This project has been superseded by Gateless Gate #.
- Download precompiled binaries for 64-bit Windows (0.1.3-pre6b)
- Download the source code for Linux (0.1.3-pre6b)
- Download precompiled binaries for 64-bit Windows (0.1.2)
- Download the source code for Linux (0.1.2)
Gateless Gate is a cross-platform OpenCL ZEC/ETH/XMR/PASC/FTC miner for video cards with the AMD GCN architecture and the NVIDIA Maxwell and Pascal architectures. It is a completely redesigned fork of Marc Bevand's SILENTARMY V5 with a significant speed boost combined with the well-tested user-interface and back-end of sgminer-gm. This miner runs at around 256 sol/s on stock RX 480 and 193 sol/s on stock GTX 1060 3GB. (For optimal performance for ZEC mining, you need to run the miner on Linux for now.)
On 64-bit Windows operating systems, all you have to do for mining is to download the precompiled binary, edit one of the .conf files, and run the corresponding .bat file. This miner has been tested against AMD Crimson Software 16.9.2 and NVIDIA Display Driver 376.33.
On Linux, you should be able to build the miner with the Makefile in the repository. Both AMDGPU-PRO drivers and fglrx drivers are supported now. Please refer to the documentation of the original sgminer-gm below for details. Once the miner is successfully built, you can edit one of the .conf files and run the corresponding .sh script. This miner has been tested with the following distributions:
- Ubuntu 16.04.01 LTS with Linux Kernel 4.10.1 and AMDGPU-PRO 16.60.
- Ubuntu 14.04.01 LTS with fglrx-updates.
Please note that software/BIOS configurations for other miners do not necessarily transfer to Gateless Gate. When you are using it for the first time, you need to disable overclocking/underclocking/overvolting/undervolting/custom memory straps. Please also note that this software is still in the alpha stage, and some of its features are highly experimental. If you have questions or feedback, please post them to:
- https://bitcointalk.org/index.php?topic=1716584
- https://forum.z.cash/t/gateless-gate-a-fork-of-the-silentarmy-miner-has-arrived/12838
There is a voluntary 1% developer's fee. Please keep the entries for it in the .conf file as I am totally broke now and I won't be able to continue open-source development for too long without it. You could also send additional donations to:
1BHwDWVerUTiKxhHPf2ubqKKiBMiKQGomZ
(Bitcoin)t1NwUDeSKu4BxkD58mtEYKDjzw5toiLfmCu
(Zcash)
Last but not least, I would like to thank nerdralph, sp_, and eXtremal for invaluable advice.
zawawa @ bitcointalk.org
This is a multi-threaded multi-pool GPU miner with ATI GPU monitoring, (over)clocking and fanspeed support for scrypt-based cryptocurrency. It is based on cgminer by Con Kolivas (ckolivas), which is in turn based on cpuminer by Jeff Garzik (jgarzik).
releases: https://github.com/sgminer-dev/sgminer/releases
git tree: https://github.com/sgminer-dev/sgminer
bugtracker: https://github.com/sgminer-dev/sgminer/issues
irc: #sgminer
and #sgminer-dev
on freenode
mailing lists: https://sourceforge.net/p/sgminer/mailman/
License: GPLv3. See COPYING
for details.
Documentation is available in directory doc
. It is organised by topics:
API
for the RPC API specification;configuration.md
for (largely incomplete) detailed information on all configuration options;FAQ.md
for frequently asked questions;GPU
for semi-obsolete information on GPU configuration options and mining SHA256d-based coins;kernel.md
for OpenCL kernel-related information, including development procedure;MINING.md
for how to find the right balance in GPU configuration to mine Scrypt-based coins efficiently;windows-build.txt
for information on how to build on Windows.
Note that most of the documentation is outdated or incomplete. If you want to contribute, fork this repository, update as needed, and submit a pull request.
Mandatory:
- curl dev library -
libcurl4-openssl-dev
on Debian - pkg-config
- libtool
- AMD APP SDK - available under various names as a package on different GNU/Linux distributions
Optional:
- curses dev library -
libncurses5-dev
on Debian orlibpdcurses
on WIN32, for text user interface - AMD ADL SDK - version 6, required for ATI GPU monitoring & clocking
If building from git:
- autoconf
- automake
sgminer-specific configuration options:
--disable-adl Override detection and disable building with adl
--disable-adl-checks
--without-curses Do not compile support for curses TUI
apt-get install libcurl4-openssl-dev pkg-config libtool libncurses5-dev
AMD APP SDK and AMD ADL SDK must be downloaded from the amd websites.
If needed, place include headers (*.h
files) from ADL_SDK_*<VERSION>*.zip
in sgminer/ADL_SDK
.
Then:
git submodule init
git submodule update
autoreconf -i
CFLAGS="-O2 -Wall -march=native -std=gnu99" ./configure <options>
make
To compile a version that can be used accross machines, remove
-march=native
.
To compile a debug version, replace -O2
with -ggdb
.
Depending on your environment, replace -std=gnu99
with -std=c99
.
Systemwide installation is optional. You may run sgminer
from the build
directory directly, or make install
if you wish to install
sgminer
to a system location or a location you specified with --prefix
.
See doc/windows-build.txt
for MinGW compilation and cross-compiation,
doc/cygwin-build.txt
for building using Cygwin, or use the provided
winbuild
Microsoft Visual Studio project (tested on MSVS2010), with
instructions in winbuild/README.txt
.
WARNING: documentation below this point has not been updated since the fork.
After saving configuration from the menu, you do not need to give sgminer any arguments and it will load your configuration.
Any configuration file may also contain a single
"include" : "filename"
to recursively include another configuration file.
Writing the configuration will save all settings from all files in the output.
Single pool:
sgminer -o http://pool:port -u username -p password
Multiple pools:
sgminer -o http://pool1:port -u pool1username -p pool1password -o http://pool2:port -u pool2usernmae -p pool2password
Single pool with a standard http proxy, regular desktop:
sgminer -o "http:proxy:port|http://pool:port" -u username -p password
Single pool with a socks5 proxy, regular desktop:
sgminer -o "socks5:proxy:port|http://pool:port" -u username -p password
Single pool with stratum protocol support:
sgminer -o stratum+tcp://pool:port -u username -p password
The list of proxy types are: http: standard http 1.1 proxy http0: http 1.0 proxy socks4: socks4 proxy socks5: socks5 proxy socks4a: socks4a proxy socks5h: socks5 proxy using a hostname
If you compile sgminer with a version of CURL before 7.19.4 then some of the above will not be available. All are available since CURL version 7.19.4.
If you specify the --socks-proxy option to sgminer, it will only be applied to all pools that don't specify their own proxy setting like above.
For more advanced usage , run sgminer --help
.
See doc/GPU
for more information regarding GPU mining and
doc/SCRYPT
for more information regarding Scrypt mining.
The following options are available while running with a single keypress:
[P]ool management [G]PU management [S]ettings [D]isplay options [Q]uit
P gives you:
Current pool management strategy: Failover
[F]ailover only disabled
[A]dd pool [R]emove pool [D]isable pool [E]nable pool
[C]hange management strategy [S]witch pool [I]nformation
S gives you:
[Q]ueue: 1
[S]cantime: 60
[E]xpiry: 120
[W]rite config file
[C]gminer restart
D gives you:
[N]ormal [C]lear [S]ilent mode (disable all output)
[D]ebug:off
[P]er-device:off
[Q]uiet:off
[V]erbose:off
[R]PC debug:off
[W]orkTime details:off
co[M]pact: off
[L]og interval:5
Q quits the application.
G gives you something like:
GPU 0: [124.2 / 191.3 Mh/s] [A:77 R:33 HW:0 U:1.73/m WU 1.73/m]
Temp: 67.0 C
Fan Speed: 35% (2500 RPM)
Engine Clock: 960 MHz
Memory Clock: 480 Mhz
Vddc: 1.200 V
Activity: 93%
Powertune: 0%
Last initialised: [2011-09-06 12:03:56]
Thread 0: 62.4 Mh/s Enabled ALIVE
Thread 1: 60.2 Mh/s Enabled ALIVE
[E]nable [D]isable [R]estart GPU [C]hange settings
Or press any other key to continue
The running log shows output like this:
[2012-10-12 18:02:20] Accepted f0c05469 Diff 1/1 GPU 0 pool 1
[2012-10-12 18:02:22] Accepted 218ac982 Diff 7/1 GPU 1 pool 1
[2012-10-12 18:02:23] Accepted d8300795 Diff 1/1 GPU 3 pool 1
[2012-10-12 18:02:24] Accepted 122c1ff1 Diff 14/1 GPU 1 pool 1
The 8 byte hex value are the 2nd 8 bytes of the share being submitted to the pool. The 2 diff values are the actual difficulty target that share reached followed by the difficulty target the pool is currently asking for.
The output line shows the following:
(5s):1713.6 (avg):1707.8 Mh/s | A:729 R:8 HW:0 WU:22.53/m
Each column is as follows: 5s: A 5 second exponentially decaying average hash rate avg: An all time average hash rate A: The total difficulty of Accepted shares R: The total difficulty of Rejected shares HW: The number of HardWare errors WU: The Work Utility defined as the number of diff1 shares work / minute (accepted or rejected).
GPU 1: 73.5C 2551RPM | 427.3/443.0Mh/s | A:8 R:0 HW:0 WU:4.39/m
Each column is as follows: Temperature (if supported) Fanspeed (if supported) A 5 second exponentially decaying average hash rate An all time average hash rate The total difficulty of accepted shares The total difficulty of rejected shares The number of hardware erorrs The work utility defined as the number of diff1 shares work / minute
The sgminer status line shows:
ST: 1 SS: 0 NB: 1 LW: 8 GF: 1 RF: 1
ST is STaged work items (ready to use). SS is Stale Shares discarded (detected and not submitted so don't count as rejects) NB is New Blocks detected on the network LW is Locally generated Work items GF is Getwork Fail Occasions (server slow to provide work) RF is Remote Fail occasions (server slow to accept work)
The block display shows:
Block: 0074c5e482e34a506d2a051a... Started: [17:17:22] Best share: 2.71K
This shows a short stretch of the current block, when the new block started, and the all time best difficulty share you've found since starting sgminer this time.
A number of different strategies for dealing with multipool setups are available. Each has their advantages and disadvantages so multiple strategies are available by user choice, as per the following list:
The default strategy is failover. This means that if you input a number of pools, it will try to use them as a priority list, moving away from the 1st to the 2nd, 2nd to 3rd and so on. If any of the earlier pools recover, it will move back to the higher priority ones.
This strategy only moves from one pool to the next when the current one falls idle and makes no attempt to move otherwise.
This strategy moves at user-defined intervals from one active pool to the next, skipping pools that are idle.
This strategy sends work to all the pools on a quota basis. By default, all pools are allocated equal quotas unless specified with --quota. This apportioning of work is based on work handed out, not shares returned so is independent of difficulty targets or rejected shares. While a pool is disabled or dead, its quota is dropped until it is re-enabled. Quotas are forward looking, so if the quota is changed on the fly, it only affects future work. If all pools are set to zero quota or all pools with quota are dead, it will fall back to a failover mode. See quota below for more information.
The failover-only flag has special meaning in combination with load-balance mode and it will distribute quota back to priority pool 0 from any pools that are unable to provide work for any reason so as to maintain quota ratios between the rest of the pools.
This strategy monitors the amount of difficulty 1 shares solved for each pool and uses it to try to end up doing the same amount of work for all pools.
The load-balance multipool strategy works off a quota based scheduler. The quotas handed out by default are equal, but the user is allowed to specify any arbitrary ratio of quotas. For example, if all the quota values add up to 100, each quota value will be a percentage, but if 2 pools are specified and pool0 is given a quota of 1 and pool1 is given a quota of 9, pool0 will get 10% of the work and pool1 will get 90%. Quotas can be changed on the fly by the API, and do not act retrospectively. Setting a quota to zero will effectively disable that pool unless all other pools are disabled or dead. In that scenario, load-balance falls back to regular failover priority-based strategy. While a pool is dead, it loses its quota and no attempt is made to catch up when it comes back to life.
To specify quotas on the command line, pools should be specified with a semicolon separated --quota(or -U) entry instead of --url. Pools specified with --url are given a nominal quota value of 1 and entries can be mixed.
For example: --url poola:porta -u usernamea -p passa --quota "2;poolb:portb" -u usernameb -p passb Will give poola 1/3 of the work and poolb 2/3 of the work.
Writing configuration files with quotas is likewise supported. To use the above quotas in a configuration file they would be specified thus:
"pools" : [
{
"url" : "poola:porta",
"user" : "usernamea",
"pass" : "passa"
},
{
"quota" : "2;poolb:portb",
"user" : "usernameb",
"pass" : "passb"
}
]
If you want to store a number of pools in your configuration file, but don't always want them automatically enabled at start up (or restart), then the "state" option with a value of "disabled" can be used:
"pools" : [
{
"url" : "poola:porta",
"user" : "usernamea",
"pass" : "passa"
},
{
"quota" : "2;poolb:portb",
"user" : "usernameb",
"pass" : "passb",
"state" : "disabled"
}
]
It is then trivial to change the "state" setting to "enabled" in the configuration file at anytime and then restart the miner (see below). You can enable the pool whilst the miner is still running ('p' followed by 'e' followed by pool number) - but the pool will still be disabled on restart if the config file is not changed.
"state" can also be set to "hidden". This allows the json file to contain a large number of pools, of which some could be automatically culled at start up. This makes it easy to swap pools in and out of the runtime selection, without having a large list of pools cluttering up the display.
"pools" : [
{
"poolname" : "Main Pool",
"url" : "poola:porta",
"user" : "usernamea",
"pass" : "passa",
"state" : "disabled"
},
{
"poolname" : "Joe's Weekend Pool",
"quota" : "2;poolb:portb",
"user" : "usernameb",
"pass" : "passb",
"state" : "hidden"
}
]
These options are considered experimental and therefore will NOT be created when the 'Write config file' option is used ('s' followed by 'w').
A restart of the miner ('s' followed by 'c') will reload the config file and any changes that may have been made.
sgminer will log to stderr if it detects stderr is being redirected to a
file. To enable logging simply append 2>logfile.txt
to your command line
and logfile.txt
will contain all debug output unless you set debug-log
to false
, in which case it will only contain output at the log level you
specified (notice by default).
There is also the -m option on Linux which will spawn a command of your choice and pipe the output directly to that command.
The WorkTime details 'debug' option adds details on the end of each line displayed for Accepted or Rejected work done. An example would be:
<-00000059.ed4834a3 M:X D:1.0 G:17:02:38:0.405 C:1.855 (2.995) W:3.440 (0.000) S:0.461 R:17:02:47
The first 2 hex codes are the previous block hash, the rest are reported in seconds unless stated otherwise: The previous hash is followed by the getwork mode used M:X where X is one of P:Pool, T:Test Pool, L:LP or B:Benchmark, then D:d.ddd is the difficulty required to get a share from the work, then G:hh:mm:ss:n.nnn, which is when the getwork or LP was sent to the pool and the n.nnn is how long it took to reply, followed by 'O' on it's own if it is an original getwork, or 'C:n.nnn' if it was a clone with n.nnn stating how long after the work was recieved that it was cloned, (m.mmm) is how long from when the original work was received until work started, W:n.nnn is how long the work took to process until it was ready to submit, (m.mmm) is how long from ready to submit to actually doing the submit, this is usually 0.000 unless there was a problem with submitting the work, S:n.nnn is how long it took to submit the completed work and await the reply, R:hh:mm:ss is the actual time the work submit reply was received
If you start sgminer with the --sharelog option, you can get detailed information for each share found. The argument to the option may be "-" for standard output (not advisable with the ncurses UI), any valid positive number for that file descriptor, or a filename.
To log share data to a file named "share.log", you can use either: ./sgminer --sharelog 50 -o xxx -u yyy -p zzz 50>share.log ./sgminer --sharelog share.log -o xxx -u yyy -p zzz
For every share found, data will be logged in a CSV (Comma Separated Value) format: timestamp,disposition,target,pool,dev,thr,sharehash,sharedata For example (this is wrapped, but it's all on one line for real): 1335313090,reject, ffffffffffffffffffffffffffffffffffffffffffffffffffffffff00000000, http://localhost:8337,GPU0,0, 6f983c918f3299b58febf95ec4d0c7094ed634bc13754553ec34fc3800000000, 00000001a0980aff4ce4a96d53f4b89a2d5f0e765c978640fe24372a000001c5 000000004a4366808f81d44f26df3d69d7dc4b3473385930462d9ab707b50498 f681634a4f1f63d01a0cd43fb338000000000080000000000000000000000000 0000000000000000000000000000000000000000000000000000000080020000