Adafruit's ADS1X15 C++ library is compatible with various Arduinos. This fork modifies the library to be compatible with Raspberry Pi by using the wiringPi library to do the i2c communications instead of Arduino's wiring.h library. Note that there already exists an ADS1X15 Python library for RPi written by Adafruit: https://github.com/adafruit/Adafruit_Python_ADS1x15. In my case I needed to integrate the library with other C++ code so I made this fork.

[Tested on Raspberry Pi Zero W running Raspbian Jessie]

These instructions will get you a copy of the project up and running on your local machine for development and testing purposes.

Install wiringPi: http://wiringpi.com/download-and-install/

Enable RPi's SPI and I2C interfaces:

sudo raspi-config
# then go to "Interfacing Options"
# and enable SPI and I2C

Clone this repository:

cd ~
git clone https://github.com/hallgrimur1471/Adafruit_ADS1X15_RPi.git

Now compile, say, the differential_rpi.c example:

cd ~/Adafruit_ADS1X15_RPi
g++ -W -lwiringPi -o differential_rpi examples/differential_rpi.c Adafruit_ADS1015.cpp

And run it:

./differential_rpi

The program should now output ADS1X15's measurements.

Note that the differential_rpi.c example assumes you have the ADS1X15 circuit wired for differential measurements (see https://learn.adafruit.com/adafruit-4-channel-adc-breakouts/signal-connections).

Driver for TI's ADS1015: 12-bit Differential or Single-Ended ADC with PGA and Comparator

• ATmega328 @ 16MHz : Arduino UNO, Adafruit Pro Trinket 5V, Adafruit Metro 328, Adafruit Metro Mini
• ATmega328 @ 12MHz : Adafruit Pro Trinket 3V
• ATmega32u4 @ 16MHz : Arduino Leonardo, Arduino Micro, Arduino Yun, Teensy 2.0
• ATmega32u4 @ 8MHz : Adafruit Flora, Bluefruit Micro
• ESP8266 : Adafruit Huzzah
• ATmega2560 @ 16MHz : Arduino Mega
• ATSAM3X8E : Arduino Due
• ATSAM21D : Arduino Zero, M0 Pro
• ATtiny85 @ 16MHz : Adafruit Trinket 5V
• ATtiny85 @ 8MHz : Adafruit Gemma, Arduino Gemma, Adafruit Trinket 3V