gowired / gowired-project Goto Github PK

GetWired New Firmware/main.ino file contains

#include "SHTSensor.h"

I can't find this file anywhere. Should that include be removed?

Today I spend some time to upgrade the software on some MCU modules (2SSR & RGBW) from 1.2.0 to the new 1.3.0 release but had to roll back to 1.2.0 because of restarting node issues. It appeared to be an issue with the digital inputs, as soon as I disabled the PIRs connected to the inputs the restarting issue went away. I did not had the time to dig deeper, but will try to have another look at it soon. Any idea how to troubleshoot this kind of issue? I am using a MQTT enabled gateway.

I see the define MY_OTA_FIRMWARE_FEATURE - enables firmware-over-the-wire updates (defined by default)，but how to?is there use some other bootloader?

I am using openHAB as home automation controller in combination with GoWired and receive events over MQTT. Since I have added the topics for power and error readings the openHAB logging started to show the following warnings:

[WARN ] [ab.binding.mqtt.generic.ChannelState] - Incoming payload ' 0' not supported by type 'NumberValue'

It appears to be an issue with the power reading as can be seen on the following mosquitto_sub logging:

gwo/7/9/1/0/17 30
gwo/7/9/1/0/17  0  <-- there is a leading space in front of the 0

When for instance the lighting is turned off the reported value goes to ' 0' where I expected it to be '0'.

Is this intended or a bug?

I'm getting following error when compiling Gateway-MQTT
Arduino: 1.8.13 (Windows 10), Board: "ATmega328, No bootloader, EEPROM retained, 328PB, BOD 2.7V, LTO disabled, External 8 MHz"

c:/rob/arduino-1.8.13/hardware/tools/avr/bin/../lib/gcc/avr/7.3.0/../../../../avr/bin/ld.exe: C:\Users\WJCWSM~1.EUR\AppData\Local\Temp\arduino_build_885427/Gateway-MQTT.ino.elf section .data' will not fit in region text'

c:/rob/arduino-1.8.13/hardware/tools/avr/bin/../lib/gcc/avr/7.3.0/../../../../avr/bin/ld.exe: region `text' overflowed by 70 bytes

collect2.exe: error: ld returned 1 exit status

exit status 1

Error compiling for board ATmega328.
Using UIPEthernet version 2.0.9
and MySensors version 2.3.2

->Tis<- is software for GetWired Home Automation Modules by Domatic, open home automation hardware previously released at >>>openhardware.io<<< (page not working).