gl-inet / glinet Goto Github PK
View Code? Open in Web Editor NEWAll ipks for GL.iNet's official firmware.
All ipks for GL.iNet's official firmware.
Also posted on forum
Current Version 3.027
Compile Time 2019-09-19 16:32:41
Last Update 3.027
GL-AR750
DNS Rebinding Attack Protection: Yes
Override DNS Settings for All Clients: Yes
DNS over TLS from Cloudflare: Yes
If I reboot the GL-AR750, then SSH into it and run
root@GL-AR750:/etc/init.d# nslookup google.com
Server: 213.120.234.42
Address: 213.120.234.42#53
Name: google.com
Address 1: 216.58.210.206
Address 2: 2a00:1450:4009:809::200e
It is using the DNS resolvers of my ISP!!!
If I then toggle DNS over TLS from Cloudflare:
And re-run I get:
root@GL-AR750:/etc/init.d# nslookup google.com
^[[A
Server: 127.0.0.1
Address: 127.0.0.1#53
Name: google.com
Address 1: 172.217.169.14
Address 2: 2a00:1450:4009:809::200e
Presumably it is now using DNSmasq, which is forwarding them on
If I toggle it again to 'on' again I get:
root@GL-AR750:/etc/init.d# nslookup google.com
Server: 127.0.0.1
Address: 127.0.0.1#53
Name: google.com
Address 1: 216.58.204.78
Address 2: 2a00:1450:4009:81b::200e
Hopefully it is now sending the request to DNSmasq, which forwards to stubby on 127.0.0.1#5353 and on to cloudflare.
My syslog logs
2019-11-20 11:40:47 Information GL-AR750 kern kernel [ 70.275287] device wlan1 entered promiscuous mode
2019-11-20 11:40:47 Information GL-AR750 kern kernel [ 70.269364] br-lan: port 3(wlan1) entered disabled state
2019-11-20 11:40:47 Information GL-AR750 kern kernel [ 70.263805] br-lan: port 3(wlan1) entered blocking state
2019-11-20 11:40:47 Notice GL-AR750 daemon hostapd wlan0: interface state UNINITIALIZED->HT_SCAN
2019-11-20 11:40:47 Notice GL-AR750 user ucitrack Setting up /etc/config/system reload dependency on /etc/config/dhcp
2019-11-20 11:40:47 Notice GL-AR750 daemon pppd secondary DNS address 213.120.234.38
2019-11-20 11:40:47 Notice GL-AR750 daemon pppd primary DNS address 213.120.234.42
2019-11-20 11:40:47 Notice GL-AR750 daemon pppd remote IP address xxx.16.10.xxx
2019-11-20 11:40:47 Notice GL-AR750 daemon pppd local IP address xxx.198.233.xxx
2019-11-20 11:40:47 Notice GL-AR750 daemon pppd peer from calling number A4:7B: authorized
2019-11-20 11:40:47 Notice GL-AR750 daemon pppd CHAP authentication succeeded
2019-11-20 11:40:47 Information GL-AR750 daemon pppd CHAP authentication succeeded: CHAP authentication success
2019-11-20 11:40:47 Information GL-AR750 daemon dnsmasq-dhcp read /etc/ethers - 0 addresses
2019-11-20 11:40:47 Information GL-AR750 daemon dnsmasq read /tmp/hosts/dhcp.cfg01411c - 11 addresses
2019-11-20 11:40:47 Information GL-AR750 kern kernel [ 70.045029] device wlan0 entered promiscuous mode
2019-11-20 11:40:47 Information GL-AR750 kern kernel [ 70.039133] br-lan: port 2(wlan0) entered disabled state
2019-11-20 11:40:47 Information GL-AR750 kern kernel [ 70.033564] br-lan: port 2(wlan0) entered blocking state
2019-11-20 11:40:47 Information GL-AR750 daemon dnsmasq read /etc/hosts - 4 addresses
2019-11-20 11:40:47 Information GL-AR750 daemon dnsmasq using local addresses only for domain local
2019-11-20 11:40:47 Information GL-AR750 daemon dnsmasq using nameserver 127.0.0.1#53535
2019-11-20 11:40:47 Information GL-AR750 daemon dnsmasq using local addresses only for domain bind
2019-11-20 11:40:47 Information GL-AR750 daemon dnsmasq using local addresses only for domain invalid
2019-11-20 11:40:47 Information GL-AR750 daemon dnsmasq using local addresses only for domain local
2019-11-20 11:40:47 Information GL-AR750 daemon dnsmasq using local addresses only for domain localhost
2019-11-20 11:40:47 Information GL-AR750 daemon dnsmasq using local addresses only for domain onion
2019-11-20 11:40:47 Information GL-AR750 daemon dnsmasq using local addresses only for domain test
2019-11-20 11:40:47 Information GL-AR750 daemon dnsmasq-dhcp DHCP, IP range 192.16 -- 192.168, lease time 12h
2019-11-20 11:40:47 Information GL-AR750 daemon dnsmasq compile time options: IPv6 GNU-getopt no-DBus no-i18n no-IDN DHCP DHCPv6 no-Lua TFTP conntrack ipset auth DNSSEC no-ID loop-detect inotify dumpfile
2019-11-20 11:40:47 Information GL-AR750 daemon dnsmasq started, version 2.80test2 cachesize 150
2019-11-20 11:40:47 Notice GL-AR750 daemon pppd Connect: pppoe-wan <--> eth0
2019-11-20 11:40:47 Information GL-AR750 daemon pppd Using interface pppoe-wan
2019-11-20 11:40:47 Information GL-AR750 kern kernel [ 69.968494] pppoe-wan: renamed from ppp0
2019-11-20 11:40:47 Information GL-AR750 kern kernel [ 69.960567] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
2019-11-20 11:40:47 Information GL-AR750 kern kernel [ 69.936684] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
2019-11-20 11:40:47 Notice GL-AR750 user ucitrack Setting up /etc/config/system reload dependency on /etc/config/luci_statistics
2019-11-20 11:40:47 Notice GL-AR750 user ucitrack Setting up /etc/config/system reload trigger for non-procd /etc/init.d/led
2019-11-20 11:40:46 Notice GL-AR750 user ucitrack Setting up /etc/config/dhcp reload dependency on /etc/config/odhcpd
2019-11-20 11:40:46 Notice GL-AR750 user ucitrack Setting up /etc/config/firewall reload dependency on /etc/config/sqm
2019-11-20 11:40:46 Notice GL-AR750 user ucitrack Setting up /etc/config/firewall reload dependency on /etc/config/miniupnpd
2019-11-20 11:40:46 Notice GL-AR750 user ucitrack Setting up /etc/config/firewall reload dependency on /etc/config/qos
2019-11-20 11:40:46 Notice GL-AR750 user ucitrack Setting up /etc/config/firewall reload dependency on /etc/config/luci-splash
2019-11-20 11:40:45 Information GL-AR750 daemon dnsmasq exiting on receipt of SIGTERM
2019-11-20 11:40:45 Notice GL-AR750 user ucitrack Setting up /etc/config/wireless reload dependency on /etc/config/network
2019-11-20 11:40:45 Notice GL-AR750 user ucitrack Setting up /etc/config/network reload dependency on /etc/config/radvd
2019-11-20 11:40:45 Notice GL-AR750 user ucitrack Setting up /etc/config/network reload dependency on /etc/config/dhcp
2019-11-20 11:40:45 Error GL-AR750 daemon stubby Could not schedule query: None of the configured upstreams could be used to send queries on the specified transports
2019-11-20 11:40:45 Error GL-AR750 daemon stubby Could not schedule query: None of the configured upstreams could be used to send queries on the specified transports
2019-11-20 11:40:45 Error GL-AR750 daemon stubby Could not schedule query: None of the configured upstreams could be used to send queries on the specified transports
2019-11-20 11:40:45 Error GL-AR750 daemon stubby Could not schedule query: None of the configured upstreams could be used to send queries on the specified transports
2019-11-20 11:40:44 Error GL-AR750 daemon stubby Could not schedule query: None of the configured upstreams could be used to send queries on the specified transports
2019-11-20 11:40:44 Error GL-AR750 daemon stubby Could not schedule query: None of the configured upstreams could be used to send queries on the specified transports
2019-11-20 11:40:44 Error GL-AR750 daemon stubby Could not schedule query: None of the configured upstreams could be used to send queries on the specified transports
2019-11-20 11:40:44 Error GL-AR750 daemon stubby Could not schedule query: None of the configured upstreams could be used to send queries on the specified transports
2019-11-20 11:40:44 Warning GL-AR750 daemon pppd Connected to a4:7b:2c:56:8f:61 via interface eth0
2019-11-20 11:40:44 Error GL-AR750 daemon stubby Could not schedule query: None of the configured upstreams could be used to send queries on the specified transports
2019-11-20 11:40:44 Error GL-AR750 daemon stubby Could not schedule query: None of the configured upstreams could be used to send queries on the specified transports
2019-11-20 11:40:44 Information GL-AR750 daemon pppd PPP session is 468
2019-11-20 11:40:44 Notice GL-AR750 daemon pppd pppd 2.4.7 started by root, uid 0
2019-11-20 11:40:44 Information GL-AR750 daemon pppd RP-PPPoE plugin version 3.8p compiled against pppd 2.4.7
2019-11-20 11:40:44 Information GL-AR750 daemon pppd Plugin rp-pppoe.so loaded.
2019-11-20 11:40:44 Error GL-AR750 daemon hostapd Configuration file: /var/run/hostapd-phy1.conf
2019-11-20 11:40:42 Error GL-AR750 daemon stubby [11:40:42.793866] STUBBY: Starting DAEMON....
2019-11-20 11:40:42 Error GL-AR750 daemon stubby [11:40:42.792644] STUBBY: (NOTE a Strict Profile only applies when TLS is the ONLY transport!!)
2019-11-20 11:40:42 Error GL-AR750 daemon stubby [11:40:42.791403] STUBBY: Privacy Usage Profile is Strict (Authentication required)
2019-11-20 11:40:42 Error GL-AR750 daemon stubby [11:40:42.783889] STUBBY: - TLS
2019-11-20 11:40:42 Error GL-AR750 daemon stubby [11:40:42.782698] STUBBY: Transport list is:
2019-11-20 11:40:42 Error GL-AR750 daemon stubby [11:40:42.781447] STUBBY: DNSSEC Validation is OFF
2019-11-20 11:40:42 Error GL-AR750 daemon stubby [11:40:42.713636] STUBBY: Read config from file /etc/stubby/stubby.yml
2019-11-20 11:40:42 Error GL-AR750 daemon hostapd Configuration file: /var/run/hostapd-phy0.conf
2019-11-20 11:40:42 Warning GL-AR750 kern kernel [ 64.643534] Version:3.0.5 Date:201801210
2019-11-20 11:40:41 Warning GL-AR750 kern kernel [ 64.322260] ip12:192.168.9.1 lan_ip[1].IP=c0a80901
2019-11-20 11:40:41 Warning GL-AR750 kern kernel [ 64.317208] ip11:192.168.1.1 lan_ip[0].IP=c0a80101
2019-11-20 11:40:41 Error GL-AR750 daemon rmmod module is not loaded
2019-11-20 11:40:41 Error GL-AR750 daemon odhcp6c Failed to send DHCPV6 message to ff02::1:2 (Address not available)
2019-11-20 11:40:41 Error GL-AR750 daemon odhcp6c Failed to send RS (Address not available)
2019-11-20 11:40:40 Error GL-AR750 daemon insmod module is already loaded - pppoe
2019-11-20 11:40:40 Error GL-AR750 daemon insmod module is already loaded - pppox
2019-11-20 11:40:40 Error GL-AR750 daemon insmod module is already loaded - ppp_generic
2019-11-20 11:40:40 Error GL-AR750 daemon insmod module is already loaded - slhc
2019-11-20 11:40:39 Notice GL-AR750 daemon netifd Interface 'wan6' is setting up now
2019-11-20 11:40:39 Notice GL-AR750 daemon netifd Interface 'wan6' has link connectivity
2019-11-20 11:40:39 Notice GL-AR750 daemon netifd Interface 'wan' is setting up now
2019-11-20 11:40:39 Notice GL-AR750 daemon netifd Interface 'wan' has link connectivity
2019-11-20 11:40:39 Notice GL-AR750 daemon netifd Network device 'eth0' link is up
2019-11-20 11:40:39 Information GL-AR750 kern kernel [ 62.283146] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
2019-11-20 11:40:39 Information GL-AR750 kern kernel [ 62.278424] eth0: link up (100Mbps/Full duplex)
2019-11-20 11:40:39 Information GL-AR750 kern kernel [ 61.924694] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
2019-11-20 11:40:39 Notice GL-AR750 daemon netifd Interface 'lan' has link connectivity
2019-11-20 11:40:39 Notice GL-AR750 daemon netifd bridge 'br-lan' link is up
2019-11-20 11:40:39 Notice GL-AR750 daemon netifd VLAN 'eth1.1' link is up
2019-11-20 11:40:39 Information GL-AR750 kern kernel [ 61.809022] br-lan: port 1(eth1.1) entered forwarding state
2019-11-20 11:40:39 Information GL-AR750 kern kernel [ 61.803383] br-lan: port 1(eth1.1) entered blocking state
2019-11-20 11:40:39 Notice GL-AR750 daemon netifd Network device 'eth1' link is up
2019-11-20 11:40:39 Information GL-AR750 kern kernel [ 61.681291] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
2019-11-20 11:40:39 Information GL-AR750 kern kernel [ 61.676485] eth1: link up (1000Mbps/Full duplex)
2019-11-20 11:40:38 Information GL-AR750 daemon logread Logread connected to 192.16
So it looks as if DNSmasq starts properly. Not so sure about stubby, but looks as if it is using the DHCP DNS not the loopback address.
Any plans to update the repo to include 3.102 firmware for MT300N-V2 ?
Thanks in advance
Subversion server self startup failed. System version openwrt19.07. How to solve this problem?
When you travel a lot and you're often in areas with lots of WiFi networks it's kind of annoying to select the SSID from the drop down menu. The scroll bar becomes very long an this is especially bad on a mobile phone.
A list with a button to join the network would provide a much better usability. In addition I would really love to see an interface that allows to filter networks (e.g. by signal strength and open/closed networks). Here is an example from a WiFi scanner app I use on my phone:
In addition the scan often misses a lot of networks and the scan needs to be performed multiple times. You could probably perform multiple scans in the background and have a button that could be clicked to add networks, found by additional scans, to the list.
Not sure if this is the right place to post this, but here's what I saw:
I am using a gl-ar750s and attempted to add a port forwarding rule using the "beta" admin UI. Everything looked okay, but I could not connect to the device. I went into the advanced system configuration UI (through LuCI) and added the port forwarding rule there. Voila. Everything worked as I expected.
I am sure that I am doing something stupid, but couldn't see it. I searched the support forums for a related issue but couldn't find anything. I am happy to provide specifics if necessary.
Thanks for a great product. Seriously. This is a great device!
images.json references the package gl-ble_cfg_router_telink for device MT1300, but it is actually missing from /ramips/
(removed during commit "update 3.216 packages" )
workaround: copy from previous version (3.215)
E.g. https://fw.gl-inet.com/firmware/mt300n-v2/v1/openwrt-mt300n-v2-3.203-0701.bin
This XML file does not appear to have any style information associated with it. The document tree is shown below.
NoSuchKey
The specified key does not exist.
firmware/mt300n-v2/v1/openwrt-mt300n-v2-3.203-0701.bin
T9FJ2ZWPPXS47QSR
Q+aLtNOCSv5JG2LchKd8iY0MNY52HnE37mPDLxjME71Xe9ZgNEOG0NFqRR4GW7jORXfrhor6GB0=
I would like to set up https://www.netmaker.org/ netclient in GL-MT300N-V2.
Is there any guide on building and installing GL-MT300N-V2 or similar devices from gl-inet?
@lancersky Is there any option to install https://github.com/AdguardTeam/AdGuardHome
on S1300?
I am currently using MT300N-v2-3.102, which firm uses openssl 1.0.1o, stunnel works properly
After upgrading to MT300N-v2-3..105, stunnel report error, libssl.1.0.0 and libcryp*1.0.0 not found
After investigating, found openssl 1.0.1 has been upgraded to 1.1.1, meanwhile, libssl.1.0.0 upgraded to libssl.1.1
BUT
stunnel still compiled with openssl.1.0.1, libssl.1.0.0 not found
TRY
I have tried to link libssl.1.1 -> libssl.1.0.0, seems work properly
but libcryptal link failed
So, fully recompile for stunnel is required.
BTW. any package using dynamic openssl might face the same problem.
Before all ppl upgraded to openssl 1.1.1, two repo might be necessary as two openssl dependent might conflict , one for version<105, one for >=105 might be necessary
When building new FW using:
"profile": "glinet_gl-x750-nor", "version": "3.201", "imagebuilder": "3.5/openwrt-imagebuilder-ath79-nand_3.5",
The included version of bletool has a memory management issue.
More information can be found at: gl-inet/bletool#4
On the GL-E750, turning the mobile Internet modem on-off is complicated, because I don't want to log in to the admin panel from my phone, I don't consider it safe enough. This means that I can't turn the modem off when I don't have access to my laptop. This is not only a problem because of bandwidth overuse, but also because the device has an overheat problem, indeed it's possible that I already cooked some of the antenna, because 5Ghz is not working as it used to do. Although this might be a software problem as well.
Regardless, being able to turn off the modem would be really helpful, even if it wouldn't solve the entire overheat problem, but at least it would be possible to use only wi-fi as Internet source which produces less heat. And from the perspective of using up all the monthly 3G/4G allowance, it would be an absolute win.
Is there any way to get native PPoA support on the routers in 'cable mode'?
I noticed in my GL-SF1200 that the list of devices connected to wifi only shows some devices and not others. I'm sure there are other device connected to wifi but not showed.
In the gl.inet web gui the devices are incorectly morked as offline device.
In the luci gui tey are simply not showed.
Another issue ar the TX rate showed in wireless page of luci,
the rate showed for device in some case are slower then real.
Wireless administration page is not provided in menu.
Attempting to access http://192.168.8.1/cgi-bin/luci/admin/network/wireless/radio0.network1
results in a 404 Not Found error
Sorry, the object you requested was not found.
Unable to dispatch: /cgi-bin/luci/admin/network/wireless/radio0.network1
Thanks for fixing this.
A declarative, efficient, and flexible JavaScript library for building user interfaces.
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
An Open Source Machine Learning Framework for Everyone
The Web framework for perfectionists with deadlines.
A PHP framework for web artisans
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
Some thing interesting about web. New door for the world.
A server is a program made to process requests and deliver data to clients.
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
Some thing interesting about visualization, use data art
Some thing interesting about game, make everyone happy.
We are working to build community through open source technology. NB: members must have two-factor auth.
Open source projects and samples from Microsoft.
Google ❤️ Open Source for everyone.
Alibaba Open Source for everyone
Data-Driven Documents codes.
China tencent open source team.