RT hydro about rts-gmlc HOT 7 CLOSED

The hydro generation is passed to the RT from the DA run with the "Pass Fixed Load" data file and the "RT Run" scenario.

from rts-gmlc.

@oconnellm Thanks for the answer. Does that mean the RT hydro data is available only inside PLEXOS? Can we have the RT data in cvs files?

from rts-gmlc.

To expand on the previous comment...

The hydro generation profiles are fixed in the DA runs. This fixed generation profile is also used in the RT run, but instead of using the same input data file (you can't because the RT run is 5 minute interval while the DA is hourly) you must pass the DA hydro generation values to the RT run. So the RT run is still using the same generation profile as the DA run, just not accessing it through the same data file.

from rts-gmlc.

@kibaekkim the RT hydro data is only available as an output from PLEXOS. We input hourly generation data and it converts that to 5 minute generation to match the energy from the hourly generation data. (by ramping up and then down to achieve the same energy generated)

from rts-gmlc.

@oconnellm Does that mean the hydro generation is controllable for 5-minute interval dispatch for fixed hourly dispatch?

from rts-gmlc.

@kibaekkim No. The 5-minute dispatch is also fixed.

from rts-gmlc.

@oconnellm Is there any hope that PLEXOS can export the 5-minute hydro dispatch to a file so that non-PLEXOS users can use it?

from rts-gmlc.