.
Original issue reported on code.google.com by [email protected]
on 21 Oct 2010 at 8:58
[deleted issue]
This is similar to other apps on the market. However, I have not seen another
free one that looks for the bluetooth connection to enable/disable it
automatically. This could be done by integrating with another app or just
create it internally.
Original issue reported on code.google.com by [email protected]
on 19 Jul 2011 at 12:30
[deleted issue]
When you click on a device in the list, then click the edit data button, then
click the save button in that dialog box, it does save the data but it does not
close the dialog. You have to hit the back key to exit it.
Original issue reported on code.google.com by [email protected]
on 29 Oct 2010 at 3:09
After the media volume is set to the saved value by a2dpvolume, I always have
to open the mediaplayer (e.g. Winamp) and start the playback. It would be nice,
if the playback would automatically start, after the connection to the
bluetooth device is established and automatically stop after the bluetooth
device is disconnected.
Original issue reported on code.google.com by [email protected]
on 3 May 2011 at 7:47
A widget is needed to launch the link to show the location of the car. The gui
is good for editing, but I quickly want to launch my link wih one click.
Original issue reported on code.google.com by [email protected]
on 22 Nov 2010 at 1:57
Droid 2 has a different app for car mode. This app does not appear to trigger
car mode in Android so the car mode disconnect listener never triggers. The
original Droid works fine.
Original issue reported on code.google.com by [email protected]
on 19 Nov 2010 at 1:34
What steps will reproduce the problem?
1. Run program with no devices configured.
2. Click on the "no data" link.
3. Program force closes...
The program should indicate that there is nothing to look at. Better would be
to grey out the link, so it is not even possible for a user to select that
option.
Original issue reported on code.google.com by [email protected]
on 27 Oct 2010 at 12:28
Hi and thanks for this great app.
When I listen music via A2DP in my car and when I let wifi on, music is
shuttering when the phone fix an open hotspot (known Android issue).
Would be nice to have an option to turn off Wifi when paired, and the turn it
on again.
Thanks again !
Original issue reported on code.google.com by pierre.burel
on 21 Jun 2011 at 11:46
Would like to implement the location capture for each device separately. This
way if you have more than one car you can keep track of where you left them
all. In order to do this, we need to know what device is actually connected.
See issue 1.
Original issue reported on code.google.com by [email protected]
on 10 Oct 2010 at 3:35
Device (phone) brand: Motorola
Device (phone) model: Droid X2
Android OS version: 2.2.3
App version: A2DP Volume 2.0.3 test
What steps will reproduce the problem?
1. Install
2. Open
3. Force Close
What is the expected output? What do you see instead?
No crash.
Please provide any additional information below.
Original issue reported on code.google.com by [email protected]
on 30 Jun 2011 at 11:17
So far I have implemented everything based on portrait screen orientation only.
Need to implement support for landscape screen too. Sometimes the application
may even crash if you are editing a device because of this.
Original issue reported on code.google.com by [email protected]
on 10 Oct 2010 at 3:33
Great app. I'd love to see an option to turn off/on wifi. And, french
translations are awful (google-translated i guess) : english would be better.
Original issue reported on code.google.com by [email protected]
on 3 May 2011 at 10:40
see summary
Original issue reported on code.google.com by [email protected]
on 31 Oct 2010 at 4:31
Device (phone) brand: motorola
Device (phone) model: Droid
Android OS version: 2.2
App version: main
What steps will reproduce the problem?
1. Connect to another phone via bluetooth
2. Transfer image
3. On disconnect volume left at max
What is the expected output? What do you see instead?
Device was configured to not adjust volume but it triggered on disconnect
anyway. Connected and reported proper device, volume was not adjusted on
connect. On disconnect reported stored volume as 15 and set vol to 15.
Please provide any additional information below.
Original issue reported on code.google.com by [email protected]
on 9 Apr 2011 at 9:24
Need to implement the auto start at boot. I had this sort-of working at one
time. Not sure how to make it configurable though. I hate it when everything
autostarts by default. I like to choose what I want to auto start.
Original issue reported on code.google.com by [email protected]
on 11 Oct 2010 at 1:12
[deleted issue]
The icon for this app is ugly. Need a better one.
Original issue reported on code.google.com by [email protected]
on 1 Nov 2010 at 10:56
Error #4 from Android Market report. A bluetooth device was paired but
apparently did not report a device name at all. When inserting into the
database, the app tried to bind a null value and an exception was thrown.
v1.3.5
Dec 27, 2010 6:29:49 PM
java.lang.IllegalArgumentException: the bind value at index 1 is null
at android.database.sqlite.SQLiteProgram.bindString(SQLiteProgram.java:234)
at a2dp.Vol.DeviceDB.insert(DeviceDB.java:67)
at a2dp.Vol.main.getBtDevices(main.java:557)
at a2dp.Vol.main.access$3(main.java:505)
at a2dp.Vol.main$7.onClick(main.java:209)
at android.view.View.performClick(View.java:2408)
at android.view.View$PerformClick.run(View.java:8818)
at android.os.Handler.handleCallback(Handler.java:587)
at android.os.Handler.dispatchMessage(Handler.java:92)
at android.os.Looper.loop(Looper.java:143)
at android.app.ActivityThread.main(ActivityThread.java:4701)
at java.lang.reflect.Method.invokeNative(Native Method)
at java.lang.reflect.Method.invoke(Method.java:521)
at
com.android.internal.os.ZygoteInit$MethodAndArgsCaller.run(ZygoteInit.java:868)
at com.android.internal.os.ZygoteInit.main(ZygoteInit.java:626)
at dalvik.system.NativeStart.main(Native Method)
Original issue reported on code.google.com by [email protected]
on 29 Dec 2010 at 3:17
Since version 1.4.0, a BluetoothVol folder is created at SD card root.
Maybe it would be better to create it in /Android/data/<package>, as mentioned
in
http://developer.android.com/guide/topics/data/data-storage.html#filesExternal ?
I like to keep my SD clean :)
Thx !
Original issue reported on code.google.com by pierre.burel
on 21 Jun 2011 at 11:53
Hi,
the German translation recently added makes the application completely
un-understandable. You cannot understand the menu items anymore. The German
used there looks bader than Google Translate :-)
Please remove it again or give some hints how to change the App Language back
to English (on a German Phone).
Even the App Title in the Drawer "A2DB Band" is totally wrong. Even in German
"A2DP Volume" is correct ("Volume" is a often used word in Germany)!
Original issue reported on code.google.com by uwe.h.schindler
on 23 Apr 2011 at 11:14
What steps will reproduce the problem?
1. Load no data
2. Select the "no data" list item
3.
What is the expected output? What do you see instead?
Need to make sure it is not no data before reading db.
Please use labels and text to provide additional information.
Original issue reported on code.google.com by [email protected]
on 26 Oct 2010 at 5:16
Hi, I was trying out your app, I thought you might like some useful feedback.
Things I do when using a2dp in my car, after I plug in the charge cable.
1. Set screen to stay awake
2. Set maximum brightness
3. Press play on my head deck to start launch the default music player.
Right now I use tasker to set those items when bt connects, however I cannot
specify a device or a2dp specifically with tasker only bt in general, they
would be a fantastic addition to your app if I could choose my car specifically
for this actions.
Original issue reported on code.google.com by [email protected]
on 16 Jul 2011 at 3:36
v1.4.0Apr 20, 2011 2:43:48 AM1 reports/week
3%1reports
--------------------------------------------------------------------------------
java.lang.RuntimeException: Error receiving broadcast Intent {
act=android.bluetooth.device.action.ACL_DISCONNECTED (has extras) } in
a2dp.Vol.service$2@48cd43c0
at
android.app.ActivityThread$PackageInfo$ReceiverDispatcher$Args.run(ActivityThrea
d.java:981)
at android.os.Handler.handleCallback(Handler.java:587)
at android.os.Handler.dispatchMessage(Handler.java:92)
at android.os.Looper.loop(Looper.java:143)
at android.app.ActivityThread.main(ActivityThread.java:5068)
at java.lang.reflect.Method.invokeNative(Native Method)
at java.lang.reflect.Method.invoke(Method.java:521)
at
com.android.internal.os.ZygoteInit$MethodAndArgsCaller.run(ZygoteInit.java:858)
at com.android.internal.os.ZygoteInit.main(ZygoteInit.java:616)
at dalvik.system.NativeStart.main(Native Method)
Caused by: java.lang.NullPointerException
at a2dp.Vol.service.grabGPS(service.java:580)
at a2dp.Vol.service$2.onReceive(service.java:329)
at
android.app.ActivityThread$PackageInfo$ReceiverDispatcher$Args.run(ActivityThrea
d.java:964)
... 9 more
--------------------------------------------------------------------------------
v1.4.0Apr 20, 2011 1:23:14 AM1 reports/week
3%1reports
--------------------------------------------------------------------------------
java.lang.RuntimeException: Error receiving broadcast Intent {
act=android.bluetooth.device.action.ACL_DISCONNECTED (has extras) } in
a2dp.Vol.service$2@4615d6a8
at
android.app.ActivityThread$PackageInfo$ReceiverDispatcher$Args.run(ActivityThrea
d.java:942)
at android.os.Handler.handleCallback(Handler.java:587)
at android.os.Handler.dispatchMessage(Handler.java:92)
at android.os.Looper.loop(Looper.java:143)
at android.app.ActivityThread.main(ActivityThread.java:4701)
at java.lang.reflect.Method.invokeNative(Native Method)
at java.lang.reflect.Method.invoke(Method.java:521)
at
com.android.internal.os.ZygoteInit$MethodAndArgsCaller.run(ZygoteInit.java:860)
at com.android.internal.os.ZygoteInit.main(ZygoteInit.java:618)
at dalvik.system.NativeStart.main(Native Method)
Caused by: java.lang.NullPointerException
at a2dp.Vol.service.grabGPS(service.java:580)
at a2dp.Vol.service$2.onReceive(service.java:329)
at
android.app.ActivityThread$PackageInfo$ReceiverDispatcher$Args.run(ActivityThrea
d.java:910)
... 9 more
Original issue reported on code.google.com by [email protected]
on 20 Apr 2011 at 12:12
Widget to connect/disconnect single bluetooth (a2dp) devices
Would be nice as a new app also. Something like Market-App 'Bluetooth A2DP
Switcher Widget', that works only with Android 1.6.
Grateful salute
justr
Original issue reported on code.google.com by [email protected]
on 17 Apr 2011 at 11:53
When it landscape screen orientation, the save button is hidden when editing a
device.
Original issue reported on code.google.com by [email protected]
on 12 Nov 2010 at 3:14
Device (phone) brand: HTC
Device (phone) model: Perspire. Err. Inspire.
Android OS version:
App version: A2.1 or main: Main
What steps will reproduce the problem?
1. Installing
2. Starting Service
3. Getting into my Vehicle (2011 Ford F250 with Ford SYNC)
What is the expected output? What do you see instead?
I expected the bluetooth volume to go to the set level (level 15). When it
didn't happen, I looked at my phone and saw that (the application closed
unexpectedly.
Please provide any additional information below.
Great concept. I know its hard getting everything working on all the
manufacturers phones but get this working and I would be happy to pay for it.
Thanks!
Keith
Original issue reported on code.google.com by [email protected]
on 22 Feb 2011 at 6:28
Right now there is no way to remove a single device from the database. You can
delete the entire database and start over but it would be very nice to be able
to remove one at a time. For instance, when you unpair something and want it
gone.
There is a button in the lost short click event that says "delete" and this is
where I planned to implement the device delete. However, should it also delete
devices not found to be bonded on the "find A2DP Devices" call? I guess there
could be a dialog that pops up after the scan for devices that asks whether to
delete devices in the database that are no longer bonded.
Original issue reported on code.google.com by [email protected]
on 18 Oct 2010 at 10:58
Volume works fine. Detect connect and disconnect fine. Spawns location
listener fine. However clicking stored location always shows "no data". Both
long and short press produce the same result. Works fine on motorola, htc, and
other samsung models. This issue has been the cause of every poor rating of
this app.
Original issue reported on code.google.com by [email protected]
on 19 Dec 2010 at 7:08
Device (phone) brand: HTC
Device (phone) model: Desire
Android OS version: 2.2
App version: 2.0.8
What steps will reproduce the problem?
1. Enable the menu option "get location on car mode disconnect" in previous
version, in new version the text is little bit different
2. Disable location on bluetooth disconnect (to not interfere with car mode
disconnect)
3. Remove Phone from Car Holder / disable Car Mode
What is the expected output? What do you see instead?
The Exit of Car mode no longer captures the Location
Please provide any additional information below.
I downgraded app&data using Titanium Backup and it works again. But I would be
really interested to have version 2.0.8, because it has a feature, that makes
sudden disconnects of Bluetooth in the Car go away (often the Bluetooth
disconnects from Car Hands Free and disables Car Mode when you drive with your
car next to a WIFI network where the phone tries to connect to. This is
annoying and seems a similar bug to the A2DP problems when WiFi is on)
Original issue reported on code.google.com by uwe.h.schindler
on 13 Jul 2011 at 9:35
Device (phone) brand: Motorola
Device (phone) model: Droid 3
Android OS version: 2.3.4
2.0.8 app
The link is not correct for these devices. The Droid 3 has an internal SD
card, and an external SD card. I tried both internal storage and SD card
storage. The link is created, as is the file. However, the link does not open
the file for some reason.
The widget and the location button on the main screen work fine.
Original issue reported on code.google.com by [email protected]
on 14 Jul 2011 at 2:56
If you use the database import feature to import a database from the SD card,
you will need to exit and restart the application for the new data to be
available. In fact, if you try to find devices the app will force close. When
this happens, just open the app again and everything works fine. I just need
to figure out how to reinit the database when I replace the file.
The impact of this is actually very low since importing the database is not
done often at all. I only created it because I had a bug when I was adding a
column to the database for the location capture configuration and lost all my
data.
Original issue reported on code.google.com by [email protected]
on 29 Oct 2010 at 3:08
Right now the program captures the most recent and best locations. However,
that is only as good as the last location request. So, if you don't have
another program requesting a location (such as maps, navigation, etc) then your
location is not very good. The program works fine if you have maps or
navigation (or any other program that request locations often).
To fix this I just need to implement a listener that requests location updates
quickly and returns when the location is within some tolerance (say 10m) OR a
timer has expired. The deregister the listener.
Original issue reported on code.google.com by [email protected]
on 10 Oct 2010 at 3:28
First: this is great ... (almost) exactly what I wanted. I am using this with a
headset. Would be nice if there were a setting to allow the connected icon to
be a headset. As for me, a global setting would be fine; a more elaborate
implementation could allow selection per device.
The almost? Any chance you could add a "built-in" device ... the headset being
plugged in or unplugged (obviously the location save is not too useful for this
...). Yes there is another app for this in the market (Hearing Saver); but it
also needs to have the service running with a notification icon and there is so
little room in the space.
Original issue reported on code.google.com by [email protected]
on 8 Feb 2011 at 8:09
The location link in the app and widget always uses the most recent location.
Instead it should usee the most accurate that was captured after a disconnect.
I had a case where a very accurate gps location was superceeded by a network
location.
Original issue reported on code.google.com by [email protected]
on 13 May 2011 at 12:45
Device (phone) brand:nexus one
Device (phone) model:
Android OS version:
App version: A2.1 or main
What steps will reproduce the problem?
Would it be possible to sync Bluetooth headset volume controles with device
controls.
Original issue reported on code.google.com by [email protected]
on 17 Jan 2011 at 7:53
The up/down buttons are not clear what they do.
Original issue reported on code.google.com by [email protected]
on 26 Oct 2010 at 10:43
This came from the developer console. The very first error report. The
problem was the service was not handling the case where there was no prior
location captured the first time a location was attempted to be captured.
Original issue reported on code.google.com by [email protected]
on 12 Nov 2010 at 3:13
Device (phone) brand: Motorola
Device (phone) model: Droid3
Android OS version: 2.3.4
A2DP Volume 2.0.9
What steps will reproduce the problem?
1. Pair device and turn Bluetooth ON
2. Find a file and send it to a PC using Bluetooth
This is likely related to the broadcast receiver seeing an unknown Bluetooth
device. However, in this case the device was in the list the 2nd time I tried.
There has been a problem with the broadcast receiver ever since 2.0.8.
Original issue reported on code.google.com by [email protected]
on 24 Jul 2011 at 7:28
Device (phone) brand: HTC
Device (phone) model: WILDFIRE
Android OS version: 2.2
App version: main
Hi, I found your app useful to fix an annoying problem I have with my HTC
Wildfire. Every time I disconnect from my bluetooth hands-free kit, the in-call
volume of the phone becomes too loud although the bar is set to its minimum
level. With your app installed and the service on, it seems the problem does
not happen.
Can you comment on this?
Original issue reported on code.google.com by [email protected]
on 21 Jan 2011 at 9:09
[deleted issue]
When Cort installed the last V1.0 of the software it force closed when he
started the service. Happened repeatedly. After he opened the preferences and
configured a few things it worked fine. His Droid has Sapphire OS. However,
we also tried it on another Sapphire phone at the same time and it worked fine.
Original issue reported on code.google.com by [email protected]
on 27 Oct 2010 at 1:55
Some of your bluetooth devices may not be installed in a car so you don't want
to capture the location of them. Add a configuration per device to handle
this. You can also use this to trigger a location capture for any bluetooth
device.
Original issue reported on code.google.com by [email protected]
on 27 Oct 2010 at 2:19
Integrate with Amazon MP3 player, similar to the Pandora integration. Have it
start Amazon MP3 and start playing a play list or play all.
Original issue reported on code.google.com by [email protected]
on 24 Jul 2011 at 11:46
The manage data export functions fail. Export to DB reports fail. Export to
XML force close.
Original issue reported on code.google.com by [email protected]
on 18 Oct 2010 at 10:07
A declarative, efficient, and flexible JavaScript library for building user interfaces.
๐ Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
An Open Source Machine Learning Framework for Everyone
The Web framework for perfectionists with deadlines.
A PHP framework for web artisans
Bring data to life with SVG, Canvas and HTML. ๐๐๐
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
Some thing interesting about web. New door for the world.
A server is a program made to process requests and deliver data to clients.
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
Some thing interesting about visualization, use data art
Some thing interesting about game, make everyone happy.
We are working to build community through open source technology. NB: members must have two-factor auth.
Open source projects and samples from Microsoft.
Google โค๏ธ Open Source for everyone.
Alibaba Open Source for everyone
Data-Driven Documents codes.
China tencent open source team.