A GoLang tool to enumerate and abuse LDAP. Made simple.
Ldapper was created with for use in offensive security engagements for targeted user enumeration, group enumeration, and more. Ldapper uses familiar "net" commands such as "net user" and "net group" to perform all its queries and its output follows the same conventions. Ldapper's user interface operates as a pseudo-interactive shell, where the user can input commands until exited. All traffic goes over the LDAP(S) protocol with a singular bind to help you better blend into the network.
Ldapper is proxy aware and supports NTLM authentication with a user's hash. Additionally, this tool can perform modification actions within LDAP. More functionality is planned for later releases, but for now additional supported command functions are:
- Add Domain Computers
- Add/Remove Arbitrary SPNs
- Kerberoast
This tool should be considered in its beta stages. Please report any bugs, issues, or functionality ideas for future releases.
Ldapper can be built and ran using the following commands inside of the repository folder:
go mod tidy - pull down all necessary dependencies
go build - build Ldapper
./ldapper - run Ldapper
./ldapper -h
__ ____ __ ____ ____ ____ ____
( ) ( \ / _\ ( _ \( _ \( __)( _ \
/ (_/\ ) D (/ \ ) __/ ) __/ ) _) ) /
\____/(____/\_/\_/(__) (__) (____)(__\_)
@SpaceManMitch96
@Synzack21
Usage of ./ldapper:
-H string
Use NTLM authentication
-dc string
IP address or FQDN of target DC
-h Display help menu
-o string
Log file
-p string
Password
-k Use Kerberos authentication
-s Bind using LDAPS
-socks4 string
SOCKS4 Proxy Address (ip:port)
-socks4a string
SOCKS4A Proxy Address (ip:port)
-socks5 string
SOCKS5 Proxy Address (ip:port)
-u string
Username (username@domain)
Examples:
With Password: ./ldapper -u <username@domain> -p <password> -dc <ip/FQDN> -s
With Hash: ./ldapper -u <username@domain> -H <hash> -dc <ip/FQDN> -s
With Kerberos: ./ldapper -u <username@domain> -k -dc <ip/FQDN> -s
Ldapper supports the ability to bind to LDAP using either unencrypted LDAP on port 389 (default) or encrypted LDAPS on port 636 with the flag -s. Some of the command modules, such as adding a domain computer require using LDAPS. LDAPS is always recommended for OPSEC purposes.
Ldapper can be used with a username and password. This is the most common method of authentication. The username format follows the below covention:
> ./ldapper -u '[email protected]' -P "Password123!" -dc 10.10.10.101 -s
Ldapper can also authenticate with a user's NTLM hash. This method can be used with the -H flag.
> ./ldapper -u '[email protected]' -H OOGNKVJB2TRCYLD26H4DVPF3KBP0SG03 -dc 10.10.10.101 -s
Ldapper can also authenticate using a CCache file specefied in the KRB5CCNAME enviroment variable with the -k flag.
> ./ldapper -u '[email protected]' -k -dc 10.10.10.101 -s
The net module follows the same structure as the traditional Windows net module. Currently the following commands are supported:
net user <user>net group <group>net nestedGroups <group>
The command net user will information on a specified user in the domain, minus group memberships (see "Groups" module). The command net group will return a list of users that are members of the specified group. The net nestedGroups query acts similarly to the "net group" query, but searches recursively for all nested users and groups.
*Note that the output in the "group" queries will return the "(Group)" label to distinguish users and groups. This is not part of the group name. Additionally, any groups with spaces in them will be wrapped in single quotes.
> net user hanzo
User Information - hanzo:
-------------------------------------------------------------------------------
User Name: hanzo
Full Name: Hanzo Shimada
Comment: Test Description
User Account Control: Enabled, Password Doesn't Expire
(If Enabled, Check Last Lockout Time)
Last Lockout Time:
Account Expires: Never
Password Last Set: 02/21/2021 03:33:12 PM
Home Directory: C:\Users\Home\Hanzo
Last logon: 07/06/2022 03:40:39 PM
Mail: [email protected]
> net group domain admins
Primary Group Members
-------------------------------------------------------------------------------
NestedHighPriv (Group) jkaplan SQLService
Key Admins (Group) Administrator
> net nestedGroups domain admins
Primary Group Members
-------------------------------------------------------------------------------
CLAUDINE_CARSON MERRILL_HODGES JESSIE_MAXWELL
NestedHighPriv (Group) jkaplan SQLService
Key Admins (Group) Administrator
Nested Group Members
-------------------------------------------------------------------------------
pharah NestedDA DoubleNested (Group)
DoubleNestedDA RANDOLPH_WISE HORACE_MONTGOMERY
DELMAR_MERRILL THURMAN_HENDRICKS SILAS_PRUITT
NORMAND_MULLINS DORIS_PICKETT NEWTON_HALL
DEMETRIUS_BRENNAN MADELINE_SINGLETON SHERRY_RIVAS
* Note: nested group queries will likely result in an expensive LDAP query, these are LDAP searches that visit a large number of entries. The default threshold for an expensive search is 10,000 entries.
The groups module pulls the group memberships for an individual user. The syntax is as follows:
groups <targetUser>
> groups hanzo
Group Memberships - hanzo:
-------------------------------------------------------------------------------
GA-gor-distlist1 BE-1415ACUAT-distlist1 TestGroup2
TestGroup
The getspns module pulls all domain users with an SPN set. Syntax is as follows:
getspns
> getspns
SPN Username PasswordLastSet LastLogon Delegation
CIFS/AZRWAPPS1000002 LIDIA_ELLIOTT 2022-07-24 21:07:52 -0400 EDT 2022-07-24 21:08:17 -0400 EDT unconstrained
CIFS/AZRWLPT1000000 HOUSTON_MCBRIDE 2022-07-24 21:05:43 -0400 EDT 2022-07-24 21:06:15 -0400 EDT constrained
CIFS/ESMWLPT1000000 DOLLY_MCLEAN 2022-07-15 00:38:54 -0400 EDT <never>
This module queries for the machine account quota of the domain. Syntax is as follows:
mquota
> mquota
Machine Account Quota: 10
This module queries for the password policy for the domain. Syntax is as follows:
passpol
> passpol
Minimum Password Length: 8
Password History Length: 24
Lockout Threshold: 5
Lockout Duration: 30 minutes
Minimum Password Age: 1 day(s)
Maximum Password Age: 42 day(s)
Password Complexity: DOMAIN_PASSWORD_COMPLEX
This module queries for abusable ACES within a target object's DACL. Syntax is as follows:
-dacl <target object>
> dacl administrator
GENERIC_ALL:
System (Local System)
GENERIC_WRITE:
Domain Admins
Enterprise Admins
Administrators
System (Local System)
WRITE_OWNER:
Domain Admins
Enterprise Admins
Administrators
System (Local System)
WRITE_DACL:
Domain Admins
Enterprise Admins
Administrators
System (Local System)
FORCE_CHANGE_PASSWORD:
ADD_MEMBER:
This module allows a user with the appropriate permissions to add a domain computer account to LDAP with a randomized 15 character alphanumeric password. This can be paired with the default machine account quota of 10, where any user can add up to 10 machine accounts.
> addComputer ldapper$
Successfully created computer account "ldapper$" with password "mT4lyPn6fh3T8XH"
This module allows the addition of an arbitrary SPN to the target user. This requires write permissions over the target user account. Syntax is as follows:
spn add <targetUser> <spn value>spn delete <targetUser> <spn value>
> spn add hanzo blah/blah
Successfully added SPN: "blah/blah" for user "hanzo"
> spn delete hanzo blah/blah
Successfully deleted SPN: "blah/blah" for user "hanzo"
The roast module will request and print the service ticket encrypted with the users password. Syntax is as follows:
roast <user>
> roast LIDIA_ELLIOT
$krb5tgs$23$*LIDIA_ELLIOT$RANGE.COM$LIDIA_ELLIOT*$31d99685e614b96bb9fab3a534f3a68d$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
*Note: This does not use the LDAP(S) protocol.
Currently, Ldapper supports logging of stdout to a specified log file. This can be called using the -o flag. The log file will be created in the current directory. If the log file already exists, it will be appended to.
./ldapper -u [email protected] -P "Password123!" -dc 10.10.10.101 -s -o ldapper.log
Ldapper supports all SOCKS4, SOCKS4A, and SOCKS5 proxies. The proxy can be specified with the -socks4, -socks4a, and -socks5 flags respectively. Proxy functionality is compatible with C2 frameworks such as Cobalt Strike.
./ldapper -u [email protected] -P "Password123!" -dc 10.10.10.101 -socks4 127.0.0.1:6666 -s
__ ____ __ ____ ____ ____ ____
( ) ( \ / _\ ( _ \( _ \( __)( _ \
/ (_/\ ) D (/ \ ) __/ ) __/ ) _) ) /
\____/(____/\_/\_/(__) (__) (____)(__\_)
@SpaceManMitch96
@Synzack21
Connecting with proxy: 127.0.0.1:6666
Bind successful, dropping into shell.
>
React
Typescript
Django
Laravel
Facebook
Microsoft
Google
Alibaba
D3
Tencent