The ciaowarmha from howlow

小沃目前支持接入Home Assistant的产品有：
- 小沃精灵
- 小沃精灵S1
- 星联网关
- 小融网关
- 小沃壁挂炉
- 小沃房间温控器
- 星联网关已完成适配的第三方壁挂炉
接入步骤：
- 通过应用市场下载并安装小沃云家App（Android和iOS都可以），通过手机号完成登录与绑定设备操作。
- 点击此链接 (获取授权码)，通过手机号（注：输入的手机号需与步骤1的登录手机号一致）获取授权码，保存获取到的授权码。
- 将ciaowarm文件夹复制到Home Assistant的custom_components文件夹下，并重启Home Assistant。
- 点击Home Assistant左侧导航栏“配置”，点击"设备与服务"，点击右下角的“添加集成”，选择“Ciaowarm”品牌，在上面的输入框内输入步骤1和2所用的手机号，在下面的输入框内输入步骤2获取到的授权码，点击“提交”，即可完成接入。

支持的参数：

温控器：

小沃壁挂炉：

第三方壁挂炉：

Ciaowarm currently supports the following products for integration with Home Assistant:
- Ciaowarm Smart
- Ciaowarm Smart S1
- Starlink Gateway
- Halowarm Gateway
- Ciaowarm Wall-mounted Boiler
- Ciaowarm room thermostat
- Third-party Wall-mounted Boilers compatible with Starlink Gateway
Integration Steps:
- Download and install the Ciaowarm App from the App store (available for both Android and iOS). Log in and bind devices using your phone number.
- Click on this link (Get Authorization Code and obtain the authorization code by entering your phone number (Note: The phone number entered must match the one used for login in step 1). Save the obtained authorization code.
- Copy the "ciaowarm" folder to the "custom_components" folder in Home Assistant, and restart Home Assistant.
- Click on the "Configuration" tab on the left sidebar of Home Assistant, then click on "Devices & Services", and finally click on "Add Integration" in the bottom right corner. Select the "Ciaowarm" brand, enter the phone number used in steps 1 and 2 in the input box above, enter the authorization code obtained in step 2 in the input box below, click "Submit", and you will have completed the integration.

Supported Parameters:

Thermostat:

Parameter Name	Operation Permission
Gateway ID	Read-only
Thermostat ID	Read-only
Thermostat Online State	Read-only
Thermostat Name	Read-only
Indoor Temperature	Read-only
Away Mode Target Temperature	Read-write
Home Mode Target Temperature	Read-write
Sleep Mode Target Temperature	Read-write
Mode	Read-write

Ciaowarm Wall-mounted Boiler:

Parameter Name	Operation Permission
Gateway ID	Read-only
Boiler ID	Read-only
Boiler Online State	Read-only
Power On/Off	Read-write
Winter/Summer Mode	Read-write
Automatic Control of Heating Water Target Temperature	Read-write
Bathroom Water Short-term Preheating Switch	Read-write (Only available when the boiler supports bathroom water preheating)
Heating Water Target Temperature	Read-write when Automatic Control of Heating Water Target Temperature is disabled; Read-only when enabled
Bathroom Water Target Temperature	Read-write
Heating Water Outlet Temperature	Read-only
Bathroom Water Outlet Temperature	Read-only
Fault Code	Read-only
Flame Status	Read-only
Water Pressure Value	Read-only

Third-party Wall-mounted Boiler:

Parameter Name	Operation Permission
Gateway ID	Read-only
Gateway Online State	Read-only
Automatic Control	Read-write
Heating Allowance	Read-write
Bathroom Allowance	Read-write
Heating Water Target Temperature	Read-write when Automatic Control is disabled; Read-only when enabled
Bathroom Water Target Temperature	Read-write
Heating Water Actual Temperature	Read-only
Bathroom Water Actual Temperature	Read-only
Fault Code	Read-only

howlow / ciaowarmha Goto Github PK