ivop / vs1053-waveblaster Goto Github PK

By using a vs1053/vs8053, we present to you an ideal, low-cost, easy to solder, some what compact and open source WaveBlaster module.

Introducing VLSi SynthRoarer.

*Support General Midi with 128 GM1 instruments 61 GM2 Bank 0 precussion sounds up to 64 notes polyphony and stereo output @48Khz 16bit

Here is a sample from chip manufacture.

http://www.vlsi.fi/fileadmin/software/VS10XX/vs1053mid.mp3

It's been tested on a old ESS 688 audiodrive sound card.

REV B and REV A is in gergber/old stable.7z

REV C IS BASICALLY REV B,their schematic is the same.

REV A = vs1053-waveblaster

REV C = vs1053-waveblaster-se

Here's a view of it been fully assembled and not been. (It says REV C, but it's actually REV B).

*Look,it is working on my soundcard.

*a. It is your choice to use crystal or oscillator.

*b. Both vs8053 and vs1053 can be used. There're no diffience in the MIDI implementation. Just buy the cheapest one.

*All values are printed on the silkscreen.

Check out another waveblaster project: https://github.com/ivop/cs9236-waveblaster

1.Fully SMT-ized?(Maybe REV D?)

2.Get a proper logo?(Maybe REV D?)

3.Write a bom list?(How about right now!)

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.