use('mrjones2014/smart-splits.nvim')
-- to use Kitty multiplexer support, run the post install hook
use({ 'mrjones2014/smart-splits.nvim', run = './install-kitty.sh' })

{ 'mrjones2014/smart-splits.nvim' }
-- to use Kitty multiplexer support, run the post install hook
{ 'mrjones2014/smart-splits.nvim', run = './install-kitty.sh' }

require('smart-splits').setup({
  -- Ignored filetypes (only while resizing)
  ignored_filetypes = {
    'nofile',
    'quickfix',
    'prompt',
  },
  -- Ignored buffer types (only while resizing)
  ignored_buftypes = { 'NvimTree' },
  -- the default number of lines/columns to resize by at a time
  default_amount = 3,
  -- whether to wrap to opposite side when cursor is at an edge
  -- e.g. by default, moving left at the left edge will jump
  -- to the rightmost window, and vice versa, same for up/down.
  wrap_at_edge = true,
  -- when moving cursor between splits left or right,
  -- place the cursor on the same row of the *screen*
  -- regardless of line numbers. False by default.
  -- Can be overridden via function parameter, see Usage.
  move_cursor_same_row = false,
  -- whether the cursor should follow the buffer when swapping
  -- buffers by default; it can also be controlled by passing
  -- `{ move_cursor = true }` or `{ move_cursor = false }`
  -- when calling the Lua function.
  cursor_follows_swapped_bufs = false,
  -- resize mode options
  resize_mode = {
    -- key to exit persistent resize mode
    quit_key = '<ESC>',
    -- keys to use for moving in resize mode
    -- in order of left, down, up' right
    resize_keys = { 'h', 'j', 'k', 'l' },
    -- set to true to silence the notifications
    -- when entering/exiting persistent resize mode
    silent = false,
    -- must be functions, they will be executed when
    -- entering or exiting the resize mode
    hooks = {
      on_enter = nil,
      on_leave = nil,
    },
  },
  -- ignore these autocmd events (via :h eventignore) while processing
  -- smart-splits.nvim computations, which involve visiting different
  -- buffers and windows. These events will be ignored during processing,
  -- and un-ignored on completed. This only applies to resize events,
  -- not cursor movement events.
  ignored_events = {
    'BufEnter',
    'WinEnter',
  },
  -- enable or disable a multiplexer integration
  -- set to false to disable, otherwise
  -- it will default to tmux if $TMUX is set,
  -- then wezterm if $WEZTERM_PANE is set,
  -- then kitty if $KITTY_LISTEN_ON is set,
  -- otherwise false
  multiplexer_integration = nil,
  -- disable multiplexer navigation if current multiplexer pane is zoomed
  -- this functionality is only supported on tmux due to wezterm and kitty
  -- not having a way to check if a pane is zoomed
  disable_multiplexer_nav_when_zoomed = true,
})

require('smart-splits').setup({
  resize_mode = {
    hooks = {
      on_leave = require('bufresize').register,
    },
  },
})

require('smart-splits').setup({
  resize_mode = {
    silent = true,
    hooks = {
      on_enter = function()
        vim.notify('Entering resize mode')
      end,
      on_leave = function()
        vim.notify('Exiting resize mode, bye')
      end,
    },
  },
})

-- resizing splits
-- amount defaults to 3 if not specified
-- use absolute values, no + or -
-- the functions also check for a range,
-- so for example if you bind `<A-h>` to `resize_left`,
-- then `10<A-h>` will `resize_left` by `(10 * config.default_amount)`
require('smart-splits').resize_up(amount)
require('smart-splits').resize_down(amount)
require('smart-splits').resize_left(amount)
require('smart-splits').resize_right(amount)
-- moving between splits
-- pass same_row as a boolean to override the default
-- for the move_cursor_same_row config option.
-- See Configuration.
require('smart-splits').move_cursor_up()
require('smart-splits').move_cursor_down()
require('smart-splits').move_cursor_left(same_row)
require('smart-splits').move_cursor_right(same_row)
-- Swapping buffers directionally with the window to the specified direction
require('smart-splits').swap_buf_up()
require('smart-splits').swap_buf_down()
require('smart-splits').swap_buf_left()
require('smart-splits').swap_buf_right()
-- the buffer swap functions can also take an `opts` table to override the
-- default behavior of whether or not the cursor follows the buffer
require('smart-splits').swap_buf_right({ move_cursor = true })
-- persistent resize mode
-- temporarily remap your configured resize keys to
-- smart resize left, down, up, and right, respectively,
-- press <ESC> to stop resize mode (unless you've set a different key in config)
-- resize keys also accept a range, e.e. pressing `5j` will resize down 5 times the default_amount
require('smart-splits').start_resize_mode()

-- recommended mappings
-- resizing splits
-- these keymaps will also accept a range,
-- for example `10<A-h>` will `resize_left` by `(10 * config.default_amount)`
vim.keymap.set('n', '<A-h>', require('smart-splits').resize_left)
vim.keymap.set('n', '<A-j>', require('smart-splits').resize_down)
vim.keymap.set('n', '<A-k>', require('smart-splits').resize_up)
vim.keymap.set('n', '<A-l>', require('smart-splits').resize_right)
-- moving between splits
vim.keymap.set('n', '<C-h>', require('smart-splits').move_cursor_left)
vim.keymap.set('n', '<C-j>', require('smart-splits').move_cursor_down)
vim.keymap.set('n', '<C-k>', require('smart-splits').move_cursor_up)
vim.keymap.set('n', '<C-l>', require('smart-splits').move_cursor_right)
-- swapping buffers between windows
vim.keymap.set('n', '<leader><leader>h', require('smart-splits').swap_buf_left)
vim.keymap.set('n', '<leader><leader>j', require('smart-splits').swap_buf_down)
vim.keymap.set('n', '<leader><leader>k', require('smart-splits').swap_buf_up)
vim.keymap.set('n', '<leader><leader>l', require('smart-splits').swap_buf_right)

local w = require('wezterm')

-- Equivalent to POSIX basename(3)
-- Given "/foo/bar" returns "bar"
-- Given "c:\\foo\\bar" returns "bar"
local function basename(s)
  return string.gsub(s, '(.*[/\\])(.*)', '%2')
end

local function is_vim(pane)
  local process_name = basename(pane:get_foreground_process_name())
  return process_name == 'nvim' or process_name == 'vim'
end

local direction_keys = {
  Left = 'h',
  Down = 'j',
  Up = 'k',
  Right = 'l',
  -- reverse lookup
  h = 'Left',
  j = 'Down',
  k = 'Up',
  l = 'Right',
}

local function split_nav(resize_or_move, key)
  return {
    key = key,
    mods = resize_or_move == 'resize' and 'META' or 'CTRL',
    action = w.action_callback(function(win, pane)
      if is_vim(pane) then
        -- pass the keys through to vim/nvim
        win:perform_action({
          SendKey = { key = key, mods = resize_or_move == 'resize' and 'META' or 'CTRL' },
        }, pane)
      else
        if resize_or_move == 'resize' then
          win:perform_action({ AdjustPaneSize = { direction_keys[key], 3 } }, pane)
        else
          win:perform_action({ ActivatePaneDirection = direction_keys[key] }, pane)
        end
      end
    end),
  }
end

return {
  keys = {
    -- move between split panes
    split_nav('move', 'h'),
    split_nav('move', 'j'),
    split_nav('move', 'k'),
    split_nav('move', 'l'),
    -- resize panes
    split_nav('resize', 'h'),
    split_nav('resize', 'j'),
    split_nav('resize', 'k'),
    split_nav('resize', 'l'),
  },
}