By Chema Gonzalez, 2020-09-11
This document describes h265nal, a simpler H265 NAL unit parser.
Final goal it to create a binary that accepts a file in h265 Annex B format (.265) and dumps the contents of the parsed NALs.
h264nal is a similar project to parse H264 NAL units.
Get the git repo, and then build using cmake.
$ git clone https://github.com/chemag/h265nal
$ cd h265nal
$ mkdir build
$ cd build
$ cmake .. # also cmake -DCMAKE_BUILD_TYPE=RelWithDebInfo ..
$ make
Feel free to test all the unittests:
$ make test
Running tests...
Test project h265nal/build
Start 1: h265_profile_tier_level_parser_unittest
1/10 Test #1: h265_profile_tier_level_parser_unittest ... Passed 0.00 sec
Start 2: h265_vps_parser_unittest
2/10 Test #2: h265_vps_parser_unittest .................. Passed 0.00 sec
Start 3: h265_vui_parameters_parser_unittest
3/10 Test #3: h265_vui_parameters_parser_unittest ....... Passed 0.00 sec
Start 4: h265_st_ref_pic_set_parser_unittest
4/10 Test #4: h265_st_ref_pic_set_parser_unittest ....... Passed 0.00 sec
Start 5: h265_sps_parser_unittest
5/10 Test #5: h265_sps_parser_unittest .................. Passed 0.00 sec
Start 6: h265_pps_parser_unittest
6/10 Test #6: h265_pps_parser_unittest .................. Passed 0.00 sec
Start 7: h265_aud_parser_unittest
7/10 Test #7: h265_aud_parser_unittest .................. Passed 0.00 sec
Start 8: h265_slice_parser_unittest
8/10 Test #8: h265_slice_parser_unittest ................ Passed 0.00 sec
Start 9: h265_bitstream_parser_unittest
9/10 Test #9: h265_bitstream_parser_unittest ............ Passed 0.00 sec
Start 10: h265_nal_unit_parser_unittest
10/10 Test #10: h265_nal_unit_parser_unittest ............. Passed 0.00 sec
100% tests passed, 0 tests failed out of 10
Total Test time (real) = 0.04 sec
Or to test any of the unittests:
$ ./test/h265_profile_tier_level_parser_unittest
Running main() from /builddir/build/BUILD/googletest-release-1.8.1/googletest/src/gtest_main.cc
[==========] Running 1 test from 1 test case.
[----------] Global test environment set-up.
[----------] 1 test from H265ProfileTierLevelParserTest
[ RUN ] H265ProfileTierLevelParserTest.TestSampleValue
[ OK ] H265ProfileTierLevelParserTest.TestSampleValue (0 ms)
[----------] 1 test from H265ProfileTierLevelParserTest (0 ms total)
[----------] Global test environment tear-down
[==========] 1 test from 1 test case ran. (0 ms total)
[ PASSED ] 1 test.
Check the included vector file:
$ ./tools/h265nal ../media/foo.265
h265nal: original version
nal_unit { nal_unit_header { forbidden_zero_bit: 0 nal_unit_type: 39 nuh_layer_id: 0 nuh_temporal_id_plus1: 1 } nal_unit_payload { } }
...
nal_unit { nal_unit_header { forbidden_zero_bit: 0 nal_unit_type: 0 nuh_layer_id: 0 nuh_temporal_id_plus1: 1 } nal_unit_payload { slice_segment_layer { slice_segment_header { first_slice_segment_in_pic_flag: 1 no_output_of_prior_pics_flag: 0 slice_pic_parameter_set_id: 0 dependent_slice_segment_flag: 0 slice_segment_address: 0 slice_reserved_flag { } slice_type: 0 pic_output_flag: 0 colour_plane_id: 0 slice_pic_order_cnt_lsb: 77 short_term_ref_pic_set_sps_flag: 0 st_ref_pic_set { num_negative_pics: 5 num_positive_pics: 1 delta_poc_s0_minus1 { 2 4 2 2 3 } used_by_curr_pic_s0_flag { 1 1 1 1 1 } delta_poc_s1_minus1 { 0 } used_by_curr_pic_s1_flag { 1 } } slice_temporal_mvp_enabled_flag: 1 slice_sao_luma_flag: 1 slice_sao_chroma_flag: 1 num_ref_idx_active_override_flag: 1 num_ref_idx_l0_active_minus1: 4 num_ref_idx_l1_active_minus1: 0 mvd_l1_zero_flag: 0 collocated_from_l0_flag: 0 five_minus_max_num_merge_cand: 1 slice_qp_delta: 15 slice_loop_filter_across_slices_enabled_flag: 0 num_entry_point_offsets: 12 offset_len_minus1: 5 entry_point_offset_minus1 { 10 2 27 9 2 17 14 24 18 21 16 6 } } } } }
Parse all the NAL units of an Annex B (.265 extension) file.
$ ./tools/h265nal file.265 --noas-one-line --add-length --add-offset
nal_unit {
offset: 0x00000004
length: 23
nal_unit_header {
forbidden_zero_bit: 0
nal_unit_type: 32
nuh_layer_id: 0
nuh_temporal_id_plus1: 1
}
vps {
vps_video_parameter_set_id: 0
vps_base_layer_internal_flag: 1
vps_base_layer_available_flag: 1
vps_max_layers_minus1: 0
...
There are 3 ways to integrate the parser in your C++ parser:
If you just have a binary blob with the full contents of a file in Annex B
format, use the H265BitstreamParser::ParseBitstream() method. This case
is useful, for example, when you have an Annex B format file (a file with
.265 or .h265 extension). You read the whole file in memory, and then
convert the read blob into a set of parsed NAL units.
The following code has been copied from tools/h265nal.cc:
// read your .265 file into the vector `buffer`
std::vector<uint8_t> buffer(size);
// create bitstream parser from the file
std::unique_ptr<h265nal::H265BitstreamParser::BitstreamState> bitstream =
h265nal::H265BitstreamParser::ParseBitstream(
buffer.data(), buffer.size(), options->add_offset,
options->add_length, options->add_parsed_length);
The H265BitstreamParser::ParseBitstream() function receives a generic
binary string (data and length) that you read from the file, plus
some options (whether to add options, length, and parsed length to each
NAL units).
It then:
- (1) splits the input string into a vector of NAL units, and
- (2) parses the NAL units, and add them to the vector
If you have a series of binary blobs with NAL units, use the
H265NalUnitParser::ParseNalUnit() method. This case is useful for example
if you have a producer of NAL units (e.g. an encoder), and you want to
parse them as soon as they are produced.
The following code has been copied from H265BitstreamParser::ParseBitstream()
in src/h265_bitstream_parser.cc:
// keep a bitstream parser state (to keep the VPS/PPS/SPS NALUs)
h265nal::H265BitstreamParserState bitstream_parser_state;
// create bitstream parser
std::unique_ptr<h265nal::H265BitstreamParser::BitstreamState> bitstream;
while (1) {
const uint8_t* data = ...; // get pointer to the NAL start
size_t length = ...; // get NAL size
auto nal_unit = H265NalUnitParser::ParseNalUnit(
data, length, bitstream_parser_state);
// check whether the parser was successful
if (nal_unit == nullptr) {
// cannot parse the NalUnit
continue;
}
// check the parser offset
auto offset = nalu_index.payload_start_offset;
auto length = nalu_index.payload_size;
}
The H265NalUnitParser::ParseNalUnit() function receives a generic
binary string (data and length) that contains a NAL unit, plus
a H265BitstreamParserState object that keeps all the VPS/SPS/PPS it
ever sees. It then parses the NAL unit, and returns it (including the
parsing offsets).
It will also update the input H265BitstreamParserState object if it
sees any VPS/PPS/SPS. This is important if the parsed NAL unit has state
that needs to be used to parse other NAL units (VPS, SPS, PPS): In that
case it will be stored into the BitstreamParserState object that is
passed around.
Note that H265NalUnitParser::ParseNalUnit() will only parse 1 NAL unit.
There are some producers that will instead produce multiple NAL units
in the output buffer. For example, an h265 encoder producing a key frame
may return 4 NAL units (VPS, PPS, SPS, and slice header).
If you want to just pass consecutive RTP packets (rfc7798 format), and get
information on their contents, use the H265RtpParser::ParseRtp method.
The following code has been copied from test/h265_rtp_parser_unittest.cc.
// keep a bitstream parser state (to keep the VPS/PPS/SPS NALUs)
H265BitstreamParserState bitstream_parser_state;
// parse packet(s)
std::unique_ptr<H265RtpParser::RtpState> rtp = H265RtpParser::ParseRtp(
buffer, arraysize(buffer),
&bitstream_parser_state);
// packets will return the actual contents into `rtp`, and update the
// bitstream parser state if the RTP packet contains a VPS/SPS/PPS.
// check the main packet contents
switch (rtp->nal_unit_header.nal_unit_type) {
case AP:
{
// an AP (Aggregation Packet) packet contains 2+ NAL Units
// number_of_packets := rtp->rtp_ap.nal_unit_payloads.size()
// packet_i := rtp->rtp_ap.nal_unit_payloads[i]
}
case FU:
{
// an FU (Fragmentation Units) packet contains a piece of a NAL unit
// has_start_of_packet := rtp->rtp_fu.s_bit
// internal_type := rtp->rtp_fu.fu_type
// packet := rtp->rtp_fu.nal_unit_payload
}
default:
{
// a packet containing a single NAL Unit
// header := rtp->rtp_single.nal_unit_header
// payload := rtp->rtp_single.nal_unit_payload
}
}
// access to the VPS/SPS/PPS map
// e.g. bitstream_parser_state.sps[sps_id].pic_width_in_luma_samples
Requires gtests, gmock.
The webrtc directory contains an RBSP parser copied from webrtc.
The fuzz directory contains information on fuzzing the parser.
List of tasks:
- add lacking parsers (e.g. SEI)
- remove TODO entries from the code
- move headers to separate
include/file to allow easier programmatic integration - add a set of Annex B files for testing
- no support for PACI (rfc7798 Section 4.4.4)
h265nal is BSD licensed, as found in the LICENSE file.
- install gtests (see here)
$ git clone https://github.com/google/googletest
$ cd googletest
$ mkdir build
$ cd build
$ cmake ..
$ make
$ sudo make install
- install llvm (see here)
$ brew install llvm
$ ln -s "$(brew --prefix llvm)/bin/clang-format" "/usr/local/bin/clang-format"
$ ln -s "$(brew --prefix llvm)/bin/clang-tidy" "/usr/local/bin/clang-tidy"
$ ln -s "$(brew --prefix llvm)/bin/clang-apply-replacements" "/usr/local/bin/clang-apply-replacements"
React
Typescript
Django
Laravel
Facebook
Microsoft
Google
Alibaba
D3
Tencent