A suite of c++ libraries for radio astronomy data processing.

The casacore source code is maintained on github.

You can obtain it using:

$ git clone https://github.com/casacore/casacore

To compile casacore you need to meet the following requirements:

• cmake
• gfortran
• g++
• flex
• bison
• blas
• lapack
• cfitsio (3.181 or later)
• wcslib (4.20 or later)
• sofa (optional, only for testing casacore measures)
• fftw3 (optional)
• hdf5 (optional)
• numpy (optional)
• boost-python (optional)
• ncurses (optional)

On Debian / Ubuntu you can install these with:

$ sudo apt-get install build-essential cmake gfortran g++ libncurses5-dev \
   libreadline-dev flex bison libblas-dev liblapacke-dev libcfitsio3-dev \
   wcslib-dev 

and the optional libraries:

$ sudo apt-get install libhdf5-serial-dev libfftw3-dev python-numpy \
    libboost-python-dev libpython3.4-dev libpython2.7-dev

On CentOS7 you can install these with:

$ sudo yum install cmake cmake-gui gcc-gfortran gcc-c++ flex bison \
       blas blas-devel  lapack lapack-devel cfitsio cfitsio-devel \
       wcslib wcslib-devel ncurses ncurses-devel readline readline-devel\
       python-devel boost boost-devel fftw fftw-devel hdf5 hdf5-devel\
       numpy boost-python 

Various parts of casacore require measures data, which requires regular updating. You can obtain the WSRT measures archive from the ASTRON FTP server:

ftp://ftp.astron.nl/outgoing/Measures/

Extract this somewhere on a permanent location on your filesystem.

In the casacore source folder run:

mkdir build
cd build
cmake ..
make 
make install

there are various flags available to cmake to enable and disable options:

$ cmake -DUSE_FFTW3=ON -DDATA_DIR=/usr/share/casacore/data -DUSE_OPENMP=ON \
    -DUSE_HDF5=ON -DBUILD_PYTHON=ON -DUSE_THREADS=ON

The DATA_DIR should point to the location where you extracted the measures data. Special variables %CASAROOT% and %CASAHOME% can be used here, which can be set at run time through the .casarc file.

We have expirmental support for Python3 now. You can build python3 support using -DBUILD_PYTHON3=on. Note that CMake may have problems detecting the correct python3 libraries and headers, so probably you need to set them manually. For example:

-DPYTHON3_LIBRARY=/usr/lib/x86_64-linux-gnu/libpython3.4m.so
-DPYTHON3_INCLUDE_DIR=/usr/include/python3.4

To configure Python2 specific settings use:

PYTHON2_EXECUTABLE
PYTHON2_LIBRARY
PYTHON2_INCLUDE_DIR

To configure Python3 specific settings use:

PYTHON3_EXECUTABLE
PYTHON3_LIBRARY
PYTHON3_INCLUDE_DIR

If you run into problems with boost libraries, try setting -DBoost_NO_BOOST_CMAKE=True. This will be necessary if you have the libraries from NRAO casa in your PATH or LD_LIBRARY_PATH.

Casacore is part of the kern suite, which supplies precompiled binaries for Ubuntu 14.04 and 16.04

http://casacore.github.io/casacore

If you have any issues compiling or using casacore, please open an issue on the issue tracker on github.

If you have patches please open a pull request. Your contributions are more than welcome! But to maintain a high code quality we have written a contribution manual, please read that first.