arm[RRTConnectkConfigDefault]: Unable to sample any valid states for goal tree about easy_handeye HOT 3 CLOSED

Hi @kctoayo88,

this means that the planner does not manage to move the robot in one direction starting from the current position of the robot.

You might try positioning the robot in a way such that its "hand" can rotate a bit about all axis, and translate in all directions, without reaching a joint limit.

The GUI automatically tries to move the robot in all directions before starting the procedure, to avoid giving an error in the middle of the calibration procedure (or at the end, which would be even more infuriating).

from easy_handeye.

@marcoesposito1988 thanks for your reply.

I already tried to change the direction and angle of robot in many cases, but still can't work.
Is it any other solution could help me complete it?

I was trying to operate it manually, but result is poor.
Hope you could give me more tips of it.

Thanks a lot.

Edit:
I searched the some tutorials about this.
I guess it may be a joint limit problem, could you check it for me?
PS. My robot is not the same type of UR5.

from easy_handeye.

I think that the problem is not the orientation, but the fact that the robot is already at the edge of its workspace (i.e. it is almost fully elongated).

You may try again moving the end effector towards the base of the robot.

from easy_handeye.