Simulate touch,drag,pinch for Android phone.

I put a pre compiled file in dist folder

About the usage:

1. use run.bat to push file to your phone.
2. open browser http://<phone ip addr>:21000

Support post js code to http://<phone ip addr>:21000/runjs

Example js code:

exec("input", "keyevent", "ENTER")
tap(20, 30, 100) // position: (20, 30), duration: 100ms
drag(10, 12, 50, 60, 10, 100) // start(10, 12), end(50, 60), steps: 10, duration: 100ms
// pinch(ax0, ay0, ax1, ay1, bx0, by0, bx1, by1, steps, duration)

Also support use adb to run js

adb shell /data/local/tmp/air-native -i /dev/input/event1 -runjs='tap(400, 400, 2000)'

• PNG has best quality and file is small, but compress use lot of time.
• BMP file is big, but donnot use compress time.
• JPG quality no good than PNG, but fast also very small.

Use screencap -p is very very slow, about 4~5s. but screencap is fast, only take about 500ms.

I develop the pngdiff lib https://github.com/codeskyblue/pngdiff. Diff is fast, only about 70ms. But encoding still take a lot of time(about 400ms). ^_|

So the total time is about 1s.

Still in develop, but the code is healthy.

This code need Go1.4, follow offical instruction to setup environment.

A lot code is from https://github.com/wlach/orangutan, orangutan you are a great people.

use sh build.sh to build.

Sample code is in main.go now.

Licence is under MIT.