This is a cookbook for managing RabbitMQ with Chef. It is intended for RabbitMQ 2.6.1 or later releases. With Chef we have adopted support >= 11.14.0 for chef-client, and leaning heavily on chef-client 12 and above.
This cookbook depends on the erlang cookbook.
The release was tested with (rabbitmq.com/distro version), from the kitchen.yml.
- CentOS 6.5
- CentOS 7.0
- Ubuntu 12.04
- Ubuntu 14.04
- Debian 7.0
Installs rabbitmq-server
from RabbitMQ.com via direct download of the installation package or using the distribution version. Depending on your distribution, the provided version may be quite old so they are disabled by default. If you want to use the distro version, set the attribute ['rabbitmq']['use_distro_version']
to true
. You may override the download URL attribute ['rabbitmq']['package']
if you wish to use a local mirror.
The cluster recipe is now combined with the default and will now auto-cluster. Set the ['rabbitmq']['clustering']['enabled']
attribute to true
, ['rabbitmq']['clustering']['cluster_disk_nodes']
array of node@host
strings that describe which you want to be disk nodes and then set an alphanumeric string for the erlang_cookie
.
To enable SSL turn ssl
to true
and set the paths to your cacert, cert and key files.
node['rabbitmq']['ssl'] = true
node['rabbitmq']['ssl_cacert'] = '/path/to/cacert.pem'
node['rabbitmq']['ssl_cert'] = '/path/to/cert.pem'
node['rabbitmq']['ssl_key'] = '/path/to/key.pem'
A full list of SSL attributes can be found in attributes/default.rb.
Default values and usage information of important attributes are shown below. More attributes are documented in metadata.rb.
The default username and password are guest/guest:
['rabbitmq']['default_user'] = 'guest'
['rabbitmq']['default_pass'] = 'guest'
By default, the guest user can only connect via localhost. This is the behavior of RabbitMQ when the loopback_users configuration is not specified in it's configuration file. Also, by default, this cookbook does not specify loopback_users in the configuration file:
['rabbitmq']['loopback_users'] = nil
If you wish to allow the default guest user to connect remotely, you can change this to []
. If instead you wanted to allow just the user 'foo' to connect over loopback, you would set this value to ["foo"]
. More information can be found here: https://www.rabbitmq.com/access-control.html.
Installs the rabbitmq_management
and rabbitmq_management_visualiser
plugins.
To use https connection to management console, turn ['rabbitmq']['web_console_ssl']
to true. The SSL port for web management console can be configured by setting attribute ['rabbitmq']['web_console_ssl_port']
, whose default value is 15671.
Enables any plugins listed in the node['rabbitmq']['enabled_plugins']
and disables any listed in node['rabbitmq']['disabled_plugins']
attributes.
Downloads, installs and enables pre-built community plugins binaries.
To specify a plugin, set the attribute node['rabbitmq']['community_plugins']['PLUGIN_NAME']
to 'DOWNLOAD_URL'
. For example, to use the RabbitMQ priority queue plugin, set the attribute node['rabbitmq']['community_plugins']['rabbitmq_priority_queue']
to 'https://www.rabbitmq.com/community-plugins/v3.4.x/rabbitmq_priority_queue-3.4.x-3431dc1e.ez'
.
Enables any policies listed in the node['rabbitmq']['policies']
and disables any listed in node['rabbitmq']['disabled_policies']
attributes.
Enables any users listed in the node['rabbitmq']['enabled_users']
and disables any listed in node['rabbitmq']['disabled_users']
attributes.
You can provide user credentials, the vhosts that they need to have access to and the permissions that should be allocated to each user.
node['rabbitmq']['enabled_users'] = [
{
:name => 'kitten',
:password => 'kitten',
:tag => 'leader',
:rights => [
{
:vhost => ['/', 'nova'],
:conf => '.*',
:write => '.*',
:read => '.*'
}
]
}
]
Enables any vhosts listed in the node['rabbitmq']['virtualhosts']
and disables any listed in node['rabbitmq']['disabled_virtualhosts']
attributes.
Configure the cluster between the nodes in the node['rabbitmq']['clustering']['cluster_nodes']
attribute. It also, supports the auto or manual clustering.
- Auto clustering : Use auto-configuration of RabbitMQ, http://www.rabbitmq.com/clustering.html#auto-config
- Manual clustering : Configure the cluster by executing
rabbitmqctl join_cluster
command.
node['rabbitmq']['clustering']['enable']
: Default decision flag of clusteringnode['rabbitmq']['erlang_cookie']
: Same erlang cookie is required for the clusternode['rabbitmq']['clustering']['use_auto_clustering']
: Default is false. (manual clustering is default)node['rabbitmq']['clustering']['cluster_name']
: Name of cluster. default value is nil. In case of nil or '' is set forcluster_name
, first node name innode['rabbitmq']['clustering']['cluster_nodes']
attribute will be set for manual clustering. for the auto clustering, one of the node name will be set.node['rabbitmq']['clustering']['cluster_nodes']
: List of cluster nodes. it required node name and cluster node type. please refer to example in below.
Attributes example
node['rabbitmq']['clustering']['enable'] = true
node['rabbitmq']['erlang_cookie'] = 'AnyAlphaNumericStringWillDo'
node['rabbitmq']['clustering']['cluster_partition_handling'] = 'ignore'
node['rabbitmq']['clustering']['use_auto_clustering'] = false
node['rabbitmq']['clustering']['cluster_name'] = 'seoul_tokyo_newyork'
node['rabbitmq']['clustering']['cluster_nodes'] = [
{
:name => 'rabbit@rabbit1',
:type => 'disc'
},
{
:name => 'rabbit@rabbit2',
:type => 'ram'
},
{
:name => 'rabbit@rabbit3',
:type => 'disc'
}
]
There are 5 LWRPs for interacting with RabbitMQ.
Enables or disables a rabbitmq plugin. Plugins are not supported for releases prior to 2.7.0.
:enable
enables aplugin
:disable
disables aplugin
rabbitmq_plugin "rabbitmq_stomp" do
action :enable
end
rabbitmq_plugin "rabbitmq_shovel" do
action :disable
end
sets or clears a rabbitmq policy.
:set
sets apolicy
:clear
clears apolicy
:list
listspolicy
s
rabbitmq_policy "ha-all" do
pattern "^(?!amq\\.).*"
params ({"ha-mode"=>"all"})
priority 1
action :set
end
rabbitmq_policy "ha-all" do
action :clear
end
Adds and deletes users, fairly simplistic permissions management.
:add
adds auser
with apassword
:delete
deletes auser
:set_permissions
sets thepermissions
for auser
,vhost
is optional:clear_permissions
clears the permissions for auser
:set_tags
set the tags on a user:clear_tags
clear any tags on a user:change_password
set thepassword
for auser
rabbitmq_user "guest" do
action :delete
end
rabbitmq_user "nova" do
password "sekret"
action :add
end
rabbitmq_user "nova" do
vhost "/nova"
permissions ".* .* .*"
action :set_permissions
end
rabbitmq_user "joe" do
tag "admin,lead"
action :set_tags
end
Adds and deletes vhosts.
:add
adds avhost
:delete
deletes avhost
rabbitmq_vhost "/nova" do
action :add
end
Join cluster, set cluster name and change cluster node type.
-
:join
join in cluster as a manual clustering. node will join in first node of json string data. -
cluster nodes data json format : Data should have all the cluster nodes information.
[
{
"name" : "rabbit@rabbit1",
"type" : "disc"
},
{
"name" : "rabbit@rabbit2",
"type" : "ram"
},
{
"name" "rabbit@rabbit3",
"type" : "disc"
}
]
:set_cluster_name
set the cluster name.:change_cluster_node_type
change cluster type of node.disc
orram
should be set.
rabbitmq_cluster '[{"name":"rabbit@rabbit1","type":"disc"},{"name":"rabbit@rabbit2","type":"ram"},{"name":"rabbit@rabbit3","type":"disc"}]' do
action :join
end
rabbitmq_cluster '[{"name":"rabbit@rabbit1","type":"disc"},{"name":"rabbit@rabbit2","type":"ram"},{"name":"rabbit@rabbit3","type":"disc"}]' do
cluster_name 'seoul_tokyo_newyork'
action :set_cluster_name
end
rabbitmq_cluster '[{"name":"rabbit@rabbit1","type":"disc"},{"name":"rabbit@rabbit2","type":"ram"},{"name":"rabbit@rabbit3","type":"disc"}]' do
action :change_cluster_node_type
end
For an already running cluster, these actions still require manual intervention:
- changing the :erlang_cookie
- turning :cluster from true to false
- Author:: Benjamin Black ([email protected])
- Author:: Daniel DeLeo ([email protected])
- Author:: Matt Ray ([email protected])
- Author:: Seth Thomas ([email protected])
- Author:: JJ Asghar ([email protected])
Copyright (c) 2009-2015, Chef Software, Inc.
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.