This is a fork of https://github.com/ooyala/quagga-cookbook. The functionality here is much different, and this cookbook is not backwards comptaible.

This cookbook provides an interface via attributes to serveral Quagga daemons. It's written with the intention of deploying Quagga on Cumulus switches, and managing router configuration as code.

This cookbook currently supports the following daemons:

• BGP
• OSPF
• Zebra

Tested on:

• Cumulus Linux 1.5.3
• Ubuntu 14.04

NOTE! Where you see "String or Array" for type, a String may be used only for single values. Use an Array of Strings for multiple values.

Simply set the desired attributes (see Attributes section above) then call the proper recipe (quagga::bgpd, quagga::ospfd). There is also a provider for zebra, but no recipe as of yet.

The following example will create BGP process 64512 with dynamic neighbors. Devices in the 10.0.0.0/8 range ('hosts' peer-group) will be able to peer with this process. A regular neighbor 192.168.52.1 is configured here also. Neighbors in the group and the normal neighbor will receive a default route when peered with this instance.

node.set[:quagga][:bgp]['64512'][:log_neighbor_changes] = true
node.set[:quagga][:bgp]['64512'][:neighbors]['hosts'][:remote_as] = 64512
node.set[:quagga][:bgp]['64512'][:neighbors]['hosts'][:default_originate] = true
node.set[:quagga][:bgp]['64512'][:neighbors]['hosts'][:peer_group] = true
node.set[:quagga][:bgp]['64512'][:neighbors]['hosts'][:peer_group_range] = '10.0.0.0/8'
node.set[:quagga][:bgp]['64512'][:neighbors]['192.168.52.1'][:remote_as] = 64512
node.set[:quagga][:bgp]['64512'][:neighbors]['192.168.52.1'][:default_originate] = true

include_recipe 'quagga::bgpd'

The following example will create an OSPF area 0, with quagga reload enabled and an OSPF-specific router-id. All interfaces with addresses in 10.0.0.0/8 will actively participate in OSPF, except for the ones explicitly listed as :passive_ints.

node.set[:quagga][:integrated_vtysh_config] = true
node.set[:quagga][:ospf][:router-id] = 10.0.0.1
node.set[:quagga][:ospf][:passive_default] = false
node.set[:quagga][:ospf][:areas][0.0.0.0][:networks] = '10.0.0.0/8'
node.set[:quagga][:ospf][:passive_ints] = ['lo', 'br-access']

include_recipe 'quagga::ospfd'

The following example will create a static route to 10.0.0.0/24 using the next hop of 172.16.1.1

node.set[:quagga][:static_routes]['10.0.0.0/24'] = '172.16.1.1'

include_recipe 'quagga::zebra'

The following example will create a routing table with a static route, a bgp neighbor and a specific interface all on table 100.

node.set[:quagga][:multiple_instance] = true
node.set[:quagga][:interfaces]['swp1 table 100'] = []
node.set[:quagga][:bgp]['64512 table 100'][:neighbors]['1.1.1.1'][:remote_as] = 64512
node.set[:quagga][:static_routes]['10.0.0.0/24'] = '172.16.1.1 table 100'

Any form of contribution is welcome! Feature requests, bug reports, pull requests, whatever! If you add features, make sure there are tests for them, and if you change any code, make sure the existing tests all pass before creating a pull request.

Tests are run on a Cumulus VX VM using serverspec.

Testing requirements:

• Vagrant
• VirtualBox

To run the tests (after installing prerequisites):

• bundle install
• rake rubocop
• rake test
• foodcritic .

Copyright 2014, Ooyala Inc.
Copyright 2015, Contributers

Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. You may obtain a copy of the License at

http://www.apache.org/licenses/LICENSE-2.0

Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License.