jb8642 / prs-plus Goto Github PK
View Code? Open in Web Editor NEWAutomatically exported from code.google.com/p/prs-plus
Automatically exported from code.google.com/p/prs-plus
What steps will reproduce the problem?
Probably because this is a preview version, but:
There are a few lingering menu references for the calculator application, for
example when you assign a function to the volume buttons.
If it is assigned and then pressed it causes the reader to freeze requiring a
paperclip reset.
What version of the product are you using? On what operating system?
Device: PRS-600
Firmware: PRSP_600_2.0.3preview
Base image: PRSP_600_base_flasher_1.0_by_amutin
Original issue reported on code.google.com by [email protected]
on 2 Dec 2010 at 2:34
What steps will reproduce the problem?
1. follow the installation procedure (runme.bat)
What version of the product are you using? On what operating system?
prs-600 installed from a windows vista French
Please provide any additional information below.
I've followed the installation instructions. After 2 hours, it keeps displaying
that it is upgrating.
I the tried to stop, but the message didn't change.
If I'm doing a reset it display that the firmware update is incomplete. No way
to get out of it.
How can I resolve this problem???
Original issue reported on code.google.com by [email protected]
on 20 Nov 2010 at 5:53
What steps will reproduce the problem?
1. Set a standby background image which fills the screen when on vertical
orientation
2. Change the device orientation to horizontal
3. Put the device in standby
What is the expected output? What do you see instead?
The image should still fill the screen and have the same orientation as before;
instead it is rotated and rescaled, which is generally ugly.
Original issue reported on code.google.com by [email protected]
on 20 Nov 2010 at 10:01
Use Mark Nord's findings:
http://www.mobileread.com/forums/showpost.php?p=1194225&postcount=1432
Original issue reported on code.google.com by [email protected]
on 28 Nov 2010 at 10:48
What steps will reproduce the problem?
1. Switch on the reader
2. Leave it idle for a while
Expected result is that it would power off in about 5 mins. With PRS+ 1.1.3 it
doesn't. (unknown, if it worked with previous versions)
Original issue reported on code.google.com by [email protected]
on 22 Jun 2010 at 11:34
What steps will reproduce the problem?
1. Insert SD Card
2. Select English, continue, Install PRS+, Continue
What is the expected output? What do you see instead?
"Failed, check log for errors"
The log:
Copying tools to /tmp... OK
Saving BootImg...
!!!ERROR!!! Error in doExec: Failed to execute cat
/dev/mtdblock9 > /Data/1.2.00.18050.boot.1
Obviously enough I expected the installer to do something and report
success
What version of the product are you using? On what operating system?
From the "About to install PRS+" screen:
Sony Firmware: Installer-1.1.00.18040 eBook-1.2.00.18050
PRS+ Firmware: Installer-1.0.2 eBook-n/a
PRS+ Script: Installer-1.0.2 eBook-n/a
Please provide any additional information below.
I get the "Your firmware version is not supported. If you install PRS+,
your firmware will be overwritten with supported version. (backup will be
made, so that you could restore it later)" message due to odd firmware
version (obviously enough).
When attempting to do backup I get the same sans "Copying tools to /tmp...
OK".
Original issue reported on code.google.com by [email protected]
on 2 Apr 2010 at 8:11
Hi there,
Congrats on your awesome work (I'm using a PRS-600) =)
I've thought of suggesting/asking a few things:
1. Is there a documentation of the code, explaining the structure and so on?
I'd be glad to contribute a plugin, or so.
2. Would it be possible to modify the current PDF viewer to remember the zoom
parameter when moving to the previous/next page? I realize it would be pretty
hard, but it'd be awesome to have this (you know, on the prs 600 at least when
you zoom in and then go to prev/next page, it zooms out).
3. It would be great also to have a way to save bookmarks/notes =) No idea how
feasible this would be; I've tried browsing the prs storage, but couldn't
really figure how annotations are stored.
4. Do you have know how the database is built, and where it is stored? There
seem to be plenty of random XML files lying everywhere (I tried to browse
calibre source, but I'm no python specialist...)...
5. Does the CSS custom styles function fix the fact that PRS 600 sometimes
ignores the CSS "justify" attribute?
6. Would it be possible to change the default font used when opening .txt files
(the monospaced one drives me crazy)?
7. Is there a simulator of some kind for the PRS-600? (I guess not, but I'm
not sure, so I figured I'd ask).
Anyway, just questions and open suggestions =)
Thanks for your awesome work,
CFP.
Original issue reported on code.google.com by [email protected]
on 26 Nov 2010 at 6:49
Use calculator icon from here:
http://www.mobileread.com/forums/showpost.php?p=973129&postcount=1323
Original issue reported on code.google.com by [email protected]
on 20 Nov 2010 at 7:50
300 - * by author/title sorting doesn't work for non latin chars. (also affects
600)
Original issue reported on code.google.com by [email protected]
on 17 Oct 2010 at 10:37
User reported that BrowseFolders is not showing some books, even though they
are visible via Books By * menu.
Original issue reported on code.google.com by [email protected]
on 24 Oct 2010 at 11:57
What steps will reproduce the problem?
1. Install the base image
2. Go to More->Settings
3. Check text on the bottom right of the "Page Turn Gesture" option
What is the expected output? What do you see instead?
As far as I remember, it used to be an arrow pointing left or right depending
on the setting. Now it is a glyph-missing square
What version of the product are you using? On what operating system?
Device: PRS-600
Firmware: PRSP_600_2.0.3preview
Base image: PRSP_600_base_flasher_1.0_by_amutin
Please provide any additional information below.
Original issue reported on code.google.com by [email protected]
on 1 Dec 2010 at 10:24
As after installation a SD card should not be in the divice, it should be
better to add a note text after installation and before restart of the
device, that an SD card should be removed, to avoid starting an installer
anew.
Original issue reported on code.google.com by valgog
on 22 Mar 2010 at 9:30
Is there any possibility to improve the Epub support?
The biggest issues with it are (With PRS-300 and official firmware):
-No justification of right margin (sometimes even missing text)
-Page markers sometimes make collision with text, messing it up.
I understand this is not an actual issue of your custom firmware, just a
request. Thanks :)
Original issue reported on code.google.com by [email protected]
on 16 Jul 2010 at 6:45
http://www.mobileread.com/forums/showthread.php?t=64510&page=99#1480
when i try your chinese font,which you recommended me .i find it make my
battery time very short.just about 5hours.
Original issue reported on code.google.com by [email protected]
on 6 Dec 2010 at 10:25
300 - back/fordward history actions do not work. Next/prev page is fired
instead.
Original issue reported on code.google.com by [email protected]
on 17 Oct 2010 at 10:36
raverfas @ the-ebook.org reported her reader not going into auto standby.
Original issue reported on code.google.com by [email protected]
on 8 Nov 2010 at 5:05
Very minor problem. Instead of displaying the PRS+ version number on the About
page, it says instead: "PRS+ n/a"
It will be helpful, though, for knowing that an update has occurred
successfully.
Original issue reported on code.google.com by [email protected]
on 1 Dec 2010 at 9:06
Ok, one more. Thanks.
Translator: Àlex Castrillo
Original issue reported on code.google.com by [email protected]
on 9 Dec 2010 at 5:15
Attachments:
В системных сообщениях, требующих
подтверждения какой-либо операции
(дефолтные настройки, выключение,
форматирование памяти, удаление книги)
наблюдается две проблемы.
Во-первых, болтается какой-то паразитный
квадратик нераспознанного символа (нет
только в подверждении на удаление книги)
Во-вторых текст "съедается" (см. аттачи).
Предлагаю следующие варианты текстов:
Нажмите "закладка" для сброса настроек
Нажмите "закладка" для отключения
Нажмите "закладка" для форматирования
Нажмите "закладка" чтобы удалить книгу
Original issue reported on code.google.com by [email protected]
on 27 Nov 2010 at 10:55
Attachments:
It's possible to catch "wake up" event and update clock value.
Original issue reported on code.google.com by [email protected]
on 8 Nov 2010 at 5:04
What steps will reproduce the problem?
1. Delete media.xml in cache folder on the device
2. Turn the device off and back on
3. Connect to the device with Calibre 0.6.55 (latest)
4. Calibre will say that it cannot connect to the device (media.xml is not
present)
What version of the product are you using? On what operating system?
PRS+ 1.1.3, Win 7 Ultimate x64
Original issue reported on code.google.com by [email protected]
on 30 May 2010 at 6:24
Currently statusbar shows something like:
1083 / 1221 (88%)
reader has requested to add one more deicmal point.
Original request:
http://www.mobileread.com/forums/showpost.php?p=1190766&postcount=1428
Note:
"Please add one more decimal point" is anticipated. Solution should cover up
to (say) 5 decimal points. :)
Original issue reported on code.google.com by [email protected]
on 30 Oct 2010 at 6:31
There is typo in mainStorage.xml at line 95, it says 'undeifned' instead of
'undefined'
Regards,
Joop
Original issue reported on code.google.com by [email protected]
on 18 May 2010 at 8:02
First of all, many thanks and congratulations for your excellent work.
I have just one suggestion for prs-600. Is it possible to add an option to fix
the "zoom in" so that the zoom size is kept when going to other page in the
document? This option is already implemented in prs-650 and it would be very
useful for 600, specially for reading scientific pdfs.
Thank you very much
Original issue reported on code.google.com by [email protected]
on 10 Dec 2010 at 1:15
What steps will reproduce the problem?
1. Settings
2. PRS+ Settings
3. Clock
4. Clock Style
5. 12 hours
What is the expected output? What do you see instead?
"pm" is displayed instead of "am" for hours after midnight.
What version of the product are you using? On what operating system?
PRS+ 1.1.3 / Firmware 1.1.00.18040
Please provide any additional information below.
None
Original issue reported on code.google.com by pwaller%[email protected]
on 30 May 2010 at 11:26
http://www.mobileread.com/forums/showpost.php?p=1113564&postcount=1400
Original issue reported on code.google.com by [email protected]
on 28 Nov 2010 at 10:49
Add attached assets file.
Translator: Salvatore Ingala
Original issue reported on code.google.com by [email protected]
on 21 Nov 2010 at 11:19
Attachments:
Use Mark Nords patches.
Requested here:
http://www.the-ebook.org/forum/viewtopic.php?p=465368#465368
Original issue reported on code.google.com by [email protected]
on 13 Nov 2010 at 1:44
What steps will reproduce the problem?
1. Create a directory ("books") in the root ("/books")
2. Move books there
3. Set "Internal Memory Root Folder" to "/books" instead of "/"
4. Go to "Browse Folders"
What is the expected output?
When a book is selected, you should see the standard menu to start/continue
reading, start from beginning, bookmarks, etc.
What do you see instead?
Only one option: "rescan internal memory"
What version of the product are you using? On what operating system?
PRS+ 1.1.3
Original issue reported on code.google.com by [email protected]
on 11 Jun 2010 at 4:51
What steps will reproduce the problem?
1. Open a epub which contains greek accented text (for example:
http://www.gutenberg.org/ebooks/27668, or the attached one)
2. The file will open but most of the accented characters will be missing.
3. Oddly enough, in the main interface some accents do show up.
What is the expected output? What do you see instead?
Accented characters should appear normally, currently boxes/question marks
appear instead
What version of the product are you using? On what operating system?
Device: PRS-600
Firmware: PRSP_600_2.0.3preview
Base image: PRSP_600_base_flasher_1.0_by_amutin
Please provide any additional information below.
I am attaching a couple of screenshots demonstrating the problem, and a epub
containing all greek symbols and their unicode codes. Note that greek does not
have '?' as a question mark so if it pops up something is wrong.
I got the list of characters from here:
http://www.bible-researcher.com/greek-unicode.html but not all of them are used
in modern greek. The ones that are, are in the epub.
Original issue reported on code.google.com by [email protected]
on 2 Dec 2010 at 2:27
Attachments:
Have tried to install the newest version of prs-plus, haven't installed
any before, when press 4 to copy image from card i get an error message
which states
Sorry, this firmware version is not supported:
505.1.2.00.18050
Is there anyway i can get this to install.
Many Thanks
Original issue reported on code.google.com by [email protected]
on 4 Feb 2010 at 7:37
The video shows that you can add a picture that is displayed when you turn off
the device, but I can not find this function.
Original issue reported on code.google.com by [email protected]
on 17 Nov 2010 at 5:07
I tried to translate the file from Italian into Spanish. Hope that helps.
Original issue reported on code.google.com by [email protected]
on 8 Dec 2010 at 1:34
Hi,
first of all, a big thank you!
This is an enhancement request, but I am not able to change the issue type...
It would be nice, if there was an option in key bindings, to use the volume
buttons to move back and forth in the history of a book. I had this in my good
old prs505 and miss it terribly.
Thank you
Sven
Original issue reported on code.google.com by [email protected]
on 25 Nov 2010 at 9:55
When using the 12 hour display on the 300 it looks like the format is too long,
it'll display something like 08:...k.PM instead of the actual time. 24 hour
format works fine.
Also, I don't know if this is intentional, but the regular option to change the
clock format doesn't work, only the PRS+ options.
Original issue reported on code.google.com by [email protected]
on 14 Oct 2010 at 12:45
Add to all versions
Use code from here:
http://www.mobileread.com/forums/showpost.php?p=1261579&postcount=66
Original issue reported on code.google.com by [email protected]
on 10 Dec 2010 at 7:49
does it really support chinese?i tried it but,it doesn't work.just show some
rectangle on the screen.
i really hope it could support chinese.thank you
Original issue reported on code.google.com by [email protected]
on 4 Dec 2010 at 11:04
Bind default "hold numeric button" actions so that users can use numeric
buttons for both page forward/back & goto page.
Original issue reported on code.google.com by [email protected]
on 13 Nov 2010 at 1:47
Check Mark Nords port of Sudoku:
http://www.mobileread.com/forums/showpost.php?p=1221375&postcount=32
Original issue reported on code.google.com by [email protected]
on 21 Nov 2010 at 6:26
Is there by any chance this version could be fit for prs700?
thanks for the great work on prs+.
Original issue reported on code.google.com by [email protected]
on 1 Dec 2010 at 12:55
Between the functions of the volume buttons you can choose the function "calc"
...
When I use this function the device freezes and I have reset to use again
Is this function available?
So sorry if my english is bad, I speach spanish xP
Original issue reported on code.google.com by [email protected]
on 18 Nov 2010 at 2:23
See the subject.
Original issue reported on code.google.com by [email protected]
on 28 Nov 2010 at 8:19
Change courier font name to "Courier10 BT Roman" (as it was in the orignal
firmware).
Original issue reported on code.google.com by [email protected]
on 27 Nov 2010 at 7:37
Is posible this functions in the PRS+?
Original issue reported on code.google.com by [email protected]
on 17 Nov 2010 at 4:41
The asset file is attached to the following post:
http://www.mobileread.com/forums/showpost.php?p=1223462&postcount=1457
Original issue reported on code.google.com by [email protected]
on 20 Nov 2010 at 7:31
http://ebookapplications.com/
THere is a faster PDF reader for sony prs 505
Original issue reported on code.google.com by [email protected]
on 26 Jul 2010 at 12:19
What steps will reproduce the problem?
1. install 2.0.3preview on a prs 600
2. open a book with toc
3. open toc
What is the expected output? What do you see instead?
It should show me the chapter/headlines/..., instead it is just empty.
What version of the product are you using? On what operating system?
2.0.3preview
Original issue reported on code.google.com by [email protected]
on 26 Nov 2010 at 7:14
[Sony Touch 600]
I didn't want the "Browse Folders" icon on the main page of my Sony Touch 600,
but when I replaced it with one of the standard Sony icons, I discovered that
the "Browse Folders" icon does not appear in the "More Applications" list. Is
it possible that it be added to the "More Applications" menu in this situation?
Actually, this will be true of all the PRS+ additional application icons: Book
History, and in the future, Calculator, Games, etc... If they are not on the
main page, they should appear in the "More Applications" menu.
By the way, thanks for greatly improving the Sony Touch interface!
Original issue reported on code.google.com by [email protected]
on 26 Nov 2010 at 7:38
as summary.
Thanks.
Original issue reported on code.google.com by puke7456
on 9 Sep 2010 at 3:17
Subject sums it up
Original issue reported on code.google.com by [email protected]
on 19 Nov 2010 at 7:53
A declarative, efficient, and flexible JavaScript library for building user interfaces.
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
An Open Source Machine Learning Framework for Everyone
The Web framework for perfectionists with deadlines.
A PHP framework for web artisans
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
Some thing interesting about web. New door for the world.
A server is a program made to process requests and deliver data to clients.
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
Some thing interesting about visualization, use data art
Some thing interesting about game, make everyone happy.
We are working to build community through open source technology. NB: members must have two-factor auth.
Open source projects and samples from Microsoft.
Google ❤️ Open Source for everyone.
Alibaba Open Source for everyone
Data-Driven Documents codes.
China tencent open source team.