Arduino-CMake is a framework which allows developers to write Arduino-based programs using any tool that supports cmake. Arduino-based? There are many other frameworks out there built upon Arduino's base, such as ESP32, and we respect that (Note that it doesn't mean we support it yet).
In other words, developers can use their favorite IDEs or text editors on their favorite OS to develop Arduino programs!
Wait - Hasn't it been possible all this time? Apparently not. You can read more about it in the Motivation section.
Arduino-CMake should1 do almost2 anything that the Arduino IDE does!
Here's a list of features already supported by Arduino-CMake:
- Creating Arduino "Executables"/Programs
- Uploading programs to hardware boards
- Adding/Finding and using Arduino Libraries
- 3rd Party libraries are fully supported
- User libraries which are not Arduino Libraries are also supported
- Using Arduino example programs
- Using Arduino library example programs
- Attaching Arduino sketches (
.ino
files) to programs
Moreover, Arduino-CMake allows some things that Arduino IDE doesn't:
- Developing Arduino programs in any IDE or text editor
- Completely customizing the build process per user's requirements
What's not supported?
- 3rd Party Platforms such as ESP32, Pinoccio, etc.
- Programmers and advanced bootloaders
- Serial connection (e.g. for monitoring)
It's also worth mentioning that Arduino-CMake is cross platform and works out-of-the-box on every OS that support CMake and Arduino.
1 The framework is still a WIP, meaning there are some missing features. ↩
2 The Arduino IDE supports several concepts which make writing code easier but are completely unprofessional. Our framework is not willing to encourage such poor coding standards, and thus doesn't support them. These will be mentioned throughout the documentation. ↩
A very basic example of how Arduino-CMake can be used is listed below:
# Define CMake's minimum version (must-do) and the project's name and supported languages
cmake_minimum_required(VERSION 3.8.2)
project(Hello_World)
# Call a framework utility function, passing it information about the hardware board that will be used - This function returns a structure known only to the framework
get_board_id(board_id nano atmega328)
# Create an executable suitable for Arduino using CMake-style target-creation
add_arduino_executable(Hello_World ${board_id} helloWorld.cpp)
# Upload the created target through a connected Serial Port (Where your board is connected to)
upload_arduino_target(Hello_World "${board_id}" COM3)
You should then call CMake (either through cmd, cmake-gui or an IDE if it supports that) passing it the argument -DCMAKE_TOOLCHAIN_FILE=[project_path]/cmake/Arduino-Toolchain.cmake
where [project_path]
is substituted by the project's full path. This is what allows cmake to use our framework.
That's it! It's super simple, yet super extensible :)
Everyone has their favorite IDE or text editor, and would like to continue using it as long as they can. Upon encountering a framework that doesn't support it - We get frustrated. Unfortunately that's often the case with the Arduino framework, as it offers a custom toolchain that makes it uncomfortable to use outside the dedicated Arduino IDE.
Arduino-CMake solves it by creating a framework leveraging all of Arduino's features, including its' custom toolchain, by adding a single dependency - The CMake build system.
The original project started back in 2011 by queezythegreat and had been actively developed until 2014, when it had been abandoned due to unknown reasons. Since then more than 150 (!) forks have emerged, leading to a "chaos" in the Arduino-CMake sphere. The most important moment however was in 2017, when a combined effort by JonasProgrammer and MrPointer has brought new life to the project in the face of the arduino-cmake organization. And yet, it still had its own problems, leading once again to an abandoned state.
Then, in 2018, an extreme effort has been made and the project has been completely rewritten (mostly by MrPointer) with a few very clear goals in mind:
- Platform-Independent - The framework shouldn't assume it works only with the basic Arduino platform, as there are many others out there. Any platform that confront to the design of the basic Arduino SDK is appropriate for use. An example of such a platform is ESP32.
- Modern CMake - All previous projects/forks have been using the fairly old CMake 2.8. CMake itself has transitioned much from version 2 to 3, benefiting from a whole lot of new exciting features. Even the official package managers support CMake 3 versions, so there's no excuse to not use it.
- Modern Arduino SDK - The Arduino SDK, much like CMake, has also undergone several major changes during the years, especially with version 1.6. The Arduino SDK has only recently got stable, and that's why we recommend always having the latest version installed, although we do have some minimum requirements for the framework to even work. You can find them at the Requirements section.
Arduino programs are simply C/C++ programs which take advantage of a framework which allows them to run on specific hardware devices. It means that those programs need to be compiled somehow. Back in the "old days" developers used compilers such as gcc directly from the command line. Then came build-tools such as make. Then came CMake. Most of the modern build systems today are managed by CMake and most of the modern IDEs know that and take advantage of it. But what's really useful in CMake, at least regarding our Arduino world, is the ability to cross-compile with a toolchain. The Arduino SDK, which one usually downloads together with the Arduino IDE, is actually also a toolchain, as it includes the required compilation & linkage tools for cross-compiling. Analyzing the SDK allows us to build a framework using this toolchain, and also all of Arduino's other cool features such as libraries, examples, etc.
NG stands for "New Generation". Inferred from the written above, it can easily be understood why the project has this name. However, if you don't think this name is good enough or it confuses you - Feel free to propose a name of your own, we're open for offers :)
The following list is the basic requirements of the framework in order to use it:
- Windows, OS X or Linux (BSD support is currently unknown, use at your own risk)
- CMake Version 3.8 or Higher
- Arduino-Based SDK compatible with Arduino SDK Version:
- 1.8.2 or Higher on Microsoft Windows
- 1.6.10 or Higher on Linux and Apple OS X
First, make sure to download the latest release of the framework.
Further instructions can be found in the Installation Wiki page.
The entire documentation of the project is hosted on GitHub using Wiki pages.
The project has strict contributing guidelines which can be found in the Contributing File.
MIT © 2018 Arduino-CMake