View Code? Open in Web Editor
NEW
Easy LoRa Gateway v2.1 is an easy-to-use and PRODUCTION LoRa Gateway for home users and small businesses. This gateway will use an ESP32 with Semtech LoRa SX1278 module Ra-02/RFM95W
License: Other
easyloragateway_v2.1's People
Contributors
easyloragateway_v2.1's Issues
task_wdt: Task watchdog got triggered. The following tasks did not reset the watchdog in time:
To delay polling for RPC_TIMEOUT ms when receiving a RPC commands.
This is to prioritize RPC traffic and mitigate RPC loss due to LoRa loss.
To alert when a RPC request is timeout without response
Related to #1
Is it like TTN gateway which transmit the data to cloud platform?
Retransmiting LoRa packet based on QoS
QoS 0: At most 1. For telemetry upload
QoS 1: At least one. Not implemented. Pending useful use case.
QoS 2: Exact one. For RPC command
If a gateway receives a weak signal (low RSSI < xxx dBm), the gateway will replay the packets again for nearby gateway.
Or to have fwd_id in the packet to route the packet to the wanted gateway.
To use MQTT subscription to trigger OTA for gateway.
Set attribute to issue OTA command
Uploaded firmware is uploaded in server?
Make transmitted message shorter for faster speed and higher reliability
Between gateways and nodes
To load default configuration from flash
To save configs to flash
To load configuration when click reset button.
To have time schedulers for gateway
Date and time schedulers
Repeat schedulers
To track for RPC commands and re-transmit if needed.
To add AES encryption/decryption to protect LoRa messages