• Bitrate set to 2Mbps
• Use H264 baseline profile
• Use 2 second keyframes
• Insert PPS/SPS headers
• IP Address is statically set to 192.168.1.3
• Video is available at rtsp://192.168.1.3:8554/
• Username is pi and password is raspberry
• Download 2017-08-15-eclipse-pi.img.gz (1.2GB)

• Added automatic recording on startup (meaning you don't have to go into the crontab to start the process of recording in 10 minute chunks)
• Will be the last release for the eclipse
• Expands files size to fit card on first run.
• Video is available at 'rtsp://192.168.1.3:8554/'
• Username is pi and password is raspberry
• Download from google Drive '2017-08-01.img.tar.gz'

• Added automatic on-device recording script
• Proper video orientation
• IP Address is statically set to 192.168.1.3
• Video is available at rtsp://192.168.1.3:8554/
• Username is pi and password is raspberry
• Download 2017-06-07-eclipse-pi.img.gz (1.0GB)

• Added option for using one servo vs one
• IP Address is statically set to 192.168.1.3
• Video is available at rtsp://192.168.1.3:8554/
• Username is pi and password is raspberry
• Download 2017-05-01-eclipse-pi.img.gz (859MB)

• Optional DS-3231 RTC support
  • i2c-rtc,ds3231 dtoverlay added to /boot/config.txt
  • fake-hwclock and ntp packages removed by default
  • systemd unit hwclock-save stopped and disabled by default
  • NOTE: Without an RTC connected, time will default to 1970s - even if the Pi is connected to the internet.
• Locale switched from en_GB.UTF-8 to en_US.UTF-8
• Included extra network interface configs
  • /etc/network/interfaces.static (default)
  • /etc/network/interfaces.dhcp
• IP Address is statically set to 192.168.1.3
• Video is available at rtsp://192.168.1.3:8554/
• Username is pi and password is raspberry
• Download 2017-04-21-eclipse-pi.img.gz (797MB)

• Included octaplexer.py and related python system dependencies
• SSHD is now enabled on initial boot
• First pass at command/control HTTPD daemon
• Default RTSP stream changed from 1080P (1920x1280) at 3Mbps to 720P (1280x720) at 4.5Mbps
• IP Address is statically set to 192.168.1.3
• Video is available at rtsp://192.168.1.3:8554/
• Username is pi and password is raspberry
• Download 2017-04-14-eclipse-pi.img.gz (842MB)

• Initial release
• IP Address is statically set to 192.168.1.3
• Video is available at rtsp://192.168.1.3:8554/
• Username is pi and password is raspberry
• Download 2017-04-11-eclipse-pi.img.gz (780MB)

The Eclipse Pi image was created from a vanilla Raspbian Jessie Lite image overlayed with these filesystem modifications.